BH1750數字光強度測試儀設計LCD1602顯示+51單片機C語言程序完整版(共8頁)

1、精選優質文檔-傾情為你奉上/*/ BH1750FVI IIC測試程序/ 使用單片機STC89C51 / 晶振：11.0592M/ 顯示：LCD1602/ 作者：dice szj QQ:/ 編譯環境 Keil uVision2/*#include <REG51.H>#include <math.h> /Keil library #include <stdio.h> /Keil library#include <INTRINS.H>#define uchar unsigned char#define uint unsigned int#define

2、DataPort P0 /LCD1602數據端口sbit SCL=P10; /IIC時鐘引腳定義sbit SDA=P11; /IIC數據引腳定義sbit LCM_RS=P24; /LCD1602命令端口sbit LCM_RW=P25; /LCD1602命令端口sbit LCM_EN=P26; /LCD1602命令端口 #define SlaveAddress 0x46 /定義器件在IIC總線中的從地址,根據ALT ADDRESS地址引腳不同修改 /ALT ADDRESS引腳接地時地址為0x46，接電源時地址為0xB8typedef unsigned char BYTE;typedef unsi

3、gned short WORD;BYTE BUF8; /接收數據緩存區 uchar ge,shi,bai,qian,wan; /顯示變量int dis_data; /變量void delay_nms(unsigned int k);void InitLcd();void Init_BH1750(void);void WriteDataLCM(uchar dataW);void WriteCommandLCM(uchar CMD,uchar Attribc);void DisplayOneChar(uchar X,uchar Y,uchar DData);void conversion(uint

4、 temp_data);void Single_Write_BH1750(uchar REG_Address); /單個寫入數據uchar Single_Read_BH1750(uchar REG_Address); /單個讀取內部寄存器數據void Multiple_Read_BH1750(); /連續的讀取內部寄存器數據/-void Delay5us();void Delay5ms();void BH1750_Start(); /起始信號void BH1750_Stop(); /停止信號void BH1750_SendACK(bit ack); /應答ACKbit BH1750_RecvA

5、CK(); /讀ackvoid BH1750_SendByte(BYTE dat); /IIC單個字節寫B(tài)YTE BH1750_RecvByte(); /IIC單個字節讀/-/*void conversion(uint temp_data) / 數據轉換出 個，十，百，千，萬 wan=temp_data/10000+0x30 ; temp_data=temp_data%10000; /取余運算qian=temp_data/1000+0x30 ; temp_data=temp_data%1000; /取余運算 bai=temp_data/100+0x30 ; temp_data=temp_dat

6、a%100; /取余運算 shi=temp_data/10+0x30 ; temp_data=temp_data%10; /取余運算 ge=temp_data+0x30; /毫秒延時*void delay_nms(unsigned int k)unsigned int i,j;for(i=0;i<k;i+)for(j=0;j<121;j+);/*/void WaitForEnable(void)DataPort=0xff;LCM_RS=0;LCM_RW=1;_nop_();LCM_EN=1;_nop_();_nop_();while(DataPort&0x80);LCM_E

7、N=0;/*/void WriteCommandLCM(uchar CMD,uchar Attribc)if(Attribc)WaitForEnable();LCM_RS=0;LCM_RW=0;_nop_();DataPort=CMD;_nop_();LCM_EN=1;_nop_();_nop_();LCM_EN=0;/*/void WriteDataLCM(uchar dataW)WaitForEnable();LCM_RS=1;LCM_RW=0;_nop_();DataPort=dataW;_nop_();LCM_EN=1;_nop_();_nop_();LCM_EN=0;/*/void

8、InitLcd()WriteCommandLCM(0x38,1);WriteCommandLCM(0x08,1);WriteCommandLCM(0x01,1);WriteCommandLCM(0x06,1);WriteCommandLCM(0x0c,1);/*/void DisplayOneChar(uchar X,uchar Y,uchar DData)Y&=1;X&=15;if(Y)X|=0x40;X|=0x80;WriteCommandLCM(X,0);WriteDataLCM(DData);/*延時5微秒(STC90C52RC12M)不同的工作環境,需要調整此函數，注

9、意時鐘過快時需要修改當改用1T的MCU時,請調整此延時函數*/void Delay5us() _nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();/*延時5毫秒(STC90C52RC12M)不同的工作環境,需要調整此函數當改用1T的MCU時,請調整此延時函數*/void Delay5ms() WORD n = 560; while (n-);/*起始信號*/void BH1750_Start

