CATIA曲面GSD詳細培訓學習教案

1、會計學1CATIA曲面曲面GSD詳細培訓詳細培訓第一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20022 1- Start menu 2- File / New menu 3- 快捷菜單快捷菜單workbenches 第1頁/共77頁第二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20023WireframeOperations第2頁/共77頁第三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20024SurfacesAnalysis第3頁/共7

2、7頁第四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20025BetweenBy coordinatesOn CurveOn surfaceNormal to surfaceTangent to curveBisecting創建參考點、線創建參考點、線 Aligned with reference direction Normal to reference direction Normal to circle 第4頁/共77頁第五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20026Normal

3、 to curveTangent to surfaceOffset from plane 第5頁/共77頁第六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20027 兩平面可平行也可不平行兩平面可平行也可不平行4 instances 第6頁/共77頁第七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20028 以存在的平面為參考以存在的平面為參考Origin 第7頁/共77頁第八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20029ElementE

4、xtremumIf the element is a surface, you may specify two others directions.只有一種方向限制只有一種方向限制兩種方向限制兩種方向限制第8頁/共77頁第九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200210最小半徑最小半徑最大半徑最大半徑最小角度最小角度最大最大角度角度第9頁/共77頁第十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200211最小半徑最小半徑最大半徑最大半徑最小角度最小角度最大角度最大角度第10頁/共77

5、頁第十一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200212Projected Elements Elements to project被投影元素可后創建，也可刪除和修改被投影元素可后創建，也可刪除和修改對多解的時候，保留最對多解的時候，保留最近的解近的解 第11頁/共77頁第十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200213 兩條曲線沿垂直或指定方向拉伸后，兩曲面的交線兩條曲線沿垂直或指定方向拉伸后，兩曲面的交線Resulting combined curveResulting

6、combined curveDirection 1Direction 2Curve1Curve2Direction 1Direction 2第12頁/共77頁第十三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200214反射線可把支撐面分成反射線可把支撐面分成兩部分兩部分Support曲面上法矢方向與指定方向成一定角度的點所構成的曲線曲面上法矢方向與指定方向成一定角度的點所構成的曲線第13頁/共77頁第十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200215Intersecting Elem

7、entElements to intersectIntersectionsType of created element :Or延伸求交延伸求交交集在第一交集在第一原素?cái)U(kuò)展原素?cái)U(kuò)展空間求交空間求交第14頁/共77頁第十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200216Reference curveSupportParallel CurveGeodesicEuclideanRoundSharp按規則平行按規則平行第15頁/共77頁第十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20021

8、7第16頁/共77頁第十七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200218Center and radiusCenter and pointTwo points and radiusThree pointsSupport在支撐面上創建在支撐面上創建 圓及圓弧圓及圓弧第17頁/共77頁第十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200219Element 1Element 2SupportElement 1Direction3D Corners可選擇可選擇頂點倒角頂點倒角第18頁/共

9、77頁第十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200220Connect CurveCurves to connect第19頁/共77頁第二十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200221Curves to connectBase CurvesBase Curve UsedConnect CurveBase Curve UsedConnect Curve第20頁/共77頁第二十一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 20

10、0222Parameter :- P=0.5 for parabola- P0.5 for hyperbolaIntermediate passing pointsTangents associated t o t h e t w o f i r s t passing points第21頁/共77頁第二十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200223第22頁/共77頁第二十三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200224 錐螺紋錐螺紋 用輪廓限制用輪廓限制螺距用規則限制螺

11、距用規則限制 普通螺紋普通螺紋第23頁/共77頁第二十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200225End angleStart radiusEnd radius第24頁/共77頁第二十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200226End radius 選擇一組平面選擇一組平面 選擇兩條引導線選擇兩條引導線第25頁/共77頁第二十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200227ProfileLimitsAxis

