焊接材料質量管理規定

1、- 12/13. z. - - s-目錄Table of Contents TOC o 1-3 h z u HYPERLINK l _Toc326667950HYPERLINK l _Toc3266679511 *圍 PAGEREF _Toc326667951 h 6HYPERLINK l _Toc3266679521 Scope PAGEREF _Toc326667952 h 6HYPERLINK l _Toc3266679532 引用標準 PAGEREF _Toc326667953 h 6HYPERLINK l _Toc3266679542. Normative references PA

2、GEREF _Toc326667954 h 6HYPERLINK l _Toc3266679553 職責 PAGEREF _Toc326667955 h 8HYPERLINK l _Toc3266679563. Responsibilities PAGEREF _Toc326667956 h 8HYPERLINK l _Toc3266679574 采購 PAGEREF _Toc326667957 h 8HYPERLINK l _Toc3266679584. Purchase PAGEREF _Toc326667958 h 8HYPERLINK l _Toc3266679595 驗收 PAGER

3、EF _Toc326667959 h 9HYPERLINK l _Toc3266679605.1 驗收工程 PAGEREF _Toc326667960 h 9HYPERLINK l _Toc3266679615.1.1 包裝檢驗 PAGEREF _Toc326667961 h 9HYPERLINK l _Toc3266679625.1.2 質量證明書檢驗 PAGEREF _Toc326667962 h 9HYPERLINK l _Toc3266679635. Acceptance inspection PAGEREF _Toc326667963 h 9HYPERLINK l _Toc32666

4、79645.1 Inspection items PAGEREF _Toc326667964 h 9HYPERLINK l _Toc3266679655.1.1 Packing inspection PAGEREF _Toc326667965 h 9HYPERLINK l _Toc3266679665.1.2 Inspection of quality certificates PAGEREF _Toc326667966 h 9HYPERLINK l _Toc3266679675.1.3 外觀檢驗 PAGEREF _Toc326667967 h 9HYPERLINK l _Toc3266679

5、685.1.4 成分及性能試驗 PAGEREF _Toc326667968 h 10HYPERLINK l _Toc3266679695.2 檢驗結果的認可 PAGEREF _Toc326667969 h 10HYPERLINK l _Toc3266679705.3 驗收標記 PAGEREF _Toc326667970 h 10HYPERLINK l _Toc3266679715.1.3 E*terior inspection PAGEREF _Toc326667971 h 10HYPERLINK l _Toc3266679725.1.4 position and performance te

6、st PAGEREF _Toc326667972 h 10HYPERLINK l _Toc3266679735.2 Approval of inspection results PAGEREF _Toc326667973 h 10HYPERLINK l _Toc3266679745.3 Inspection mark PAGEREF _Toc326667974 h 10HYPERLINK l _Toc3266679756 入庫 PAGEREF _Toc326667975 h 10HYPERLINK l _Toc3266679766. Warehousing PAGEREF _Toc326667

7、976 h 11HYPERLINK l _Toc3266679777 庫存保管 PAGEREF _Toc326667977 h 11HYPERLINK l _Toc3266679787.1 存放條件 PAGEREF _Toc326667978 h 11HYPERLINK l _Toc3266679797. Storage PAGEREF _Toc326667979 h 11HYPERLINK l _Toc3266679807.1 Storage conditions PAGEREF _Toc326667980 h 11HYPERLINK l _Toc3266679817.2 庫存期間的檢查 P

8、AGEREF _Toc326667981 h 12HYPERLINK l _Toc3266679827.2 Inspection during storage PAGEREF _Toc326667982 h 12HYPERLINK l _Toc3266679838 出庫 PAGEREF _Toc326667983 h 12HYPERLINK l _Toc3266679848. Distribution PAGEREF _Toc326667984 h 12HYPERLINK l _Toc3266679859 使用過程中的管理 PAGEREF _Toc326667985 h 13HYPERLINK

