制品納入仕樣書

1、UTE 21UTE 21 製品納入仕樣書製品納入仕樣書SpecificationSpecificationMIRAENANOTECH Co.,LtMIRAENANOTECH Co.,Ltd d. . 品品 名名Product NameProduct Name型型 名名ModelModelMIRAENANOTECHMIRAENANOTECHOptical filmOptical filmUTE 21UTE 21MIRAENANOTECH Co.,LtdMIRAENANOTECH Co.,Ltd. .Drawn ByDrawn ByChecked ByChecked ByApproved ByAp

2、proved ByUTE 21UTE 21 改改 訂訂 曆曆Revised RecordRevised RecordEditionEditionNo.No.改改 訂訂 內(nèi)內(nèi) 容容ContentsContents備備 考考NoteNote1 12006. 10.09 Modified reliability of environment itemsModified reliability of environment items2 23 32006. 9.21 EstablishedEstablishedUTE 21UTE 21 1. Scope This specification cover

3、s the quality requirements for MIRAENANOTECH Utility Film ( UTE II-21 )2. Function UTE21I has both functions of increasing brightness and diffusing light on the Back Light Unit of Liquid crystal displays. 3. Construction Base Layer : Polyester Film Layer Pattern Layer : Acryl Resin Layer4. Structure

4、 4-1. Product Structure Micro Lens Array Patterns of acrylic resin are formed randomly on one side of polyester film. 4-2. Section Structure Lens Pitch ()Acryl Resin LayerTotal Thickness ()Polyester Film LayePolyester Film Layer rPatternPatternHeight(Height() )PET PET Thickness Thickness ( () )UTE 2

5、1UTE 21 4.3 CharacteristicsItemItemDescriptionDescriptionUnitUnitValueValueTest MethodTest MethodUTE21UTE21-7-7GeneralGeneralTotal ThicknessDensityg/225 101.27 0.05ASTM D 1005ASTM D 1505OpticalOpticalTransmittanceHaze% (B F)% (B F) 55 580 5ASTM D 1003ASTM D 1003MechanicalMechanicalTensile StrengthEl

6、ongation(MD/TD) MPa(MD/TD) %123 / 178130 / 88ASTM D 882 ASTM D 882ElectricalElectricalSurface Resistivity (Pattern layer)/1013ASTM D 257(23C*50% RH)UTE21UTE21-7M-7MGeneralGeneralTotal ThicknessDensityg/230 101.27 0.05ASTM D 1005ASTM D 1505OpticalOpticalTransmittanceHaze% (B F)% (B F) 55 580 5ASTM D

7、1003ASTM D 1003MechanicalMechanicalTensile StrengthElongation(MD/TD) MPa(MD/TD) %123 / 178130 / 88ASTM D 882 ASTM D 882ElectricalElectricalSurface Resistivity (Pattern layer)/1013ASTM D 257(23C*50% RH) UTE21UTE21-10-10GeneralGeneralTotal ThicknessDensityg/280 101.27 0.05ASTM D 1005ASTM D 1505Optical

8、OpticalTransmittanceHaze% (B F)% (B F) 55 580 5ASTM D 1003ASTM D 1003MechanicalMechanicalTensile StrengthElongation(MD/TD) MPa(MD/TD) %160 / 300170 / 90ASTM D 882 ASTM D 882ElectricalElectricalSurface Resistivity (Pattern layer)/1013ASTM D 257(23C*50% RH)UTE 21UTE 21 5. Definition of the terms 5-1.

9、Structure terms - Lens Pitch : The distance of Micro Lens diameter - Pattern Height : Height of Micro Lens Pattern 5-2. Property terms - brightness rising rate: the rate of rising brightness with the use of sheet 5-3. Defect terms - defects: Foreign objects or deformation affecting product quality o

10、r properties, which exist in the product or on the surface. However, things that are not affecting product quality and can be easily removed with light air blow are not included, e.g., very small amount of dust on the surface. - black spot : An opaque spot which has chromatic color or different-colo

11、r spot. Spot average diameter is D. - white spot : A white or translucent spot. Spot average diameter is D. DbaD=(a+b)/2UTE 21UTE 21 No.ItemConditions1High temp. 80 , 240hr2Low temp. -30 , 240hr3High temp.& humidity 60, 75% RH, 240hr4Thermal shock (-20 x 1hr 70 x 1hr ) x 125times6. Reliability 6

12、-1. Test condition 6-2. Evaluation Items 7. Product warranty This Product should satisfy items belowItemConditionsExternal featureno serious change compared with the beginning state, with the naked eye.Brightness changeMaintain more than 80% of initial capacityColor changeChrominance about the initi

13、al value: E 4ItemsStandard requirementsThicknessFollow each models specificationAppearanceFor the using, there should be no defectsobstructing the products function. Detailed description is written in the attached external inspection standard requirements.ShapeFollow the obtained planUTE 21UTE 21 8.

14、Safety Policy We do not use hazardous materials as follows, 8-1. PBBs : Poly brominated bi-phenyls 8-2. PBBEs : Poly brominated bi-phenyls ether 8-3. Chrominum VI (Cr +6) 8-4. Cadmium (Cd) 8-5. Mercury (Hg) 8-6. Lead (Pb) 9. Warranty Policy If any trouble or defect in workmanship which the company i

15、s regarded liable for occurs, we agree to repair or replace the defective one without charge for six months from the date of supplies. 10. Notification of changes 10-1. In case of the situation that needs to change manufacture process, raw material, and specification, both sides should contact each

16、other and come to agreement beforehand. 10-2. Exchange the modified specification by mutual consent. 10-3. Deal with inventory of products manufactured before changes in the plan by mutual consent. 11. Storing 11-1. Avoid direct sunlight. Storing temperature: 1030, 60%RH 11-2. Keep on a level floor,

17、 and avoid dropping or shocks. 11-3. When load the products, handing carefully. 12. Issuer: MIRAENANOTECH CO., LTD. UTE 21UTE 21 Attachment #1 Appearance Inspection Above inspection rule dont include in the defectives from mis-handling Test Condition : Above size are the measurement after covering with LCD cell of customers. But if customer need to discuss about normal inspection rules nor apply more strongly rule in UTE21, both customer and MNTech will made the limit sample for reference in produce line and the agreement about mutual inspection rules.It