嵌入式專業課程設計電子詞典硬件設計樣本(共68頁)

1、嵌入式專業課程設計電子詞典硬件設計上海電力學院嵌入式系統課程設計報告題目： 電子詞典的設計 姓 名： 學 號： 院系： 專業年級： 同組成員： 年月日一、實驗內容及要求在LCD屏幕左側繪制出單詞輸入框和釋義顯示框以及一個搜索鍵，右側繪制4*4鍵盤按鈕，模擬出簡易電子詞典的功能，按鈕操作用觸摸屏或鍵盤實現均可。實現功能：（1）LCD屏幕上顯示4*4鍵盤，顯示單詞及其翻譯、例句。（2）一個鍵可完成2個英文字母的輸入，如左上角第一個鍵可實現輸入a,b兩個字母，第一次按下時為輸入a，如果需輸入b，只需連續快速按鍵兩次即可。（3）在輸入完單詞后，點擊搜索鍵，即可在釋義顯示框中顯示該單詞的詞性、中文解釋、

2、示例詞組和句子等。（4）當發現輸入的單詞在庫中不存在時，可實現將該單詞添加入庫的操作。二、設計思路（1）通過LCD顯示模塊畫出電子詞典操作界面。（2）對應界面中各鍵的位置設置鍵盤對應鍵值。（3）設定功能鍵，實現以下3個功能：退格鍵：刪除最后一位字母；搜索保存鍵：對輸入框的單詞進行判斷，若單詞存在于詞庫中，則顯示單詞詞性、詞義、例句；若單詞不存在則自動進行保存；轉換鍵：按下后，字母鍵輸出對應的第二個字母。（4）按鍵后賦值并顯示。三、軟件構架開始LCD模塊鍵盤模塊結束四、模塊分析（1）鍵盤模塊流程圖：開始鍵盤初始化鍵盤是否按下Y讀取鍵值是否是功能鍵YN執行功能賦值顯示結束N源代碼：/* File：

3、* Author:embest* Desc：keyboard source code* History:*/*- include files -*/#include #include #include #include #include #include #ifndef KEY_INT#define KEY_INT#endif#ifndef BUT_INT#define BUT_INT#endif/*- global variables -*/int input_char,n=0;char word20;int wordIndex=0;int x = 15;int num=0;int coun

4、ter=0;/* keyboard control address */volatile UCHAR *keyboard_base = (UCHAR *)0x06000000;/*- function declare -*/void init_keyboard();void close_keyboard();void KeyboardInt(void);/ _attribute_ (interrupt (IRQ);void Eint4567Isr(void);/ _attribute_ (interrupt (IRQ);/*- function code -*/* name:Test_Keyb

5、oard* func:test keyboard* para:none* ret:none* modify:* comment:*/void Test_Keyboard()Uart_Printf(n Keyboard Test Examplen);Uart_Printf(n Please press one key on keyboard and look at LED .n);/ init keyboardinit_keyboard();while(1);/ close keyboard/ close_keyboard();/* name:init_keyboard* func:init k

6、eyboard interrupt* para:none* ret:none* modify:* comment:*/extern void isrEINT1(void);extern void isrEint4567(void);void init_keyboard()/* enable interrupt */rINTMOD = 0x0;rINTCON = 0x1;/* set EINT1 interrupt handler */rINTMSK =(BIT_GLOBAL|BIT_EINT1|BIT_EINT4567); pISR_EINT1 = (int)isrEINT1; pISR_EI

7、NT4567 = (int)isrEint4567; /* PORT G */ rPCONG = 0xffff;/ EINT70rPUPG = 0x0;/ pull up enable rEXTINT = rEXTINT|0x20;/ EINT1 falling edge moderI_ISPC = BIT_EINT1|BIT_EINT4567;/ clear pending bitrEXTINTPND = 0xf;/ clear EXTINTPND reg/* name:close_keyboard* func:close keyboard interrupt* para:none* ret

8、:none* modify:* comment:*/void close_keyboard()pISR_EINT1 = NULL;pISR_EINT4567 = NULL;/* Mask interrupt */rINTMSK = rINTMSK | BIT_EINT1 | BIT_EINT4567;/* name:KeyboardInt* func:keyboard interrupt handler function* para:none* ret:none* modify:* comment:*/void KeyboardInt(void)int nTemp,i,j,k,m=0;char

9、 bbyte;rI_ISPC = BIT_EINT1;/ clear pending bitchar pbyte10;nTemp = key_read();if(nTemp -1) / Lcd_Draw_HLine(10, 310, 80, WHITE, 50);input_char = nTemp;Lcd_DspAscII8x16(15,45,WHITE,word);switch(input_char) case 0: num=1;break; case 1: num=2;break; case 2: num=3;break; case 3: num=4;break; case 4: num

10、=5;break; case 5: num=6;break; case 6: num=7;break; case 7: num=8;break; case 8: num=9;break; case 9: counter=1;break; case 10: counter=2;break; case 11: counter=3;break; case 12: m=1; Lcd_Draw_HLine(15+n-10, 15+n, 45, WHITE, 16); n-=10; wordwordIndex=0; wordIndex-; break; /*if(n=0) word20=0; wordIn

