控制閥標準匯總

1、控制閥標準匯總標準編號標準中文名稱標準英文名稱GB/T13852-1992 船用液壓控制閥技術條件General specification of hydraulic control valves for shipGB/T17490-1998 液壓控制閥油口、底板、控制裝置和電磁鐵的標識Hydraulic fluid power-Identification of valve ports,subplates,control devices and solenoidsGB/T15623.1-2003 液壓傳動 電調制液壓控制閥 第1部分：四通方向流量控制閥試驗方法Hydraulic fluid

2、power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valvesGB/T15623.2-2003 液壓傳動 電調制液壓控制閥 第2部分：三通方向流量控制閥試驗方法Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valv

3、esGB/T17213.7-1998 工業過程控制閥第7部分: 控制閥數據單Industrial-process control valves Part 7: Control valve data sheetGB/T17213.8-1998 工業過程控制閥第8部分: 噪聲的考慮第1節: 實驗室內測量空氣動力流流徑控制閥產生的噪聲Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow

4、 through control valvesGB/T17213.1-1998 工業過程控制閥第1部分: 控制閥術語和總則Industrial-Process control valves Part 1: Control valve terminology and general considerationsGB/T17213.5-1998 工業過程控制閥第5部分: 標志Industrial-process control valves Part 5: MarkingGB/T2514-1993 四油口板式液壓方向控制閥安裝面Hydraulic fluid power-Four-port dir

5、ectional control valves-Mounting surfacesGB/T8104-1987 流量控制閥試驗方法Hydraulic fluid power-Valves-Testing method of flow control valvesGB/T7940.3-2001 氣動五氣口方向控制閥第三部分: 功能識別編碼體系Pneumatic fluid power-Five-port directional control valves-Part 3: Code system for communication of valve functionsGB/T8106-1987 方

6、向控制閥試驗方法Hydraulic fluid power-Valves-Testing method of directional control valvesGB/T7940.2-2001 氣動五氣口方向控制閥第二部分帶電氣接頭的安裝面Pneumatic fluid power-Five-port directional control valves-Part 2: Mounting interface surfaces with optional elettrical connectorGB/T8105-1987 壓力控制閥試驗方法Hydraulic fluid power-Valves

7、-Testing method of pressure control valvesGB/T7940.1-2001 氣動五氣口方向控制閥第一部分: 不帶電氣接頭的安裝面Pneumatic fluid power-Five-port directional control valves-Part 1: Mounting interface surfaces without electrical connectorGB/T8100-1987 板式聯接液壓壓力控制閥(不包括溢流閥)順序閥、卸荷閥、節流閥和單向閥安裝面Hydraulic fluid power-Pressure control val

8、ves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves-Mounting surfacesGB/T8098-2003 液壓傳動帶補償?shù)牧髁靠刂崎y安裝面Hydraulic fluid power-Compensated flow control valves-Mounting surfacesJB/T7387-1994(2005復審) 工業過程控制系統用電動控制閥NF C46-520-1993 工業過程控制閥.第8部分:噪聲問題.第2節

9、:通過控制閥的液壓流動產生的噪聲的實驗室測量(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)NF C46-522-1994 工業處理控制閥.第8部分:噪聲條款.第4節:液壓流動產生的噪聲預定(EN 534-8-4)(Industrial-process control valves. Part 8 : noise

10、considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)NF E49-080-1-2002 氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)NF E49-080-2-2002 氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面(

11、Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)NF C46-505-1998 絕緣過程控制閥.第2-3部分:流量容量.試驗過程(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)NF C46-630-1998 工業過程控制閥.第6部分:控制閥與定位器連接用安裝細節.第

12、1節:線性傳動裝置上安裝的定位器(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)NF E29-453-2000 工業過程控制閥門(Industrial process control valves.)標準編號標準中文名稱標準英文名稱NF E29-316-5-2001 供水用閥門.適用性要求和專用檢查試驗.第5部分:控制