9、 l _Toc3266679869.1 一般要求 PAGEREF _Toc326667986 h 13HYPERLINK l _Toc3266679879. Management during use PAGEREF _Toc326667987 h 14HYPERLINK l _Toc3266679889.1 General requirements PAGEREF _Toc326667988 h 14HYPERLINK l _Toc3266679899.2 烘干、保溫及清理 PAGEREF _Toc326667989 h 14HYPERLINK l _Toc3266679909.2 Dryi

10、ng, heat insulation and cleaning PAGEREF _Toc326667990 h 14HYPERLINK l _Toc3266679919.3 識別標志 PAGEREF _Toc326667991 h 15HYPERLINK l _Toc3266679929.4 焊接材料的回收 PAGEREF _Toc326667992 h 15HYPERLINK l _Toc3266679939.3 Identification mark PAGEREF _Toc326667993 h 15HYPERLINK l _Toc3266679949.4 Recovery of we

11、lding materials PAGEREF _Toc326667994 h 15HYPERLINK l _Toc3266679959.5 回收的焊接材料的烘干 PAGEREF _Toc326667995 h 16HYPERLINK l _Toc3266679969.6 焊劑的重復使用 PAGEREF _Toc326667996 h 16HYPERLINK l _Toc3266679979.5 Dry of recovery welding materials PAGEREF _Toc326667997 h 16HYPERLINK l _Toc3266679989.6 Repeated us

12、e of welding flu* PAGEREF _Toc326667998 h 16焊接材料質量管理規程Corporate Management Rules for Welding Material Quality Control1 *圍本標準規定了焊接材料,包括焊條、焊絲、焊劑、合金粉末、襯墊及焊接用氣體等，在采購、驗收、庫存保管及使用過程中的管理要求。為了保證焊接材料的使用性能，應具備必要的貯存、烘干、清理設施，建立可靠的管理規程并嚴格執行。本標準適用于焊接生產中，上述這些焊接材料的質量管理。1ScopeThis Standard specifies management requir

13、ements of welding materials (e.g., welding electrode, welding wire, welding flu*, alloy powder, backing and welding gas) during purchase, acceptance, warehousing and use. In order to ensure service performance of welding materials, necessary storage, drying and cleaning installations shall be made a

14、vailable, and reliable management specifications shall be established and strictly observed.This Standard applies to quality management of the said welding materials during welding operation.2 引用標準以下標準所包含的條文，通過在本標準中引用而構成為本標準的條文。標準出版時，所示版本均為有效。所有標準都會被修訂，使用本標準的各方應探討使用以下標準最新版本的可能性。GB/T5117-1995碳鋼焊條GB/T

15、5118-1995低合金焊條GB/T983-1995不銹鋼焊條GB/T984-2001堆焊焊條 2. Normative referencesThe following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard.At time of publication, the editions indicated were valid. All standards are subject to revision, and pa

16、rties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.GB/T5117-1995Carbon steel electrodesGB/T5118-1995Low alloy steel electrodesGB/T983-1995Stainless steel covered electrodesGB/T984-2001Hardfaci

17、ng electrodes for shielded metal arc weldingGB/T 1381492鎳及鎳合金焊條GB/T 156201995 鎳及鎳合金焊絲GB/T14957-1994熔化焊用鋼絲GB/T8110-1995氣體保護電弧焊用碳鋼、低合金鋼焊絲GB/T10045-2001碳鋼藥芯焊絲GB/T17493-1998低合金鋼藥芯焊絲GB 424285 焊接用不銹鋼絲GB/T5293-1999埋弧焊用碳鋼焊絲和焊劑GB/T 1381492 Nickel and nickel alloy covered welding electrodesGB/T 156201995 Nick

18、el and nickel alloy wires for welding rodsGB/T14957-1994 Steel wires for melt weldingGB/T8110-1995Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steelGB/T10045-2001 Carbon steel flu* cored electrodes for arc weldingGB/T17493-1998 Low alloy steel flu* cored electrod