11、dex=0; Lcd_Draw_HLine(10, 310,85, WHITE, 160); break;*/ case 13: wordwordIndex=0; wordIndex=0; for(i=0;i20;i+) if(strcmp(word,vocabi.c)=0) j=0; k=i; break; else j=1; if(j=0) /#ifdef Eng_v Lcd_DspAscII8x16(15,40,BLUE,vocabk.c);Lcd_DspAscII8x16(15,60,BLUE,vocabk.d);Lcd_DspAscII8x16(15,80,BLUE,vocabk.f

12、);/#elseLcd_DspHz16(15,100,BLUE,vocabk.e);/#endif else Lcd_DspHz16(15,120,BLUE,未找到相應的單詞); DelayMs(600); Lcd_DspHz16(15,120,WHITE,未找到相應的單詞); break; case 14: wordwordIndex=0; wordIndex=0; for(i=0;ix0) for(i = 0; i 20; i+) vocabx.ci=wordi; wordi=0; Lcd_DspAscII8x16(15,40,BLUE,vocabx.c); x+; else x=15;

13、/Lcd_DspAscII8x16(15,45,BLUE,word); for(i = 0; i 20; i+) wordi=0; break; case 15: /Lcd_Draw_Box(10,40,310,80,GREEN); break; if(num!=0&counter!=0) switch(3*(num-1)+counter-1) case 0: bbyte=a;break; case 1: bbyte=b;break; case 2: bbyte=c;break; case 3: bbyte=d;break; case 4: bbyte=e;break; case 5: bby

14、te=f;break; case 6: bbyte=g;break; case 7: bbyte=h;break; case 8: bbyte=i;break; case 9: bbyte=j;break; case 10: bbyte=k;break; case 11: bbyte=l;break; case 12: bbyte=m;break; case 13: bbyte=n;break; case 14: bbyte=o;break; case 15: bbyte=p;break; case 16: bbyte=q;break; case 17: bbyte=r;break; case

15、 18: bbyte=s;break; case 19: bbyte=t;break; case 20: bbyte=u;break; case 21: bbyte=v;break; case 22: bbyte=w;break; case 23: bbyte=x;break; case 24: bbyte=y;break; case 25: bbyte=z;break; case 26: bbyte=y;break; num=0;counter=0; if(m=0) wordwordIndex=bbyte; wordIndex+; /n+=10; Lcd_DspAscII8x16(15,21

16、0,BLUE,word); / Uart_Printf(Key is:%x r,input_char); /* name:key_read* func:read key value* para:none* ret:key value, -1 - error* modify:* comment:*/inline int key_read()int value;char temp;/* read line 1 */temp = *(keyboard_base+0xfd);/* not 0xF mean key down */if( temp & KEY_VALUE_MASK) != KEY_VAL

17、UE_MASK)if( (temp&0x1) = 0 )value = 3;else if( (temp&0x2) = 0 )value = 2;else if( (temp&0x4) = 0 )value = 1;else if( (temp&0x8) = 0 )value = 0;while( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK) / releasetemp = *(keyboard_base+0xfd);return value;/* read line 2 */temp = *(keyboard_base+0xfb);/* not 0xF

18、mean key down */if( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK)if( (temp&0x1) = 0 )value = 7;else if( (temp&0x2) = 0 )value = 6;else if( (temp&0x4) = 0 )value = 5;else if( (temp&0x8) = 0 )value = 4;while( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK) / releasetemp = *(keyboard_base+0xfb);return value;/* r

19、ead line 3 */temp = *(keyboard_base+0xf7);/* not 0xF mean key down */if( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK)if( (temp&0x1) = 0 )value = 0xb;else if( (temp&0x2) = 0 )value = 0xa;else if( (temp&0x4) = 0 )value = 9;else if( (temp&0x8) = 0 )value = 8;while( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK

20、) / releasetemp = *(keyboard_base+0xf7);return value;/* read line 4 */temp = *(keyboard_base+0xef);/* not 0xF mean key down */if( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK)if( (temp&0x1) = 0 )value = 0xf;else if( (temp&0x2) = 0 )value = 0xe;else if( (temp&0x4) = 0 )value = 0xd;else if( (temp&0x8) = 0

21、 )value = 0xc;while( temp & KEY_VALUE_MASK) != KEY_VALUE_MASK) / releasetemp = *(keyboard_base+0xef);return value;return -1;/* name:Eint4567Isr* func:* para:none* ret:none* modify:* comment:*/void Eint4567Isr(void)unsigned char which_int;Uart_Printf(n SB2 or SB3 had pressed and light LED.); which_in

