TS-450S中文說明書.doc

TO DO THIS PRESSTemporarily change the volume or frequency of the band thatcannot control暫時改變聲音或頻率的控制 E.CHGDetermine if a frequency is in use before transmitting靜噪 MONIThe LCD illumination lamp lights啟動LCD燈光 LAMPChange the frequency in 1MHz step改變頻率1MHZ步進 MHzVFO modeVFO模式 VFOMemory channel recall mode儲存頻道收回模式 MRActivate call channel function啟動呼叫頻道功能 CALLRecall the received message收回接收的信息 MSGExchange Main and Sub band content交換主要和次要波段內容 BANDActivate all function (blue letters)啟動全部功能（藍色字） FMemory date entering mode存儲信道輸入 MActivate tone encoder啟動音調編碼 TONEExchange dual band reception or single band reception交換雙波段或單波段接收 DUALSelect desired transmitter offset direction異頻（差頻） SHIFTActivate Band scan啟動波段掃描 VFO(1 second按1秒)Activate Memory channel scan啟動儲存頻道掃描 MR(1 second)Activate CALL scan啟動呼叫掃描 CALL(1 second)Select volume or encoder mode選擇音量或編碼模式 F then E.CHGThe LCD illumination lamp lights at all times背景燈光長亮 F then LAMPMemory shift儲存異頻模式 F then VFOActivate VFO/Memory scan啟動VFO/儲存掃描 F then MRActivate VFO/Memory Call scan啟動VFO/儲存呼叫頻道掃描 F then CALLTurn message function on or off旋轉信息功能開或關 F then NSGTurn automatic band change function on or off旋轉自動波段改變功能開或關 F then BANDActivate PAGING mode啟動尋呼 模式 F then 1Activate DTSS function啟動DTSS功能 F then 2Activate CTCSS function啟動CTCSS 功能 F then 3Activate alert function啟動警惕功能 F then 4Switching speaker output when a external spealer is connected外接揚聲器時開關揚聲器輸出 F then 6Turn CLOCK function on or off轉至?xí)r鐘功能開或關 F then 7Turn switch on timerfunction on or off轉至定時開機時間功能的開或關 F then 8Turn switch off timerfunction on or off轉至定時關機時間功能的開或關 F then 9Activate memory channel lock out function啟動儲存頻道鎖出功能 F then 0Turn KEY LOCK function on or off轉至鎖鍵功能開或關 F then MTurn TX STOP function on or off轉至停止TX功能開或關 F then f2Select transmit output power level選擇發射功率 F then TONEActivate duplex operation啟動雙工(一個波段發射,另一個接收)操作 F then DUALTurn reverse function on or off旋轉翻轉功能開或關（倒頻） F then SHIFTReturn the encoder to the original setting mode復位 F (1 second) then E.CHGRecalling stored DTMF cords調回儲存DTMF F (1 second) Then MHZTurn automatic power off function on or off旋轉自動開機關功能開或關 F (1second) Then VFOTurn battery saver function on or off旋轉節電功能開或關 F (1 second) Then MSignaling squelch function on or off信號壓縮功能開或關 F (1 second) Then CALLMessage memory recall信息儲存收回 F (1 second) then MSGActivate paging code selection mode啟動選擇尋呼號碼模式 F (1 second) then 1Activate DTSS code selection mode啟動選擇DTSS號碼模式 F (1 second) then 2Activate frequency step selection mode啟動選擇頻率步進模式 F (1 second) then 3Recall lower limit frequency of programmable band scan收回限制向下頻率可編程波段掃描 F (1 second) then 4Recall upper limit frequency of programmable band scan收回限制向上頻率可編程波段掃描 F (1 second) then 5Change the speaker output when a external speaker is connected外接揚聲器時改變揚聲器輸出 F (1 second) then 6Activate Time setting function啟動時間調整功能 F (1 second) then 7Switch-on timer setting mode接同時間調整模式 F (1 second) then 8Switch-off timer setting mode關閉時間調整模式 F (1 second) then 9Select tone frequency選擇音調頻率 F (1 second) then TONEEnter date into the call channel進入日期到呼叫頻道 M then CALLMessage memory buffer clearM (1 second) then NSGEnter displayed date in lower limit frequency of programmableVFO tuning limit進入顯示日期限制向下功能的可編程的VFO調諧限制M (1 second) then 1Enter displayed frequency in lower limit frequency ofprogrammable bandscan進入顯示頻率在限制向下功能的可編程波段掃描M (1 second) then 4Enter displayed frequency in upper limit frequency ofprogrammable bandscan進入顯示頻率在限制向上功能的可編程波段掃描M (1 second) then5Select encoder mode選擇編碼模式 E.CHG+POWERSelect 2 or 3 digit memory channel recall using numerickey pad選擇2-3個數字儲存頻道？MR+POWERTurn automatic shift function on or off旋轉自動異頻功能開或關 BAND+POWERReset VFO重新設置VFO F+POWERReset memory重新設置儲存 M+POWERTurn the message memory function on or off旋轉信息儲存功能開或關 f2+POWERAnswer-Back on or off回到原處開或關 MHz+POWERDelay time selection延遲時間選擇 1+POWERDTMF delay time selectionDTMF延遲時間選擇 2+POWERChannelized frequency display on or off顯示頻率開或關 3+POWERTurn earphone mode on or off旋轉耳機模式開或關 4+POWERSelection a beep s