可調試數字電子時鐘電路的設計(吳丹)

1、杭州職業技術學院 畢業設計（作品） （2010屆）作品名稱 可調試數字電子時鐘電路的設計系 別 信 息 電 子 系 專 業 應用電子技術 班 級 應電0842 學 號 0803402038姓 名 吳 丹 指導教師 張雪娟 2010年5 月8 日一、作品原理圖 數字顯示時鐘的主要功能是用24進制顯示一天的時間，在單片機的輔助下能通過對時間進行調試，在斷電的情況下能準確的計時。電路如圖1所示。在實際電路中主要運用的是ds1320涓流充電時鐘芯片（u2）對時間進行24進制的計時，在通過atmega8l-8pi可編程8位控制器（u1）對在四位數碼顯示管上顯示出真確的時間，s1 ，s2 ，s3 是分別控

2、制時鐘調整時間的，在電路中還加入了一個蜂鳴器，當s1，s2 ，s3中的任何一個按下的時候就會發出聲音，這是對以后能更好檢查是哪個按鈕失靈的好方法。u1單片機的10-14的管腳分別于四位數碼顯示管上的abcdefg、dp相連，2345的管腳分別和四位數碼顯示管上的1234，這樣的連接就可以在四位數碼顯示管上真確的顯示數字0-9十個數字了，在u2集成塊上我們多加了一個電源vcc，在實際的電路中我們運用了一個3v的紐扣電池，在這種情況下即使單片機沒有通電，集成塊也能精確的記錄沒電時的時間，在下次通電的時候還是和現在的時間是一致的。圖1 電路原理圖二、程序設計在程序方面我們運用的是c語言的編程，在這個

3、編程里，我們分別實現了對24進制時間的調整，在正確顯示時鐘的同時還防止了時鐘錯誤顯示的功能。/ Define FPU and device defaults#include "config.h"#include <avr/io.h>#include <avrinterrupt.h>#include <util/delay.h>#include <avr/pgmspace.h>#include "LED47.h"#include "utils.h"#include "keys.h

4、"#include "DS1302.h"#include "buzzer.h"#define UPDATE_INTERVAL 60#define BLINKING_CRYCLE 3#define KEY_REPEAT_LIMIT_SET 1#define KEY_REPEAT_LIMIT_SHIFT 1#define KEY_REPEAT_LIMIT_UP 1#define ALARM_SECONDS 60#define ALARM_STOP 0#define ALARM_IN_ACTION 1int main (void)/byte Init

5、Val7=dec2bcd(00),dec2bcd(00),dec2bcd(17),dec2bcd(8),dec2bcd(3),dec2bcd(6),dec2bcd(9); /初始數 秒，分，時，日， 月，星期，年 byte ReadVal7=0x00,0x00,0x00,0x00,0x00,0x00,0x00;byte SaveSec, DispDot;word DispNum = 0;byte key;/ 0: initialized status/ 1: pressed in normal mode/ 2: released to enter setting mode/ 3: presse

6、d in setting modebyte SetStatus = 0;boolean AlarmSettingMode = false;byte ShiftStatus = 0, UpStatus = 0;byte TempDEC;byte SetCursor = 3;byte Blinking = 0;byte AlarmHour = 12, AlarmMin = 0;boolean AlarmFlag = false;byte AlarmStatus = ALARM_STOP;init_devices();/v_Set1302(InitVal);InitTube();InitKeys()

7、;/Disp4Digit( 8888, 1000, 3, 0);DispCircle( 2, 60, 1 );DispCircle( 2, 60, 0 );while( true ) / Sound on if alarm reached and alarm is activeif( AlarmFlag )if( (bcd2dec(ReadVal2) = AlarmHour) && (bcd2dec(ReadVal1)=AlarmMin) )/ Stop in odd secondif(bcd2dec(ReadVal0) % 2 )SoundOff();AlarmStatus

8、= ALARM_STOP;/ Sound in even secondelseSoundOn();AlarmStatus = ALARM_IN_ACTION;else if( AlarmStatus = ALARM_IN_ACTION) SoundOff();key = ReadKey();switch( key )/ SET pressedcase K_SET_PIN:/ Toggle pressed state/ Normal mode, pressedif( SetStatus = 0 ) SetStatus = 1;/ Setting mode, pressedelse if( Set

9、Status = 2 )Blinking = 0;SetStatus = 3;break;/ SET pressedcase K_SHIFT_PIN:if( ShiftStatus = 0 ) ShiftStatus = 1;break;case K_UP_PIN:/ Toggle pressed stateif( UpStatus = 0 ) UpStatus = 1;break;default: /- toggle setting and normal status/ Released to enter setting modeif(SetStatus = 1)SetStatus = 2;