22、t=rEXTINTPND; rEXTINTPND=0xf;/clear EXTINTPND reg. rI_ISPC=BIT_EINT4567;/clear pending_bit if(which_int = 4)/ SB2 Led_Display(0x0); Led_Display(0x1); else if(which_int = 8)/ SB3 Led_Display(0x0); Led_Display(0x2); （2）LCD模塊流程圖：開始LCD初始化顯示開機畫面顯示操作界面結束源代碼：/* File：* Author:embest* Desc：LCD control and di

23、splay functions* History:*/*- include files -*/#include /#include #include /*- global variables -*/INT32U aLcdActiveBufferLCD_YSIZELCD_XSIZE/4;/*- extern variables -*/extern const INT8U aucTempBitmap76800;/*- function code -*/* name:Lcd_Init()* func:Initialize LCD Controller* para:none* ret:none* mo

24、dify:* comment:*/void Lcd_Init (void) rDITHMODE=0x12210;rDP1_2 =0xa5a5; rDP4_7 =0xba5da65;rDP3_5 =0xa5a5f;rDP2_3 =0xd6b;rDP5_7 =0xeb7b5ed;rDP3_4 =0x7dbe;rDP4_5 =0x7ebdf;rDP6_7 =0x7fdfbfe; / disable,8B_SNGL_SCAN,WDLY=16clk,WLH=16clk,rLCDCON1=(0x0)|(25)|(MVAL_USED7)|(0x38)|(0x310)|(CLKVAL_COLOR12);/ L

25、INEBLANK=10 (without any calculation) rLCDCON2=(LINEVAL)|(HOZVAL_COLOR10)|(1021); rLCDCON3=0;/ 256-color, LCDBANK, LCDBASEUrLCDSADDR1= (0x322)1);rLCDSADDR2= M5D(unsigned int)aLcdActiveBuffer+(SCR_XSIZE*LCD_YSIZE)1) | (MVAL21);rLCDSADDR3= (LCD_XSIZE/2) | ( (SCR_XSIZE-LCD_XSIZE)/2)9 );/The following v

26、alue has to be changed for better display.rREDLUT =0xfdb96420; / 1111 1101 1011 1001 0110 0100 0010 0000rGREENLUT=0xfdb96420; / 1111 1101 1011 1001 0110 0100 0010 0000rBLUELUT =0xfb40; / 1111 1011 0100 0000rLCDCON1=(0x1)|(25)|(MVAL_USED7)|(0x38)|(0x310)|(CLKVAL_COLOR12);/rPDATE=rPDATE&0x0e;rPDATE=0x

27、fe;Lcd_Clr();/* name:Lcd_Clr()* func:clear LCD screen* para:none * ret:none* modify:* comment:*/void Lcd_Clr(void)INT32U i;INT32U *pDisp = (INT32U*)aLcdActiveBuffer;for (i = 0; i (SCR_XSIZE * SCR_YSIZE / 4); i+)*pDisp+ = ALLWHITE;/* name:LcdClrRect()* func:fill appointed area with appointed color* p

28、ara:usLeft,usTop,usRight,usBottom - areas rectangle acme coordinate*ucColor - appointed color value* ret:none* modify:* comment:also as clear screen function */void LcdClrRect(INT16 usLeft, INT16 usTop, INT16 usRight, INT16 usBottom, INT8U ucColor)INT32U i, j;INT8U *pDisp = (INT8U*)aLcdActiveBuffer;

29、for(i=usTop;i=usBottom;i+)for(j=usLeft;j=usRight;j+)LCD_PutPixel(j, i, ucColor);#ifdef MON_LCD/* name:LcdClrRect()* func:fill appointed area with appointed color* para:usLeft,usTop,usRight,usBottom - areas rectangle acme coordinate*ucColor - appointed color value* ret:none* modify:* comment:also as

30、clear screen function */void LcdClrRect(INT16 usLeft, INT16 usTop, INT16 usRight, INT16 usBottom, INT8U ucColor)INT16 i=0;INT16 k,l;INT16 m;INT32U ulColor = (ucColor 28) | (ucColor 24) | (ucColor 20) | (ucColor 16) | (ucColor 12) | (ucColor 8) | (ucColor 4) | ucColor;if(usRight-usLeft)=8)for(i=usTop

31、;i=usBottom;i+)for(m=usLeft;m=usRight;m+)LCD_PutPixel(m, i, ucColor);return;if(usLeft%8)=0)k=usLeft;elsek=(usLeft/8)*8+8;if( usRight%8)=0)l= usRight;elsel=( usRight/8)*8;for(i=usTop;i=usBottom;i+)for(m=usLeft;m=(k-1);m+)LCD_PutPixel(m, i, ucColor);for(m=k;ml;m+=8)(*(INT32U*)(aLcdActiveBuffer + i * SCR_XSIZE / 2 + m / 2) = ulColor;for(m=l;m= usDy & (usX0 usX1) | (usDy usDx) & (usY0 usY1) ) GUISWAP(usX1, usX0); GUISWAP(usY1, usY0); y_sign = (usY1 - usY0) / usDy; x_sign = (usX1 - usX0) / usDx; if( usDx = usDy ) for( wCurx = usX0, wCury = usY0, wNex