13、閥門(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)NF C46-521-2001 工業過程控制閥.第8部分:噪聲問題.第3節:氣動控制閥噪聲預測法(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)NF E4

14、8-435-1998 液壓傳動.尺寸02、03和05的四端口模式排氣閥和四端口方向控制閥.夾緊尺寸(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)NF C46-519-2001 工業過程控制閥.第8部分:噪聲考慮.第1節:實驗室測量氣動流經控制閥產生的噪聲(Industrial-process control valves - Part 8 : noise consi

15、derations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)NF C46-531-2001 工業過程控制閥.第6-2部分:定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounti

16、ng on rotary actuators.)NF E49-091-2002 氣壓傳動.控制閥和其它部件的孔口和控制機械的驗證(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)XP E29-140-1999 使用氣體燃料的家用裝置的控制閥.安全控制閥(帶有集中自動密閉器的)(Control cocks for household appliances using gaseous fuels - Safety cocks

17、(with integrated automatic obturator).)NF C46-510-2001 工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, glob

18、e-type, a)NF C46-511-2001 工業過程控制閥.第3-2部分:尺寸.蝶閥除外的旋轉控制閥門的面對面尺寸(Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)NF E49-090-2-2003 氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面(Pneumatic fluid power - Five-port directional

19、control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)NF C46-512-1999 工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥(歐洲標準EN 60534-3-3)(Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, strai

20、ght pattern control valves.)ANSI/IEEE 1290-1996 核發電站電動控制閥門馬達應用、防護、控制和試驗指南(Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations)ANSI/FCI 87-2-1990 彈簧模板驅動控制閥動力信號標準(Power Signal Standard for Spring-Diaphragm Actuated Control Valve

21、s)ANSI/ISA 75.08.02-2003 無凸緣的控制閥端面間的尺寸(級別150、300和600) (Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) )ANSI/ISA S 75.08.03-2001 承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸(Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600

22、, 900, 1500, and 2500)ANSI/ISA 75.08.06-2002 帶凸緣的球型控制閥體的面對面尺寸(類型900、1500和2500) (Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) )ANSI/ISA 75.08.05-2002 端頭對焊球型控制閥的面對面尺寸(類型150、300、600、900、1500和2500) (Face-to-Face Dimensions for Buttweld-End Globe-Styl

23、e Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) )ANSI/ISA 75.01.01-2002 尺寸控制閥用流量方程式 (Flow Equations for Sizing Control Valves )ANSI/ISA 75.08.01-2002 整體式帶凸緣的球型控制閥體的面對面尺寸(類型125、150、250、300和600) (Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125,

24、150, 250, 300, and 600) )ANSI/ISA S 75.19.01-2001 控制閥的靜水試驗(Hydrostatic Testing of Control Valves)ANSI/ISA S 75.08.04-2001 對焊端頭球狀控制閥的面到面尺寸(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves)ANSI/ISA S 75.08.07-2001 獨立法蘭球狀控制閥的面到面尺寸(Face-to-Face Dimensions for Separable Flanged Globe-S

25、tyle Control Valves (Classes 150, 300, and 600)ANSI/(NFPA) T 3.5.14 R1-1997 液力傳動.直接控制閥門.分界特性的測定方法(Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics)ANSI/(NFPA) T 3.21.8-1990 氣壓液動.反應時間的測量.直接控制閥門(Pneumatic Fluid Power - Measurement of Response Time

26、 - Directional Control Valves)ANSI/ISA S 75.15-1993 對焊端球狀控制閥的面對面尺寸(ANSI等級150、300、600、900、1500、2500)(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)標準編號標準中文名稱標準英文名稱ANSI/FCI 91-1-1997 控制閥門密封的質量標準(Standard for Qualification of Contro

27、l Valve Stem Seals)ANSI/UL 753-1996 消防裝置用自動供水控制閥的警報附件(Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service)BS EN 60534-2-5-2003 工業過程控制閥.流通能力.通過有段間恢復功能的多段控制閥的流體流量的校準公式(Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multis