12、of revolutionProfile第26頁/共77頁第二十七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200228第27頁/共77頁第二十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200229 Repeat object after OK Reference surfaceSub-Elements to remove :第28頁/共77頁第二十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200230按規則定按規則定義角度義角度第29

13、頁/共77頁第三十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200231Length 1Length 2Guide curve 1Guide curve 2With reference surface With tangency surface:With draft direction With reference curve Select a guide curve, a reference Select a guide curve, a reference surface,surface, and key in an angle and

14、key in an angle value.The guiding curve must lie value.The guiding curve must lie completely on this reference completely on this reference surface, except if the latter is surface, except if the latter is a plane.a plane. Select a guide curve, and a Select a guide curve, and a reference surface to

15、which the reference surface to which the sweep is to be tangent.sweep is to be tangent. Select a guide curve, a Select a guide curve, a reference curve, and key in reference curve, and key in an angle value. an angle value. Select a guide curve and Select a guide curve and a draft direction (a a dra

16、ft direction (a line, a plane or line, a plane or components),components), 第30頁/共77頁第三十一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200232Length 1Length 2Guide curve 1Guide curve 2With two tangency With two tangency surfaces:surfaces:Limit and middle:Limit and middle:Two limits:Two limits:Select

17、two guide curves.Select the Limit and middle option from the list to use the second guide curve as middle curve.Select two guide curves.Select the Limit and middle option from the list to use the second guide curve as middle curve. Select a spine, and two tangency surfaces.Select a spine, and two ta

18、ngency surfaces.Select two guide curves. You can enter one or two length values to define the width of the swept surface.Select two guide curves. You can enter one or two length values to define the width of the swept surface. 第31頁/共77頁第三十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200233Guide c

19、urve 3Guide curve 1Guide curve 2Two guides and radius Center and two angles:Two guides and tangency surface Center and radius 第32頁/共77頁第三十三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200234Guide curve 3Guide curve 1Guide curve 2Three guides lines One guides and tangency surface Select a guide cur

20、ves, a reference surface to which the sweep is to be tangent, and enter a radius value.Select a guide curves, a reference surface to which the sweep is to be tangent, and enter a radius value. 第33頁/共77頁第三十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200235Five Guide Curves Three guides Four guide

21、s Five guidesTwo guides第34頁/共77頁第三十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200236You can also specify anchor points for each guide. These anchor points are You can also specify anchor points for each guide. These anchor points are intersection points between the guides and the profiles plane

22、 or the profile intersection points between the guides and the profiles plane or the profile itself, through which the guiding curves will pass.itself, through which the guiding curves will pass. Two points: select anchor points on the profile which will be matched Two points: select anchor points o

23、n the profile which will be matched respectively to Guide Curve 1 and 2.If the profile is open, these points respectively to Guide Curve 1 and 2.If the profile is open, these points are optional and the extremities of the profile are used. are optional and the extremities of the profile are used. Po

24、int and direction: select an anchor point on the profile which will be matched onto Guide Point and direction: select an anchor point on the profile which will be matched onto Guide Curve 1 and an anchor direction.In each sweeping plane, the default x-axis (which corresponds Curve 1 and an anchor di

25、rection.In each sweeping plane, the default x-axis (which corresponds to the given oriented direction) is aligned with the two guide curves, from Guide Curve 1 to to the given oriented direction) is aligned with the two guide curves, from Guide Curve 1 to Guide Curve 2.Guide Curve 2. If the profile

26、is manually positioned defining anchor points will position If the profile is manually positioned defining anchor points will position the profile between the guides, matching the anchor points with guide the profile between the guides, matching the anchor points with guide intersection points, prio

27、r to performing the sweeping operation. intersection points, prior to performing the sweeping operation. 定位點可以控制羅廓線的位置和形狀（即按比例縮放），表明輪廓上哪個點和引導線定位點可以控制羅廓線的位置和形狀（即按比例縮放），表明輪廓上哪個點和引導線相對應（當輪廓和引導線不相交時，且輪廓是封閉的）相對應（當輪廓和引導線不相交時，且輪廓是封閉的）在輪廓起始點處的在輪廓起始點處的spinespine的垂直面與草繪平面的相交線通過輪廓的兩個端點時，不用設置定位點，的垂直面與草繪平面的相交線通過

