版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、六自由度并聯機器人基于grassmann-cayley代數的奇異性條件patricia ben-horin和moshe shoham,會員,ieee摘要本文研究了奇異性條件大多數的六自由度并聯機器人在每一個腿上都有一個球形接頭。首先,確定致動器螺絲在腿鏈中心。然后用凱萊代數和相關的分解方法用于確定哪些條件的導數(或剛度矩陣)包含這些螺絲是等級不足。這些工具是有利的,因為他們方便操縱坐標-簡單的表達式表示的幾何實體,從而使幾何解釋的奇異性條件是更容易獲得。使用這些工具,奇異性條件(至少)144種這類的組合被劃定在四個平面所相交的一個點上。這四個平面定義為這個零距螺絲球形關節的位置和方向。指數te
2、rms-grassmann-cayley代數,奇點,三條腿的機器。1、 介紹在過去的二十年里,許多研究人員廣泛研究并聯機器人的奇異性。不像串聯機器人,失去在奇異配置中的自由度,盡管并聯機器人的執行器都是鎖著但是他們的的自由度還是可以獲得的。因此,這些不穩定姿勢的全面知識為提高機器人的設計和確定機器人的路徑規劃是至關重要的。主要的方法之一,用于尋找奇異性并行機器人是基于計算雅可比行列式進行的。gosselin和安杰利斯1分類奇異性的閉環機制通過考慮兩個雅克比定義輸入速度和輸出速度之間的關系。當圣魯克和gosselin2減少了算術操作要求定義的雅可比行列式高夫斯圖爾特平臺(gsp),從而使數值計算
3、得到多項式。另一個重要的工具,為分析螺旋理論中的奇異性,首先闡述了1900的論文6和開發機器人應用程序。幾項研究已經應用這個理論找到并聯機器人的奇異性,例如,11-14。特別注意到情況,執行機構是線性和代表螺絲是零投的。在這些情況下,奇異的配置是解決通過使用幾何,尋找可能的致動器線依賴15-17。其他分類方法閉環機制可以被發現在18-22。在本文中,我們分析了奇異點的一大類三條腿的機器人,在每個腿鏈有一個球形接頭上的任何點。我們只關注了正運動學奇異性。首先,我們發現螺絲相關執行機構的每個鏈。因為每一個鏈包含一個球形接頭,自致動器螺絲是相互聯合的,他們是通過球形關節的零螺距螺桿螺絲。然后我們使用
4、grassmann-cayley代數和相關的發展獲得一個代數方程,它源于管理行機器人包含的剛度矩陣。直接和高效檢索的幾何意義的奇異配置是最主要的一個優點,在這里將介紹其方法。雖然之前的研究53分析7架構普惠制,各有至少三條并發關節,本文擴展了奇點分析程度更廣泛的一類機器人有三條腿和一個球形關節。使用降低行列式和grassmann-cayley運營商我們獲得一個通用的條件,這些機器人的奇異性提供在一個簡單的幾何意義方式計算中。本文的結構如下。第二節詳細描述了運動學結構的并聯機器人。第三節包含一個簡短的在螺絲和大綱性質的背景下驅動器螺絲,零距螺絲作用于中心的球形關節。第四部分包含一個介紹grass
5、mann-cayley代數的基本工具用于尋找奇異性條件。這部分還包括剛度矩陣(或?qū)?shù))分解成坐標自由表達。第五節中一個常見的例子給出了這種方法。最后,第六章比較了使用本方法結果與結果的其他技術。2、 運動構架本文闡述了6自由度并聯機器人有六間連通性基礎和移動平臺。肖海姆和羅斯54提供了調查可能的結構,產生基于流動公式6自由度的grubler和kutzbach。他們尋找了所有的可能性,滿足這個公式對關節的數目和任何鏈接。gsp和三條腿的機器人結構的一個子集所列出的6自由度shoham和羅斯。一個類似的例子也證實了了podhorodeski和pittens55,他發現了一個類的三條腿的對稱并聯機器
6、人,球形關節、轉動關節的平臺在每個腿比其他結構潛在有利。正如上面所討論的,大多數的報告文獻限制他們的分析結構和球形關節位于移動平臺和棱柱關節作為驅動的關節。在這個分類,我們包括五種類型的關節和更多的可選職位的球形關節。我們處理機器人有三個鏈連接到移動平臺,每個驅動有兩個1自由度關節或一個二自由度關節。這些鏈不一定是平等的,但都有移動和連接六個基地和之間的平臺。除了球形接頭(s),關節考慮是棱鏡(p),轉動(r)、螺旋(h)、圓柱(c)和通用(u),前三個是1自由度關節和最后兩個二自由度的關節。所有的可能性都顯示在表i和ii。該列表只包含機器人,有平等的連鎖,總計144種不同的結構,但是機器人與
7、任何可能的組合鏈也可以被認為是membersof這類方法。組合的總數,大于500 000,計算方式如下:3、 管理方法本節涉及螺絲和平臺運動的確定。因為考慮機器人有三個串行鏈,每個驅動器螺絲的方向可以由其互惠到其他關節螺釘固定在鏈條。被動球形接頭在每個鏈部隊驅動器螺絲為零距(行)并且通過它的中心。因此,三個平面是創建中心位于自己的球形關節。以下簡要介紹了螺旋理論,廣泛的解決7,73,75;我們解決在第二節中列出相互的所有關節螺釘系統。上述類的機器人的幾何結果奇點現在相比其他方法獲得的結果要準確。首先,我們比較奇異條件在上述3 gsp平臺與結果報告線幾何方法。 根據相對幾何條件的他行方法區分不同
