基于51單片機和ADC0809數模轉換的C程序

#include#include #define uchar unsigned char #define uint unsigned int/*定義LCD1602接口信息*/sbit lcdrs=P30;/數據命令選擇位sbit lcden=P31;/使能位sbit lcdrw=P32;/*定義ADC0808接口信息*/sbit ADA=P20; sbit ADB=P21; sbit ADC=P22; sbit EOC=P23; sbit CLK=P24; sbit START=P25; sbit OE=P26;/*鍵盤管腳定義*/sbit key1=P33; sbit key2=P37;/*定義數據*/uchar tab1=48,46,48,48,48,46,48,48,48,46,48,48,48,46,48,48; /存放AD采集數據uchar tab2=48,46,48,48,48,46,48,48,48,46,48,48,48,46,48,48; uchar tab3=TONGLU:; uchar tab4=DIANYA:; uchar tab5=;uchar num,m=0,getdata=0; uint temp=0;/*延時函數*/ void delay(uchar t) uchar x,y; for(x=t;x0;x-) for(y=110;y0;y-); void delayl(uchar ltime) uchar i; for(i=ltime;i0;i-) delay(255); /*寫命令函數*/void write_com(uchar com) lcdrs=0; P0=com; delay(10); lcden=1; delay(10); lcden=0; /*寫數據函數*/ void write_data(uchar date) lcdrs=1; P0=date; delay(10); lcden=1; delay(10); lcden=0; void disp(uchar h,l,uchar *p) write_com(0x80+h*0x40+l); while(*p!=0) write_data(*p); p+; /*初始化函數*/void LcdInit() lcdrw=0; delay(5); lcden=0;/使能位置低電平 write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80); delayl(20); void TimeInit() TMOD=0x10;/定時器1工作于方式1,16位不重裝初值 TH1=(65536-200)/256; /定時200us(5KHz) TL1=(65536-200)%256; EA=1; ET1=1; TR1=1; void AdTr(bit ADDA,ADDB,ADDC,uchar channel) START=0; OE=0; START=1; START=0;/A/D轉換啟動信號，正脈沖啟動選中的模擬信號開始轉換 ADA=ADDA; ADB=ADDB; ADC=ADDC; delay(5); while(EOC=0);/啟動轉換后EOC變?yōu)長,轉換結束后變?yōu)镠 OE=1; getdata=P1; temp=getdata*1.0/255*500;OE=0; if(channel=4) channel=channel-4; tab24*channel=temp/100+0x30; tab24*channel+2=(temp%100)/10+0x30; tab24*channel+3=(temp%100)%10+0x30; void keyscan()/* 按鍵2進行減1*/ uint k; if(key1=0) m-; if(m5) write_com(0x80+0x07); write_data(tab5m-1); write_com(0x80+0x47); for(k=0;k=5&m9) write_com(0x80+0x07); write_data(tab5m-1); write_com(0x80+0x47); for(k=0;k4;k+)write_data(tab24*(m-5)+k); if(m=1)m=1; while(key1=0); /等待按鍵釋放 if(key2=0) m+; if(m5) write_com(0x80+0x07); write_data(tab5m-1); write_com(0x80+0x47); for(k=0;k=5&m9) write_com(0x80+0x07); write_data(tab5m-1); write_com(0x80+0x47); for(k=0;k4;k+) write_data(tab24*(m-5)+k); if(m=9)m=0; while(key2=0); /等待按鍵釋放 void main() LcdInit(); TimeInit(); while(1) AdTr(0,0,0,0); delay(5); AdTr(0,0,1,1); delay(5); AdTr(0,1,0,2); delay(5); AdTr(0,1,1,3); delay(5); AdTr(1,0,0,4); delay(5); AdTr(1,0,1,5); delay(5); AdTr(1,1,0,6); delay(5); AdTr(1,1,1,7); delay(5); disp(