19、es for arc weldingGB 424285 Stainless steel wires for weldingGB/T5293-1999 Carbon steel electrodes and flu*es for submerged arc weldingGB/T12470-2003低合金鋼埋弧焊用焊劑GB10433-2002電弧螺柱焊用園柱頭焊釘GB/T4842-2006純氬GB/T6052-1993工業用二氧化碳HG/T2537-1993焊接用二氧化碳 CCS 規* 材料焊接局部DNV 規* 材料焊接局部ABS 規* 材料焊接局部GL 規* 材料焊接局部BV 規* 材料焊接局

20、部LR 規* 材料焊接局部GB/T12470-2003 Low-alloy steel electrodes and flu*es for submerged arc weldingGB10433-2002Cheese head studs for arc stud weldingGB/T4842-2006 Pure argonGB/T6052-1993 mercial liquid carbon dio*ideHG/T2537-1993Carbon dio*ide for welding purposeCCS - Rules for materials and weldingDNV -Rul

21、es for materials and weldingABS - Rules for materials and weldingGL - Rules for materials and weldingBV - Rules for materials and weldingLR - Rules for materials and welding3 職責3.1 設計部根據各工程的特點和要求制定材料準備單。3.2 物資部根據材料準備單負責采購相關事宜，并且負責材料的入庫保管和出庫。3.3 質管部負責來料驗收和現場的使用監視。3.4 各生產使用部門負責焊材的領用、保管和發放回收事宜。3.5 對業主規

22、定有特殊要求的工程，要根據業主的規定要求修訂具體工程的管理規定，并監視執行。 3. Responsibilities3.1 Design Department shall make a material requisition based on the features and requirements of each project.3.2 Procurement Department is responsible for making purchases according to the material requisition and for warehousing materials

23、and sending materials out of warehouse.3.3 Quality Management Department is responsible for ining inspection and supervision over field use.3.4 Each production department is responsible for the requisition, custody, distribution and recovery of welding materials.3.5 For each project specially requir

24、ed by the Owner, the management rules for the project shall be made according to the Owners requirement and the implementation of such rules shall be supervised.4 采購4.1 焊接材料的采購人員應具備足夠的焊接材料根本知識，了解焊接材料在焊接生產中的用途及重要性。4.2 焊接材料的采購應依據訂貨技術條件，按擇優定點的原則，在合格供給商中選擇采購。在可能的條件下，盡量配套采購。4.3 特殊焊接材料，或有特殊技術要求的焊接材料，應按焊接主

25、管人員指定的供貨單位采購。4.4 焊接材料的采購，確保供貨方,生產企業已建立可靠的質量體系，具備可滿足我方生產需求的生產能力。4.5 焊接材料的供貨方應提供焊接材料的質量證明書(說明書)或合格標記，船級社證書，并保證其所提供的焊接材料產品符合有關標準或供貨協議的要求。4. Purchase4.1 Welding materials purchasing personnel shall have adequate basic knowledge on welding materials and learn about the purpose and significance of welding

26、 materials in welding operation.4.2 Welding materials shall be purchased from qualified suppliers who offer quality products with reasonable prices according to technical ordering specifications.4.3 Special welding materials or welding materials with special technical requirements shall be purchased

27、 from suppliers designated by welding supervisor.4.4 The supplier or manufacturer of welding materials shall have established a reliable quality system and enjoy the production capability of satisfying the panys demands.4.5 The supplier of welding materials shall present the quality certificate/spec

28、ifications or mark of conformity or classification certificate, and ensure that its welding materials and products conform to the requirements of relevant standards or supply agreement.5 驗收5.1 驗收工程焊接材料的驗收內容應依據焊接產品的制造規程、焊接產品的種類、船級社要求、業主技術條件要求及實際需要確定。5.1.1 包裝檢驗檢驗焊接材料的包裝是否符合有關標準要求，是否完好，有無破損、受潮現象。5.1.2

