5000萬噸二硫化碳尾氣系統及冷凝器設計中文摘要

1、年產 5000 萬噸二硫化碳尾氣系統及冷凝器設計摘要：本次設計介紹了二硫化碳尾氣處理系統的工藝設計。它包括總工藝流程設計，冷凝器的設計及校核，計量罐的設計及校核。冷凝器的設計是本次設計的重點。根據實際情況最終確定選用應用最為廣泛的間壁式換熱設備為此次所需冷凝器。它的設計步驟為先進行傳熱計算，然后進行冷凝器的尺寸計算，最后進行強度計算和校核。設計前的熱力計算是本次設計的難點與重點。由于冷凝的介質中含有不凝性氣體，所以加大了熱力學傳熱計算這部分的計算難度。冷凝器的設計包括冷凝器上的筒體、封頭、管箱、管板、換熱管、折流板、拉桿、接管、開孔補強、支座、法蘭等的設計、計算與核算。計量罐的設計包括筒體、封

2、頭、接管、開口補強、液面計及支座的設計和校核，是本次設計的一個重要組成部分。：總工藝流程；冷凝器；計量罐An annual output of 50 million tons of carbon disulfide exhaust systems and condenser designAbstract： roduction to the Design of the exhaust gas treatment system of the carbon disulfidePros Design. It includes the total flow structural design, the

3、condenser design and verification,measurement can design and verification.Condenser is designed to be the focus of this design. According to the actual situation todetermine the final selection of the most widely used heat exchanger equipment partitions requiredfor the condenser. It is designed to c

4、arry out the steps for theheat transfer calculation, thenthe size of the condenser, the final calculation and check for strength. Design before the thermalcalculation is difficult in this design and focus. As a result of condensation of the mediumcontaining non-condensable gas, it increased the heat

5、 transfer calculation of the thermodynamiccalculation of the difficulty of this part. Condenser design includes the cylinder, head, controlboxes, control panels, heat exchanger, baffle, bar, take over, opening reinforcement, bearing,flange, such as design, computing and accounting.measurement can de

6、sign includes cylinder, head, take over, opening reinforcement, and thebearing surface of the design and verification, is an important design component.Key words: total flow; condenser; measurement can目錄言前11二硫化碳尾氣處理系統工藝設計1.1 國內外二硫化碳生產概況 221.2 工藝流程設計32冷凝器的設計2.1 冷凝器的結構選型 442.2 冷凝器設計的各種參數的計算 43計量罐的設計 3.1 筒體設計4