28、tage control valves with interstage recovery)ASTM F 1985-1999 氣力操作的球形控制閥標準規范(Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves)BS EN 60534-3-2-2001 工業過程控制閥.尺寸.蝶形閥除外的轉式控制閥的端面距(Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves ex

29、cept butterfly valves)BS ISO 15407-2-2003 氣壓傳動.五氣口方向控制閥,規格18mm和26mm.有任選電接頭的安裝接口(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector)BS ISO 12238-2001 氣壓液動.方向控制閥門.轉換時間的測量(Pneumatic fluid power - Direction

30、al control valves - Measurement of shifting time)BS ISO 5599-1-2001 氣壓液動.五通方向控制閥.不帶電連接器的安裝接口表面(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector)BS ISO 5599-2-2001 氣壓液動.五通方向控制閥.任選電氣連接器的安裝接口面(Pneumatic fluid power - Five-port direc

31、tional control valves - Mounting interface surfaces with optional electrical connector)BS EN 60534-6-2-2001 工業過程控制閥.定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators)BS EN 1074-5-

32、2001 供水閥門.適用性和專用要求的試驗.控制閥門(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves)BS EN 60534-8-3-2000 工業流程控制閥.噪聲問題.控制閥的空氣動力噪聲預報法(Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method)BS EN

33、 60534-2-3-1998 工業過程控制閥.流量.試驗程序(Industrial-process control valves - Flow capacity - Test procedures)BS EN 60534-8-1-2001 工業過程控制閥.噪聲問題.通過控制閥的動力噪聲的實驗室測量(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves)BS EN

34、 60534-3-1-2000 工業過程控制閥.尺寸.帶法蘭的兩路、球型、直立式控制閥門的面對面尺寸和帶法蘭的兩路、球型、角度控制閥門(Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter)BS EN 1349-2000 工業處理控制閥門(Indust

35、rial process control valves)BS ISO 15407-1-2000 18mm和26mm五氣口氣動方向控制閥.無電插頭的安裝界面(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector)BS ISO 11727-1999 氣動流體力學.控制閥和其它元件的控制機械裝置和氣門的識別(Pneumatic fluid power - Identifi

36、cation of ports and control mechanisms of control valves and other components)BS EN 60534-3-3-1998 工業過程控制閥.尺寸.對接焊接,兩向,球型,垂直模式控制閥的末端對末端尺寸(Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)BS EN 60534-2-1-1999 工業過程

37、控制閥 .流容.安裝條件下液流規模方程(Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions)BS ISO 6263-1997 液壓傳動.補償式流量控制閥.裝配面(Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)BS ISO 10770-2-1998 液壓傳動.電模式液壓控制閥.第2部分:三向流

38、動控制閥的試驗方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves)BS ISO 10770-1-1998 液壓傳動.電模式液壓控制閥.第1部分:四向流動控制閥的試驗方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way direc

39、tional flow control valves)BS EN 60534-6-1-1998 工業過程控制閥 .控制閥調節器連接用安裝元件.直線傳動裝置上調節器的安裝(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators)BS ISO 7790-1998 液壓傳動.規格為03和05型的四油口標準設計疊閥和四油口定向控制閥.緊固尺寸(Hydraulic fluid

40、power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)標準編號標準中文名稱標準英文名稱EN 60534-8-1-2000 工業過程控制閥第8部分：噪聲的考慮第1節：氣動流流徑控制閥產生的噪聲的實驗室測量Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of n

41、oise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)EN 60534-8-4-1994 工業過程控制閥第8部分：噪聲問題第4節：流動產生的噪聲的預測Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)EN 60534-8-3

42、-2000 工業流程控制閥.第8-3部分噪聲問題通過控制閥的動力噪聲預測法Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)EN 1074-5-2001 供水閥門 目的要求的適應性和合適的認證試驗 第5部分：控制閥門Valves for water supply - Fitness for purpose requirements and appropriate veri

