家電產品中英文缺陷描述整理

1、家電產品通用缺陷整理包裝缺陷：包裝箱、裝箱帶：產品堆放戶外，部分紙箱滲水Some cartons of products piled outdoors are in the case of water seepage包裝方式錯誤Incorrect packing method / Different packing from approved sample包裝材料臟污、褶皺或破損Packing material with dirt, wrinkle and damage 金屬帶用于包裝Metal strapping is used for packing as the sharp edges

2、are harmful to man紙箱/彩箱 破損/撕裂 The carton/color box is broken or split包裝嚴重/輕微變形，且對產品造成/未造成損傷Serious/light deforming of packing with/without damage to product 外箱封箱紙松動 Carton glue tape looses封箱不良, 箱蓋開口Poorly sealing with the cover opening包裝箱實際尺寸與規格書不符The sizes of carton are different from spec包裝箱上重要信息遺

3、漏、錯誤或者不清晰，諸如貼紙格式、產品型號、logo、包裝箱尺寸、重量、原產地、批次等Missing, wrong or illegible of important information on packing such as the form of labeling, model #,logo, size of carton, weight, country of origin ，batch etc 包裝箱內產品倒裝The packing for product is upside-down彩箱褶皺 Color box crumples彩盒封口脫開 Breaking of the join

4、t on gift box包裝箱內漏裝泡沫或紙托Missing foam or paper holder for product protecting in the packing彩箱內少配件Missing accessories in the packing 生產批次號：包裝內沒有生產批次號Missing production patch number sealed in the packing包裝內生產批號不清晰Seal/label of production patch number in the packing is not clear to read說明書、執行標準、對應單：產品漏裝

5、說明書Missing production specification產品說明書皺折/破損 The product specification is folded/damaged包裝內說明書與產品不一致 Specification does not cover the product in the packing執行標準錯誤Instruction sheet is wrong執行標準缺失Missing the instruction sheet包裝箱內對應單錯誤Corresponding sheet of specification in the packing is wrong外觀：產品材料

6、/尺寸/顏色/logo/外觀與樣板有差異Material/size/color/logo/appearance of product is different from approved sample 警告標貼粘貼不良：警告標貼有破損 The warning label is damaged產品缺少警告標貼Missing the warning label產品警告標貼翹邊Warning label with flapping edge/lifting警告標貼脫落Warning label with peeling off警告標貼臟污 Warning label is dirty警示語/安全手冊

7、遺漏 Missing caution/warning/safety instruction產品合格證粘貼不良：產品合格證貼偏Certificate of conformity of product is slanting產品合格證有破損 Certificate of conformity is damaged產品缺少產品合格證Missing the certificate of conformity產品合格證翹邊Certificate of conformity with flapping edge/lifting產品合格證褶皺Certificate of conformity is fold

8、ed產品合格證脫落Certificate of conformity with peeling off產品合格證臟污 Certificate of conformity is dirty產品合格證上的制造商名稱與銘牌不一致Name of manufacturer on certificate of conformity does not accord withthe nameplate產品銘牌粘貼不良：產品銘牌貼紙有明顯氣泡There are obvious bubbles on the nameplate of product產品上有重復粘貼的銘牌There are repeated sti

9、ckup nameplates on the product銘牌缺失 Missing nameplate銘牌翹邊 Nameplate with flapping edge/lifting銘牌褶皺Nameplate is folded銘牌粘貼與指定位置有明顯偏差 Nameplate is slight out of the designated position銘牌顛倒 Nameplate is upside-down 銘牌臟污 Nameplate is dirty能效標簽粘貼不良：能效標簽缺失Missing the Energy Rating Label能效標簽破損/臟污/褶皺/翹邊/顛倒En

10、ergy Rating Label is damaged/dirty/folded/lifting/upside-down條形碼：條形碼信息與銘牌/說明書信息不符Bar code Scanned number is not conform to the number printed on the label/spec條形碼區域破損導致不可讀Broken or tear damage of the bar cord area occurs the un-reading印刷、噴油不良：噴油擦花 Paint with abrading印刷不清晰，不可讀 Un-clear printing could

11、 not be read 印刷臟污/褪色 Printing is smeared/off colored絲印不良：絲印刮花 Scratch on silk-screen絲印不清The silk-screen is not clear to read絲印內容有誤The content of silk-screen is wrong外部螺釘：螺絲生銹 Screw with rusting螺絲打花 Screw with stripping螺絲斷 Screw broken 螺釘翹起 Uneven screw covers螺孔刮花 Scratch on screw hole螺絲未鎖緊 Screw isn