28、輪廓的兩個端點時，不用設置定位點，否則需要設置定位點或手動定位輪廓線否則需要設置定位點或手動定位輪廓線第35頁/共77頁第三十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200237With reference surface:With reference surface:Select a guide curve, a reference surface,Select a guide curve, a reference surface, and key in an and key in an angle value.angle value.

29、The guiding curve must lie completely on this reference The guiding curve must lie completely on this reference surface, except if the latter is a plane.surface, except if the latter is a plane.第36頁/共77頁第三十七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200238Guiding CurveSketch designed in contextS

30、ketch 精度精度 斷面線的參數約束斷面線的參數約束第37頁/共77頁第三十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200239Boundary1Passing PointBoundary2Boundary3Boundary4Support of 2nd boundarySupport of 4th boundary 與支撐面的連續性與支撐面的連續性第38頁/共77頁第三十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200240Tangent SupportSection1Sectio

31、n2Section3Section4Tangent SupportResulting Lofted surface 重新設置封閉點重新設置封閉點曲面在引導線方向曲面在引導線方向的限制范圍的限制范圍 利用引導線控制利用引導線控制第39頁/共77頁第四十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200241斷面曲線參數對應性斷面曲線參數對應性Ratio Tangency Tangency then curvature Vertices 第40頁/共77頁第四十一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTE

32、MES 200242Manual coupling between sections過渡面與支撐面的邊界端過渡面與支撐面的邊界端點施加切失連續約束點施加切失連續約束定 義 過 渡 面 的 張 量定 義 過 渡 面 的 張 量 , ,常 量常 量(Constant)(Constant)或線性或線性(Linear)(Linear)第41頁/共77頁第四十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200243You will select a propagation type to create exactly the necessary por

33、tion of curve.Complete boundaryTangent continuityNo propagationPoint continuity第42頁/共77頁第四十三頁，編輯于星期五：二十二點 三十九分。選擇原來沒有被選中的對象選擇原來沒有被選中的對象提取的元素會被組成幾組元素提取的元素會被組成幾組元素Point continuityTangent continuityNo propagation第43頁/共77頁第四十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200245刪除部分提取草圖元素刪除部分提取草圖元素第44頁/

34、共77頁第四十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200246Element 1Element 2間距或角度小于該值可以合并，否間距或角度小于該值可以合并，否則不能合并則不能合并減少合并數量減少合并數量忽略不能合并的幾何體忽略不能合并的幾何體第45頁/共77頁第四十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200247重新組織要合并的與素：重新組織要合并的與素： 無外衍無外衍 全部全部 點連續外衍點連續外衍 切失連續外衍切失連續外衍第46頁/共77頁第四十七頁，編輯于星期五：二十二

35、點 三十九分。Copyright DASSAULT SYSTEMES 200248Gap to healGap healedThe result is a single feature :設置修補的間距和角度，設置修補的間距和角度，小于該值可以修補，否則小于該值可以修補，否則不能不能設定元素不受該操作影設定元素不受該操作影響響第47頁/共77頁第四十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200249Tangency corrected, curvature corrected連續限定值連續限定值, ,光順小于限光順小于限定值的不連續區域

36、定值的不連續區域減少曲線段數減少曲線段數顯示箭頭顯示箭頭分步顯示分步顯示顯示沒有改變的不連顯示沒有改變的不連續信息續信息第48頁/共77頁第四十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200250第49頁/共77頁第五十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200251Domains onlyDomains only保持點連續保持點連續第50頁/共77頁第五十一頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200252C u t t i