43、fication tests - Part 5: Control valvesEN 60534-3-1-2000 工業過程控制閥第部分：尺寸法蘭雙通球形直型控制閥的端面間距尺寸和有法蘭雙通球型角型控制閥的Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type,

44、angle pattern control valves (IEC 60534-3-1:2000)EN 60534-2-1-1998 工業過程控制閥第21部分：流通能力安裝條件下流體流量的校準公式Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)EN 60534-1-1993 工業過程控制閥第1部分控制閥術語和一般考慮Industrial-process contr

45、ol valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)EN 60534-3-2-2001 工業過程控制閥第部分：尺寸第節：無法蘭控制閥（薄型蝶閥除外）的端面間距尺寸Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)E

46、N 60534-3-3-1998 工業過程控制閥第三部分：尺寸對接焊接兩向球型垂直模式控制閥的末端對末端尺寸Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)EN 60534-6-1-1997 工業過程控制閥第61部分：定位器聯到控制閥執行機構的安裝細則第1節：直線傳動裝置上調節器的安裝Industrial-pr

47、ocess control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)EN 60534-6-2-2001 工業過程控制閥第62部分：定位器聯到控制閥執行機構的安裝細則環形執行機構定位器Industrial-process control valves - Part 6-2: Mounting details for attachm

48、ent of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)EN 60534-8-2-1993 工業過程控制閥第8部分噪聲考慮第2節通過控制閥的流體產生的噪聲的實驗室測量報法Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through

49、 control valves (IEC 60534-8-2:1991)EN 60534-2-3-1998 工業過程控制閥第部分：流通能力第節：試驗規程Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)prEN 13959-2000 公稱壓力在DN6至DN250（含DN250）的防污染控制閥E族A、B、C和D型Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A

50、, B, C and DprEN 60534-4-1998 工業過程控制閥第部分：檢驗和常規試驗草案IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testingEN 1349-2000+AC-2001 工業加工控制閥門Industrial process control valvesEN 60534-2-5-2003 工業加工控制閥第2-5部分：流量 通過帶級間恢復多級控制閥的流體尺寸方程Industrial-process control valves - Part 2-5: F

51、low capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement noticeBS ISO 4401-1996 液壓傳動.四油口定向控制閥.裝配面(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)BS EN 60534-1-1989 工業過程控制閥 .第1部分

52、:控制閥術語和一般考慮(Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)BS EN 60534-8-4-1994 工業過程控制閥.第8部分:噪聲問題.第4節.流動產生的噪聲的預報(Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow

53、)BS EN 60534-8-2-1991 工業過程控制閥.第8部分:噪聲考慮.第2節:通過控制閥的流體產生的噪聲的實驗室測量(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)BS 6494-4-1989 液壓閥的安裝面.第4部分:03和05規格的四孔組件排氣閥、模數組閥和方向控制閥夾緊尺寸規范(Hydraulic fluid power valve mo

54、unting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves)BS 5793-4-1987 工業過程控制閥.第4部分:檢驗和例行試驗規范(Industrial-process control valves - Specification for inspection and routine testing)BS 5944-4-1984 液壓動力系統和部件所產生的空氣噪音的測量.第4部

55、分:流量和壓力控制閥聲功率級的測定方法(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)BS 5793-5-1984 工業過程控制閥.第5部分:標記規范(Industrial-process control valves - Specification for marking)標準編號標準中文名稱標準英文名稱BS 1

56、655-1950 過程控制工業用法蘭連接自動控制閥(面至面尺寸)規范(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)DIN EN 60534-2-3-1998 工業過程控制閥.第2-3部分:流量.檢驗方法(Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German versi

57、on EN 60534-2-3:1998)DIN EN 60534-6-1-1998 工業流程控制閥.第6部分:調節閥門驅動的位置調節器固定用安裝細節.第1節:行程驅動上位置調節器的安裝(Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997)DIN EN 60534-1-1995 工業過程控制閥.第1部分:控制閥術語和一般原理(Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987); German version EN 605