29、質量證明書檢驗對于附有質量證明書，船級社證書的焊接材料，核對其質量證明書，船級社證書所提供的數據是否齊全，并符合規定要求。5. Acceptance inspection5.1 Inspection itemsInspection items of welding materials shall be determined in accordance with manufacturing specifications and types of welding products, classification society rules, Owners technical conditions

30、and actual requirements.5.1.1 Packing inspectionCheck and make sure the package of welding materials meets the requirements of relevant standards, is sound, undamaged and not damped.5.1.2 Inspection of quality certificatesFor welding materials furnished with quality certificates or classification ce

31、rtificates, check and make sure the data as provided in such certificates are all plete and meet specified requirements.5.1.3 外觀檢驗檢驗焊接材料的外外表是否污染，在儲運過程中是否產生有可能影響焊接質量的缺陷，識別標志是否清晰、結實，與產品實物是否相符。5.1.4 成分及性能試驗如需要，應按技術要求進展焊接材料復驗，根據有關標準或供貨協議的要求，進展相應的試驗。5.2 檢驗結果的認可焊接材料的檢驗方法及檢驗規則一般應根據有關標準，船級社規*要求確定。必要時亦可由供需雙方

32、協商確定。焊接材料經歷收檢驗后應出具檢驗報告，并經有關職能部門認可。5.3 驗收標記驗收合格的焊接材料應在每個包裝上做專門的標記。5.1.3 E*terior inspectionCheck and make sure the e*terior of welding materials is uncontaminated, free of any defect that occurs during storage or transportation and is likely to affect welding quality, and that their identification ma

33、rks are clear and fast and consistent with actual conditions of the products.5.1.4 position and performance testIf necessary, welding inspection shall undergo re-inspection in accordance with technical requirements or corresponding tests as required in relevant standards or supply agreement.5.2 Appr

34、oval of inspection resultsThe methods and rules for inspection of welding materials shall be generally determined in accordance with the requirements of relevant standards and classification society rules. If necessary, such methods and rules may be determined through negotiation by the buyer and th

35、e seller.After acceptance inspection of welding materials, an inspection report shall be issued, subject to approval by relevant functional departments.5.3 Inspection markEach package of accepted welding materials shall be properly marked.6 入庫存放焊接材料的庫內可根據需要，劃分為“待檢、“合格及“不合格等區域，各區域要有明顯的標記。驗收合格的焊接材料應進展

36、入庫登記。其內容包括：a) 焊接材料的名稱、型號(或牌號)，或內部移植代號；b) 生產廠；c) 規格；d) 批號或爐號；e) 數量(或重量)；f) 生產日期；g) 入庫日期；h) 有效期(自驗收合格之日起至規定的期限)。焊接材料入庫后即應建立相應的庫存檔案，如入庫登記、質量證明書、船級社證書、驗收檢驗報告、檢查及發放記錄等。6. WarehousingThe warehouse where welding materials are stored will be divided into such zones as “inspection required, “accepted and “un

37、accepted with different and conspicuous marks.Accepted welding materials shall undergo warehousing registration, including:a) Name, model number (or designation) or internal transfer code of welding materials;b) Manufacturer;c) Specifications;d) Batch number or furnace number;e) Quantity (or weight)

38、;f) Date of production;g) Warehousing date;h) Effective period (from the date of acceptance to a specified date).After warehousing of welding materials, corresponding storage archives shall be established, including warehousing register, quality certification, classification certificate, acceptance