12、t locked tightly 固定螺柱斷裂The bolt fixing the shell of product is broken漏裝一顆固定螺釘Miss a screw for fixing the shell 鉚釘未完全翻邊 The rivet isnt rolled properly and tightly 漏打特殊螺釘Missing the special screw產品表面：外殼/附件破碎 Enclosure or parts is broken產品裝配錯位 Assembly with dislocation產品微晶板錯位 The microcrystalline panel

13、 is dislocated產品表面變形 The surface of product deforms產品表面有凹痕，凹痕尺寸為* There is dent mark on the surface of product shell ， the mark is between * to * square cm/mm . 產品表面有刮花，劃痕尺寸為* There is scratched mark on the surface of product shell , the length is * cm/mm .產品表面有臟污，臟污點尺寸為* There is dirt mark on the s

14、urface of product shell , the spot is over * square cm/mm 產品表面有污垢，可擦掉的/不可擦掉的There is dirt on the surface of product shell, which is removable / irremovable 產品金屬表面生銹There is corrosion mark on metal surface of product產品表面有溢膠There is glue water mark on the surface of product產品微晶板側面崩缺The side face of mi

15、crocrystalline panel is collapsed微晶板破損Microcrystalline panel is broken產品微晶板溢膠There is uncleaned glue water mark in the gap of microcrystalline panel產品塑料部分（如手柄）成型不良There is peeling of chrome plating發熱盤涂層表面劃花There is scratch mark on the painting surface of heating plate產品內膽有污垢There is dirt mark on the

16、 internal bladder of product陶瓷表面有針眼There are pin holes on the surface of ceramic制陶不良，表面有凹線Ceramics is poor that there is concave line on the surface of product產品表面掉漆The painting on the surface of product peels off產品表面涂料不均勻The surface coating of product is uneven產品表面油漆涂層起浮點There are floating points o

17、n the surface of paint coating鍋柄焊接不良The handle of pot is poor welding產品塑料部分有披鋒/毛刺There is flashing/burrs mark on the plastic parts of product 產品手柄部分有銳邊Plastic part （handle）of product is poorly molded 產品焊接銳邊Welding- sharp edge of xproduct may cause injury 鍋蓋塑料部分有毛邊 The plastic part of pot cover has b

18、urrs水壺基座有毛刺There are burrs on the base of product產品底部螺絲有銳邊There are sharp edges of screws on the bottom of product產品結構缺陷：部件組裝不正確 Parts of the product have not been assembled correctly間隙問題：產品金屬件與塑料件間隙大于1.0 mmThe gap between metal and plastic parts is over 1.0 mm外殼裝配不到位，間隙達到2mmEnclosure is not secured

19、 in place or with excessive gaps 2.0 mm手柄間隙為0.76mmThe gap of handle is 0.76mm機頭外殼尺寸偏大，機頭外殼與機架耦合處突出0.81.3mmThe size of shell is so large to nose that the prominent coupling between the shell and the rack is 0.8-1.3mm產品面蓋與頂板配合間隙大于0.8mm The gap between the panel and the roof is greater than 0.8mm底部塑料與溫

20、控器配合間隙為0.8mmThe gap between the plastic part of bottom and thermostat is 0.8mm產品底部與壺身配合間隙為0.5mm The gap between bottom and body of product is 0.5mm安裝不到位、部件松脫：部件未裝緊或引起脫落Parts assembled are so loose that may cause drop off部件不定位 Parts assembled cannot hold position產品金屬外部鍍鉻層剝落There is sharp edge on the

21、handle of product虛焊、脫焊、焊穿或者焊接點過小可能影響使用功能Welding- false welding ， mesh welding loose ， welding through parts or welding joint is too minor which may affect function鎖緊裝置過松或者過緊The latch mechanism is too tight to operate or too loose to be locked 腳墊裝配過松導致脫落The rubber foot is too loose with falling off橡膠

22、墊松脫 Rubber feet looses out電水壺底座與壺體離拉/錯位For electric kettle，there is gap/step between base and bottom控制面板、開關：產品控制面板保護膜起皺Protective membrane covering onto Control Panel is folded按鍵卡住 Key/button is jammed/stuck按鍵太緊 Key/button is too tight when pressing開關不能復位Switch could not reset開關接觸不良 Power switch int