8、的幾種類型沿著棱鏡致動器81的奇異性。我們表明,所有這些奇異點是特定情況下的條件通過(17 c)提供,這是有效的三條腿以及6:3 gsp平臺的機器人的考慮。這種結構的奇異的配置根據線幾何分析包括五種類型:3 c、4 b、4 d,5 a和5 b17,36。4、 奇異性分析 本節確定奇異性條件定義在第二節的機器人。第一部分包括尋找方向的執行機構的行動路線,基于解釋第三節中介紹。他行通過球形接頭中心,而他們的方向取決于關節的分布和位置。第二部分包括應用程序的方法使用了grassmann-cayley代數在第四節定義奇點。因為每對線滿足在一個點(球形接頭),所有例子的解決方案是象征性地平等,無論點位置
9、的腿或腿的對稱性。我們從文獻中舉例說明使用三個機器人的解決方案。1.方向的致動器螺絲第一個例子是3-prps機器人提出behi61見圖3(a)。對于每個腿驅動螺絲躺在這家由球形接頭中心和轉動關節軸。特別是,致動器螺桿是垂直于軸的,和致動器螺桿是垂直于軸的,這些方向被描繪在圖3(b)。第二個例子是the3-usr機器人提出simaan et al。66見圖4(a)。每條腿有驅動器螺絲躺在通過球形接頭中心和包含轉動關節軸中。驅動器螺絲穿過球形接頭中心并與轉動關節軸相連。這些方向被描繪在圖4(b)。第三個例子是3-ppsp byun建造的機器人和65見圖5(一個)。每條腿,驅動螺絲躺在飛機通過球形接
10、頭中心和正常的棱鏡接頭軸。驅動器螺絲垂直于軸的,和致動器螺桿是垂直于軸的,這些方向被描繪在圖5(b)。圖3 (a)3-prps機器人提出behi61 (b)飛機和致動器螺絲圖4 (a)3自由度機器人提出simaan和shoham66(b)飛機和致動器螺絲的3自由度機器人圖5 (a)3-ppsp機器人提出byun65(b)飛機和致動器螺絲2、 .奇異性條件雅克(或superbracket)的機器人是分解成普通支架monomials使用麥克米蘭的分解,即(16)。解釋部分3b機器人,本文認為每個鏈有兩個零距驅動器螺絲通過球形接頭。拓撲,這個描述等于行6:3 gsp(或在53),這三條線,每經過一個
11、雙球面上的接頭平臺(見圖6)。這意味著每對線共享一個公共點(這些點在圖6中)。因此類的機器人被認為是在本文中,我們可以使用相同的標記點的至于6:3 gsp。六線與相關各機器人通過雙點,并且,用同樣的方式在圖6。圖6 6 - 3 gsp5、 結果 本文提出一個廣義奇異性分析并聯機器人組成元素。這些是有一個球形接頭在每個腿鏈的三條腿的6自由度機器人。因為球形關節需要驅動器,螺絲是純粹的力量作用于他們的中心,他們的位置沿鏈是不重要的。組成元素包括144機制不同類型的關節,每個都有不同的聯合裝置沿鏈。提出并建立描述幾個機器人出現在列表中。大量的機器人相關的分析組合不同被認為是。奇點的分析是由第一個找到
12、的執行機構使用互惠的螺絲。然后,借助組合方法和grassmann-cayley方法,得到剛度矩陣行列式在一個可以操作的協調自由形式,可以翻譯成一個簡單的幾何條件之后。其定義是幾何條件由執行機構位置的線條和球形接頭,至少有一個相交點。這個有效的奇異點條件考慮所有組成元素中的機器人。一個比較的結果與結果的奇點證明了其他技術所有先前描述奇異條件實際上是特殊情況下的幾何條件的四架飛機交叉在一個點,一個條件獲取的方法直接在這里提出。singularity condition of six-degree-of-freedomthree-legged parallel robots based ongras
13、smanncayley algebrapatricia ben-horin and moshe shoham, associate member, ieeeabstractthis paper addresses the singularity condition of a broad class of six-degree-of-freedom three-legged parallel robots that have one spherical joint somewhere along each leg. first, the actuator screws for each leg-
14、chain are determined. then grassmanncayley algebra and the associated superbracket decomposition are used to find the condition for which the jacobian (or rigidity matrix) containing these screws is rank-deficient. these tools are advantageous since they facilitate manipulation of coordinate-free ex
15、pressions representing geometric entities, thus enabling the geometrical interpretation of the singularity condition to be obtained more easily. using these tools, the singularity condition of (at least) 144 combinations of this class is delineated to be the intersection of four planes at one point.