39、report, and inspection and distribution records.7 庫存保管7.1 存放條件7.1.1 焊接材料的儲存庫應保持適宜的溫度及濕度。室內溫度應在 5以上，相對濕度不超過 60%。室內應保持枯燥、清潔，不得存放有害介質。7.1.2 焊接材料應按有關的技術要求和平安規程妥善保管。因吸潮而可能導致失效的焊接材料，在存放時應采取必要的防潮措施，如設置貨架、采用防潮劑或去濕器等。品種、型號及牌號、批號、規格、入庫時間不同的焊接材料，應分類、分批存放，并有明確的區別標志，以免混雜。7. Storage7.1 Storage conditions7.1.1 The

40、 storeroom of welding materials shall always have suitable temperature and humidity.Indoor temperature shall be above 5 and relative humidity shall not e*ceed 60%. The storeroom shall be kept dry and clean inside and store no harmful agents.7.1.2 Welding materials shall be stored in accordance with

41、relevant technical requirements and safety regulations.Welding materials likely to fail due to dampness shall be provided with necessary moisture-proof measures, such as installation of storage rack or use of desiccant or dehumidifier.For fear of mi*ed storage, welding materials that differ in type,

42、 model number, designation, batch number, specifications and warehousing date shall be stored under different categories and in batches and have conspicuous identification marks.7.2 庫存期間的檢查庫存管理人員應具備有關焊接材料保存的根本知識，熟悉本崗位的各項管理程序和制度。定期對庫存的焊接材料進展檢查，并將檢查結果作書面記錄。發現由于保存不當而出現可能影響焊接質量的缺陷時，應及時報告質檢，和相關部門，會同有關職能部

43、門及時處理。7.2 Inspection during storageStorekeepers shall possess basic knowledge on storage of welding managers and familiarize themselves with all management procedures and systems for their respective posts.Check welding materials in stock periodically and record inspection results in writing.In case

44、 of any defect attributable to improper storage and likely to affect welding quality, it shall be timely reported to quality management and associated departments for timely disposal along with relevant functional departments.8出庫8.1 為了保證焊接材料在其有效期內得到使用，防止庫存超期所引起的不良后果，焊接材料的發放應按“先入先出的原則進展。8.2 焊接材料的出庫量應

45、嚴格按產品消耗定額控制，并以領料單為出庫憑據，經庫存管理人員核準之前方可發放。8. Distribution8.1 To ensure the use of welding materials within effective period and avoid bad consequence of e*piration of storage life, the distribution of welding materials shall follow the “FIFO (first in, first out) principle.8.2 The quantity of welding m

46、aterials taken out of warehouse shall be controlled in strict accordance with product consumption data, and warehousing materials may be sent out of warehouse only against the corresponding material requisition and with the approval by storekeeper.8.3 庫存超期的焊接材料庫存期超過規定期限的焊條、焊劑、焊絲及藥芯焊絲，需經有關職能部門復驗合格前方可

47、發放使用。復驗原則上以考核焊接材料是否產生可能影響焊接質量的缺陷為主，一般僅限于外觀及工藝性能試驗，但對焊接材料的使用性能有疑心時，可增加必要的檢驗工程。規定期限自生產日期始可按下述方法確定：a) 材料供給商的焊接材料質量證明書或說明書推薦的期限；b) 包裝密封良好的焊接材料為三年；c) 一般包裝的焊接材料，及其他焊接材料為二年。8.3 Welding materials with e*pired storage lifeWelding electrodes, flu*es, wires and flu* cored welding wires whose storage life e*pir

48、es may be distributed for use only after they pass re-inspection organized by relevant functional departments.Re-inspection is generally aimed at checking if any defect likely to affect welding quality occurs to welding materials, and is usually limited to e*terior inspection and process performance

49、 test. If there is any about service performance of welding materials, necessary inspection items may be included.The specified period is any of the following periods of time as from the date of production:a) Period as remended in quality certificate or specification of welding material supplier;b)T

50、he storage life of welding materials with good packing and sealing is three years;c) The storage life of welding materials with ordinary packing and other welding materials is two years.8.4 受潮、變質的焊接材料對于嚴重受潮、變質的焊接材料，應由質檢和有關職能部門進展必要的檢驗，并作出降級使用或報廢的處理決定之后，方可準許出庫。對于這類焊接材料的去向必須嚴格控制。8.4 Dampened, deteriora