10、SetCursor = 3;beep(10);/ Release to enter normal modeelse if(SetStatus = 3)if( !AlarmSettingMode )/ Set second to 0ReadVal0 = 0;/ Adjust the timev_Set1302(ReadVal);beep(20);/ Enter alarm modeAlarmSettingMode = true;/ Set SetStatus to alarm setting modeSetStatus = 1;SetCursor = 1;Blinking = 0;/ Toggl

11、e clock and alarm modeelse/ Enter normal modeAlarmSettingMode = false;SetStatus = 0;SetCursor = 0;Blinking = 0;/ Shift cursorif( ShiftStatus = 1)/ If in setting modeif( SetStatus = 2 ) SetCursor = SetCursor=0 ? 3: SetCursor-1;/ Disp current alarm settingelseDisp4Digit( AlarmHour * 100 + AlarmMin, 10

12、00, 0x03, 0, AlarmFlag);beep(10);/ Set shift key in normal statusShiftStatus = 0;/ Adjust numbersif( UpStatus = 1 )/ If in setting modeif( SetStatus = 2 ) / increse the dightswitch( SetCursor )/ Digit 0case 0:TempDEC = AlarmSettingMode ? AlarmMin : bcd2dec(ReadVal1);TempDEC+;if( TempDEC >= 60 ) T

13、empDEC = 0;if( AlarmSettingMode ) AlarmMin = TempDEC;else ReadVal1 = dec2bcd(TempDEC);break;/ Digit 1case 1:TempDEC = AlarmSettingMode ? AlarmMin : bcd2dec(ReadVal1);TempDEC+=10;if( TempDEC >= 60 ) TempDEC %= 10;if( AlarmSettingMode ) AlarmMin = TempDEC;else ReadVal1 = dec2bcd(TempDEC);break; / D

14、igit 2case 2:TempDEC = AlarmSettingMode ? AlarmHour : bcd2dec(ReadVal2);TempDEC+;if( TempDEC >= 24 ) TempDEC = 0;if( AlarmSettingMode ) AlarmHour = TempDEC;else ReadVal2 = dec2bcd(TempDEC);break;/ Digit 3case 3:TempDEC = AlarmSettingMode ? AlarmHour : bcd2dec(ReadVal2);TempDEC+=10;if( TempDEC >

15、;= 24 ) TempDEC %= 10;if( AlarmSettingMode ) AlarmHour = TempDEC;else ReadVal2 = dec2bcd(TempDEC);break; if( !AlarmSettingMode )/ Set second to 0ReadVal0 = 0;/ Adjust the timev_Set1302(ReadVal);/ Not in setting modeelse/ toggle alarmAlarmFlag = !AlarmFlag;if( AlarmFlag ) beep(20);else SoundOff();/ S

16、et up key to normal statusUpStatus = 0;break;SaveSec = ReadVal0;v_Get1302(ReadVal);if( SaveSec != ReadVal0 ) DispDot = 3;else DispDot = 0;if( !AlarmSettingMode )DispNum = bcd2dec(ReadVal2) * 100 + bcd2dec(ReadVal1);elseDispNum = AlarmHour * 100 + AlarmMin;if( SetStatus = 2 )Blinking+;if( Blinking &g

17、t;= BLINKING_CRYCLE ) Blinking = 0;if( AlarmSettingMode )Disp4Digit( DispNum, UPDATE_INTERVAL, 0x03, (Blinking = BLINKING_CRYCLE-1)?(1<<SetCursor):0, AlarmFlag);else Disp4Digit( DispNum, UPDATE_INTERVAL, DispDot, (Blinking = BLINKING_CRYCLE-1)?(1<<SetCursor):0, AlarmFlag);return(1);void

18、test1()/*DispDigit( 200 );DispHex( 200 );/DispLut( 200 );*/*while( true )for( int i=3; i>=0; i- )for( int j=0; j<10; j+ )DIGIT_PORT = (1<<i) DIGIT_MASK;SEG_PORT = segmentsj;_delay_ms(100);*/*while(1) for( int i=0; i<10000; i+ )Disp4Digit( i, 200, i%4 );*/三、作品展示圖2 作品圖四、作品元器件清單序號元器件符號元器件名稱參數數量1Z14位數碼顯示管SM42056412U1可編程8位控制器ATMEGA8L-8PI13U2涓流充電時鐘芯片DS130214R1,R2,R3電阻5.