16、 these four planes are defined by the locations of the spherical joints and the directions of the zero-pitch screws. index termsgrassmanncayley algebra, singularity, three-legged robots.i. introduction during the last two decades, many researchers have extensively investigated singularities of paral
17、lel robots. unlike serial robots that lose degrees of freedom (dofs) in singular configurations, parallel robots might also gain dofs even though their actuators are locked. therefore, thorough knowledge of these unstable poses is essential for improving robot design and determining robot path plann
18、ing.one of the principal methods used for finding the singularities of parallel robots is based on calculation of the jacobian determinant degeneracy. gosselin and angeles 1 classified the singularities of closed-loop mechanisms by considering two jacobians that define the relationship between input
19、 and output velocities. st-onge and gosselin 2 reduced the arithmetical operations required to define the jacobian determinant for the goughstewart platform (gsp), and thus enabled numerical calculation of the obtained polynomial in real-time. zlatanov et al. 35 expanded the classification proposed
20、by gosselin and angeles to define six types of singularity that are derived using equations containing not only the input and output velocities but also explicit passive joint velocities. another important tool that has served in the analysis of singularities is the screw theory, first expounded in
21、balls 1900 treatise 6 and developed for robotic applications by hunt 79 and sugimoto et al. 10. several studies have applied this theory to find singularities of parallel robots, for example, 1114. special attention was paid to cases in which the actuators are linear and the representing screws are
22、zero-pitched. in these cases, the singular configurations were solved by using line geometry, looking for possible actuator-line dependencies 1517. other approaches taken to classify singularities of closed-loop mechanisms can be found in 1822.in this paper, we analyze the singularities of a broad c
23、lass of three-legged robots, having a spherical joint at any point in each individual leg-chain. we focus only on forward kinematics singularities. first, we find the screws associated with the actuators of each chain. since every chain contains a spherical joint, and since the actuator screws are r
24、eciprocal to the joint screws, they are zero-pitch screws passing through the spherical joints. then we use grassmanncayley algebra and related developments to get an algebraic equation which originates from the rigidity matrix containing the governing lines of the robot. the direct and efficient re
25、trieval of the geometric meaning of the singular configurations is one of the main advantages of the method presented here.while the previous study 53 analyzed only seven architectures of gsp, each having at least three pairs of concurrent joints, this paper expands the singularity analysis to a con
26、siderably broader class of robots that have three legs with a spherical joints somewhere along the legs. using the reduced determinant and grassmanncayley operators we obtain one single generic condition for which these robots are singular and provide in a simple manner the geometric meaning of this
27、 condition.the structure of this paper is as follows. section ii describes in detail the kinematic architecture of the class of parallel robots under consideration. section iii contains a brief background on screws and outlines the nature of the actuator screws, which are zero-pitch screws acting on
28、 the centers of the spherical joints. section iv contains an introduction to grassmanncayley algebra which is the basic tool used for finding the singularity condition. this section also includes the rigidity matrix (or jacobian) decomposition into coordinate-free expressions. in section v a general
29、 example of this approach is given. finally, section vi compares the results obtained using the present method with results obtained by other techniques.ii. kinematic architecture待添加的隱藏文字內容1this paper deals with 6-dof parallel robots that have connectivity six between the base and the moving platfor
30、m. shoham and roth 54 provided a survey of the possible structures that yield 6-dof based on the mobility formula of grbler and kutzbach. they searched for all the possibilities that satisfy this formula with respect to the number of joints connected to any of the links. the gsp and three-legged rob
31、ots are a subset of the structures with 6-dof listed by shoham and roth. a similar enumeration was provided also by podhorodeski and pittens 55, who found a class of three-legged symmetric parallel robots that have spherical joints at the platform and revolute joints in each leg to be potentially ad
32、vantageous over other structures. as discussed above, most of the reports in the literature limit their analysis to structures with spherical joints located on the moving platform and revolute or prismatic joints as actuated or passive additional joints. exceptions are the family of 14 robots propos
33、ed by simaan and shoham 28 which contain spherical-revolute dyads connected to the platform, and some structures mentioned below which have revolute or prismatic joints on the platform. in this classification, we include five types of joints and more optional positions for the spherical joints.we de