51、ted welding materialsFor severely dampened or deteriorated welding materials, quality management and relevant functional departments shall make necessary inspection and decide on concession or scrapping before such materials may be taken out of warehouse. The flow direction of those materials must b

52、e strictly controlled.9 使用過程中的管理9.1 一般要求9.1.1 車間應設置專門的焊接材料管理員，負責焊接材料的焙烘、保管、發放及回收。9.1.2 使用管理職責車間的生產主管人員對焊接材料的管理及使用全面負責；焊接技術人員及車間檢查員應對焊接材料的管理及使用進展必要的檢查監視，確保焊接材料的正確使用，防止由于焊接材料管理不善而發生質量事故。9. Management during use9.1 General requirements9.1.1 The workshop shall have a welding materials management clerk w

53、ho is responsible for drying, custody, distribution and recovery of welding materials.9.1.2 Responsibility for use and managementProduction supervisor in the workshop assumes overall responsibility for management and use of welding materials;Welding technicians and workshop inspectors shall conduct

54、necessary inspection and supervision over the management and use of welding materials to ensure correct use of welding materials and prevent quality accident due to inappropriate management of welding materials.9.2烘干、保溫及清理9.2.1 烘干及清理焊接材料的場所應具備適宜的烘干、保溫設施，及清理手段。烘干、保溫設施應有可靠的溫度控制、時間控制及顯示裝置。儀器儀表應經過計量檢定。9

55、.2.2 焊接材料在烘干及保溫時應嚴格按有關技術要求執行。焊接材料在烘干時應排放合理、有利于均勻受熱及潮氣排除。堆高不超過70mm。烘干焊條時應注意防止焊條因驟冷驟熱而導致藥皮開裂或脫落。9.2.3 不同類型的焊接材料應分別烘干，防止混雜。9.2.4 焊接材料制造廠對有烘干要求的焊接材料，應提供明確的烘干條件。焊接材料的烘干規*可參照焊接材料說明書的要求確定。9.2 Drying, heat insulation and cleaning9.2.1 The site for drying and cleaning welding materials shall have adequate dr

56、ying and heat insulating facilities and cleaning methods. Drying and heat insulating installations shall have reliable temperature control, time control and indication devices. Instruments shall be measured and calibrated.9.2.2 Drying and heat insulation of welding materials shall be done in strict

57、accordance with relevant technical requirements.At the time of drying, welding materials shall be so reasonably placed to facilitate even heating and moisture elimination. The height of stack does not e*ceed 70mm.During the drying of welding electrodes, great care shall taken to prevent any crack in

58、 or shedding of electrode coating due to shock cooling and heating.9.2.3 Welding materials of different types shall be dried separately.9.2.4 If the manufacturer of a particular welding material has special drying requirements, it shall specify such requirements. Drying specifications for welding ma

59、terials may be determined according to product specifications of welding materials.9.2.5 烘干后的焊接材料應在規定的溫度*圍內保存，以備使用。9.2.6 焊接材料管理員對焊接材料的烘干、保溫、發放及回收應作詳細記錄，到達焊接材料使用的可追溯性。9.2.7 焊絲外表必須光滑、整潔，無油、銹及污物附著。9.2.8 真空包裝焊接材料采用真空包裝，按照焊接材料制造商技術規格書的規定，允許不進展焙烘的焊接材料，可直接使用，但必須在 4 小時內用完，或嚴格按照焊接材料制造商技術規格書的規定發放和使用。如果超過保存期，或發現真空包裝破損，制止使用。 After drying, welding materials shall be kept within a specified temperature range.9.2.6 Welding materials management clerk shall record in detail the drying, heat insulation, distribution and recovery of welding materials to ensure the traceability of welding materials usag