23、errupted保溫開關靈敏度低The sensitivity of insulation switch is poor控制面板上字體印刷不良 Poor printing on control panel控制面板刮花 Scratch on the control panel控制面板尺寸與規格書要求不符The height of control panel is different from the technical requirement, height of control panel is 120mm, and the technical requirement is 130.5mm控制

24、面板上的按鈕用2030N的力可以拔出The buttons on control panel would be pulled out with forces 20N膠腳、支架：支架傾斜超過要求The legs slant outwards/inwards more than requested 膠腳不平 Rocking on rubber foot漏裝膠腳 Missing rubber foot膠腳松脫Rubber foot looses附件、元件：漏裝附件 Missing components產品發熱元件與零部件清單上不一致The heating elements of product do

25、 not accord with Spare Parts list電源線型號沒有報備 Style of supply cord do not accord with submitted插頭生銹 Plug pins is rusted/oxidized電源線臟污 There is dirt mark on power supply cord電源線損壞，絕緣層/導線外漏Mains cable is damaged so as to 2nd insulation layer and/or conductors exposes電源線夾緊裝置松脫Clamping device for power cor

26、d looses火線外漏 Live wire exposed電源線可觸及 The power cord could be touched from the outside過濾網損壞 Damaged filter screen內膽刮花 Scratch on the internal bladder產品配件炒鍋中缺少手柄There is lack of handle to wok which belongs to the product accessories產品使用的電源線制造商為*，CB報告中沒有覆蓋。The power cord applied is manufactured by *, w

27、hich does not comply with the CB report.內部結構：產品內部線路混亂Internal connection wires disheveled產品內部電線護套有破損The sheathing material for internal wire is damaged產品內部臟污Dirty mark on the interior of the product內部金屬異物Metallic residue inside unit which can cause possible risk of electric shock產品內部有塑膠/金屬異物There is

28、 plastic/metal foreign body inside the product 產品內部接線端子處無電源中性線“N”及接地符號“”標識，不符合GB4706.1標準中的第7.8章要求There are no power neutral Nand grounding symbol , which do not comply to the requirements in the sections 7 and 8 of standard GB4706.1產品電源線中性線“N”標識粘貼位置錯誤，不符合標準GB4706.1要求The position Power neutral Nis po

29、sted on does not comply to the requirements of standard GB4706.1 產品內部關鍵元件無報備，如The critical components inside the product is not submitted in Parts List，such as相關測試：實驗設備無校準記錄 The equipment for testing is without calibration data at site .工廠無檢具，此項試驗無法進行The test is cancelled due to no suitable checking

30、 fixture in the factory .因工廠無儀器，能耗測試無法進行No instrument was supplied for power consumption check關鍵元器件對照 Critical Components Marking Comparison此項試驗不適用 The test does not apply 紙箱不能通過邊壓測試，耐破度不合格The board could not pass the Edgewise Crush Resistance test ，so its Mullen test is failure跌落測試后，包裝出現破洞、撕裂或者缺口，產

31、品明顯受損After Carton Drop test, the packaging appears holes, tears, or openings, 跌落測試后產品受損After Carton Drop test, the product is obviously damaged產品跌落測試后鍋柄斷裂Panhandle is broken after Carton Drop test彩盒跌落測試湯鍋手柄脫焊The handle of pot is sealing-off after Carton Drop test功能缺陷During the Functional check , the

32、re is something functional problems of the product功能指示器損壞 Function indicators is damaged指示燈不亮 Indicator lamp on switch could not lit up指示燈不亮、顏色暗淡或錯誤 Indicator light is inoperative, dimmed, or in wrong colors按鈕開關或產品功能間歇 Pushbutton switch or unit function is intermittent間歇無功能Intermittently non-functio

33、n風扇不工作 Fan can not rotate把手運作不順暢 The handle cant work well 條形碼讀取失敗 UPC can not be read/Bar Code Readability Check failed3M膠紙及耐磨實驗不合格3m glue tape test and Rubbing test for all screen printing failed手柄拉力測試不合格 pull test for handle failed插片與端子連接處只能承應*Kg的拉力The joint between the insert and the terminal connection could only bear電源線拉力測試不合格 Power cord strain relief check failed電源線彎折測試不合格 Bending test of connection wire failed 電流/功率不合規格 Current or wattage is out of specification安全測試：