10、() SDA = 1; /拉高數據線 SCL = 1; /拉高時鐘線 Delay5us(); /延時 SDA = 0; /產生下降沿 Delay5us(); /延時 SCL = 0; /拉低時鐘線/*停止信號*/void BH1750_Stop() SDA = 0; /拉低數據線 SCL = 1; /拉高時鐘線 Delay5us(); /延時 SDA = 1; /產生上升沿 Delay5us(); /延時/*發送應答信號入口參數:ack (0:ACK 1:NAK)*/void BH1750_SendACK(bit ack) SDA = ack; /寫應答信號 SCL = 1; /拉高時鐘線 D

11、elay5us(); /延時 SCL = 0; /拉低時鐘線 Delay5us(); /延時/*接收應答信號*/bit BH1750_RecvACK() SCL = 1; /拉高時鐘線 Delay5us(); /延時 CY = SDA; /讀應答信號 SCL = 0; /拉低時鐘線 Delay5us(); /延時 return CY;/*向IIC總線發送一個字節數據*/void BH1750_SendByte(BYTE dat) BYTE i; for (i=0; i<8; i+) /8位計數器 dat <<= 1; /移出數據的最高位 SDA = CY; /送數據口 SCL

12、 = 1; /拉高時鐘線 Delay5us(); /延時 SCL = 0; /拉低時鐘線 Delay5us(); /延時 BH1750_RecvACK();/*從IIC總線接收一個字節數據*/BYTE BH1750_RecvByte() BYTE i; BYTE dat = 0; SDA = 1; /使能內部上拉,準備讀取數據, for (i=0; i<8; i+) /8位計數器 dat <<= 1; SCL = 1; /拉高時鐘線 Delay5us(); /延時 dat |= SDA; /讀數據 SCL = 0; /拉低時鐘線 Delay5us(); /延時 return

13、dat;/*void Single_Write_BH1750(uchar REG_Address) BH1750_Start(); /起始信號 BH1750_SendByte(SlaveAddress); /發送設備地址+寫信號 BH1750_SendByte(REG_Address); /內部寄存器地址， / BH1750_SendByte(REG_data); /內部寄存器數據， BH1750_Stop(); /發送停止信號/*單字節讀取*/*uchar Single_Read_BH1750(uchar REG_Address) uchar REG_data; BH1750_Start()

14、; /起始信號 BH1750_SendByte(SlaveAddress); /發送設備地址+寫信號 BH1750_SendByte(REG_Address); /發送存儲單元地址，從0開始 BH1750_Start(); /起始信號 BH1750_SendByte(SlaveAddress+1); /發送設備地址+讀信號 REG_data=BH1750_RecvByte(); /讀出寄存器數據BH1750_SendACK(1); BH1750_Stop(); /停止信號 return REG_data; */*/連續讀出BH1750內部數據/*void Multiple_read_BH175

15、0(void) uchar i; BH1750_Start(); /起始信號 BH1750_SendByte(SlaveAddress+1); /發送設備地址+讀信號 for (i=0; i<3; i+) /連續讀取2個地址數據，存儲中BUF BUFi = BH1750_RecvByte(); /BUF0存儲0x32地址中的數據 if (i = 3) BH1750_SendACK(1); /最后一個數據需要回NOACK else BH1750_SendACK(0); /回應ACK BH1750_Stop(); /停止信號 Delay5ms();/初始化BH1750，根據需要請參考pdf進

16、行修改*void Init_BH1750() Single_Write_BH1750(0x01); /*/主程序*/*void main() float temp; delay_nms(100); /延時100ms InitLcd(); /初始化LCD Init_BH1750(); /初始化BH1750 while(1) /循環 Single_Write_BH1750(0x01); / power on Single_Write_BH1750(0x10); / H- resolution mode delay_nms(180); /延時180ms Multiple_Read_BH1750(); /連續讀出數據，存儲在BUF中 dis_data=BUF0; dis_data=(dis_data<<8)+BUF1; /合成數據，即光照數據 temp=(float)dis_data/1.2; conversion(temp); /計算數據和顯示DisplayOneChar(0,0,'L'); DisplayOneChar(1,0,'i'); DisplayOneChar(2,0,'g'); DisplayOneChar(3,0,'h'); DisplayOneChar