37、 n g elementsElement to cutElement 1Element 2第51頁/共77頁第五十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200253Splitting and trimming wire on support :Element to trimCutting elementUsing a supportSupportOnly the selected element is removed.Only the selected element is removed.All other elements are

38、kept.All other elements are kept. The selected elements are kept.The selected elements are kept.All other elements are removed.All other elements are removed. 創建交線創建交線第52頁/共77頁第五十三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200254SmoothStraightMaximumMinimumHold CurveSpine CurveThe fillet will be

39、 The fillet will be created between two created between two surfacessurfaces第53頁/共77頁第五十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200255TriTangent:TriTangent:The fillet will be created between three The fillet will be created between three surfaces. It involves the removal of surfaces. It invo

40、lves the removal of one of the three faces selected. one of the three faces selected. 1.1.Select a surface as theSelect a surface as the first support first support element. element. 2.2.Select another surface as the second support Select another surface as the second support element. element. 3.3.S

41、elect the surface to be removed. Select the surface to be removed. The fillet will be tangent to this The fillet will be tangent to this face.face. 第54頁/共77頁第五十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200256Limiting element :Note : the limiting element has to completely intersect the fillet.N

42、ote : Edges must be internal edges.第55頁/共77頁第五十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200257Circle Radius Fillet using a SpineSpineCircle FilletLimiting element第56頁/共77頁第五十七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200258The Tri-Tangent Fillet is a variable radius Fillet tangent to all

43、 three faces selected. 第57頁/共77頁第五十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200259 Six transformation types are available:TranslationRotationSymmetryScaling等比例等比例Affinity變比例變比例Axis to Axis 第58頁/共77頁第五十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200260Surface boundary無外衍無外衍點連續外衍點連續外衍切失連續外衍

44、切失連續外衍選擇內部邊界選擇內部邊界第59頁/共77頁第六十頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200261 You can create near elements from any entity that is not connex.Near element created for one entity of the surface.Near element created for one entity of the sketch.保留所有元素保留所有元素第60頁/共77頁第六十一頁，編輯于星期五：二十二點 三十九分。Copyrig

45、ht DASSAULT SYSTEMES 200262曲面設定方向后，進行偏移等操作即按此方曲面設定方向后，進行偏移等操作即按此方向進行向進行第61頁/共77頁第六十二頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200263Reference elementSurface to patternAs in the Part Design workbench, you can create circular and rectangular patterns of wireframe or surfaces elements.Element to p

46、atternReference element第62頁/共77頁第六十三頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200264ReferenceDefinitionYou can visualize the Start and End points of the Law.參考直線與定義曲線的公共區域參考直線與定義曲線的公共區域應用公式定義規則應用公式定義規則Reuse these laws in Parallel curves or classic sweeps creation.Parallel curve using the law第63

47、頁/共77頁第六十四頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200265Distance AnalysisTangency AnalysisCurvature Analysis第64頁/共77頁第六十五頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200266Distance AnalysisTangency AnalysisCurvature AnalysisOverlapping Display of the maximum discontinuity values on the curv

48、e. 第65頁/共77頁第六十六頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200267同同 part design 首先首先Using the “On the fly analysis” you can check the draft angle in each point of the shape.羅盤在曲面上羅盤在曲面上,Z,Z軸方向設置到拔模方向軸方向設置到拔模方向上上第66頁/共77頁第六十七頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200268The Blue area indic

49、ates the curvature orientation change首先首先第67頁/共77頁第六十八頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200269This tool can be applied on :-A curve.-A surface (boundaries analysis).第68頁/共77頁第六十九頁，編輯于星期五：二十二點 三十九分。Copyright DASSAULT SYSTEMES 200270Surface to Solid ToolsSolid to Surface ToolsAccess from within the Part Design WorkbenchCreate a surface offset from a solid faceCreate a Fill Surface from solid edgesJOIN solid edges into section curves then LOFT between these section curvesCreate a Blend Surface between two solid facesExtract a surface from a solid