34、al with robots that have three chains connected to the moving platform, each actuated by two 1-dof joints or one 2-dof joint. these chains are not necessarily equal, but all have mobility and connectivity six between the base and the platform. besides the spherical joint (s), the joints taken into c
35、onsideration are prismatic (p), revolute (r), helical (h), cylindrical (c), and universal (u), the first three being 1-dof joints and the last two being 2-dof joints. all the possibilities are shown in tables i and ii. the list contains only the robots that have equal chains, totaling 144 different
36、structures, but robots with any possible combination of chains can also be considered as membersof this class. the total number of combinations, , is larger than 500 000, calculated as follows:iii. governing linesthis section deals with the screws that determine the platform motion. since the robots
37、 under consideration have three serial chains, the direction of each actuator screw can be determined by its reciprocity to the other joint screws in the chain. the passive spherical joint in each chain forces the actuator screws to have zero-pitch (lines) and to pass through its center. therefore,
38、three flat pencils are created having their centers located at the spherical joints. following a brief introduction to the screw theory that is extensively treated in 7, 7375; we address the reciprocal screw systems of all the joints listed in section ii. the geometric result for the singularity of
39、the aforementioned class of robots is now compared with the results obtained by other approaches in the literature. first, we compare the singularity condition described above for the 6-3 gsp platform with the results reported for the line geometry method. the line geometry method distinguishes amon
40、g several types of singularities, according to the relative geometric condition of he lines along the prismatic actuators 81. we show that all these singularities are particular cases of the condition providedby (17c), which is valid for the three-legged robots under consideration as well as for the
41、 6-3 gsp platform. the singular configurations of this structure according to line geometry analysis include five types: 3c, 4b, 4d, 5a, and 5b 17, 36.iv. singularity analysisthis section determines the singularity condition for the class of robots defined in section ii. the first part consists of f
42、inding the direction of the actuator lines of action, based on the explanation introduced in section iii. the lines pass through the spherical joint center while their directions depend on the distribution and position of the joints. the second part includes application of the approach using grassma
43、nncayley algebra presented in section iv for defining singularity when considering six lines attaching two platforms. since every pair of lines meet at one point (the spherical joint), the solution for all the cases is symbolically equal, regardless of the points location in the leg or the symmetry
44、of the legs. we exemplify the solution using three robots from the literature.a. direction of the actuator screwsthe first example is the 3-prps robot as proposed by behi 61 see fig. 3(a). for each leg the actuated screws lie on theplane defined by the spherical joint center and the revolute joint a
45、xis. in particular,the actuator screw is perpendicular to the axis of , and the actuator screw is perpendicular to the axis of , these directions being depicted in fig. 3(b).the second example is the3-usr robot as proposed by simaan et al.66see fig.4(a).every leg has the actuator screws lying on the
46、 plane passing through the spherical joint center and containing the revolute joint axis. the actuator screw passes through the spherical joint center and intersects the revolute joint axis and. similarly, the actuator screw passes through the spherical joint center and intersects the revolute joint
47、 axis and , these directions being depicted in fig. 4(b).the third example is the 3-ppsp robot built by byun and cho 65 see fig. 5(a). for every leg the actuated screws lie on the plane passing through the spherical joint center and being normal to the prismatic joint axis.the actuator screw is perp
48、endicular to the axis of , and the actuator screw is perpendicular to the axis of , these directions being depicted in fig. 5(b).fig. 3. (a) the 3-prps robot as proposed by behi 61. (b) planes and actuator screws.fig. 4. (a) the 3-usr robot as proposed by simaan and shoham 66. (b) planes and actuato
49、r screws of the 3-usr robot. fig. 5. (a) 3-ppsp robot as proposed by byun and cho 65. (b) planes and actuator screws.b. singularity condition the jacobian (or superbracket) of a robot is decomposed into ordinary bracket monomials using mcmillans decomposition, namely (16). as explained in section ii
50、i-b, all the robots of the class considered in this paper have two zero-pitch actuator screws passing through the spherical joint of each chain. topologically, this description is equivalent to the lines of the 6-3 gsp (or in 53), which has three pairs of lines, each passing through a double spheric
51、al joint on the platform (see fig. 6). this means that each pair of lines share one common point (in fig. 6 these points are , , and ). therefore for the class of robots considered in this paper, we can use the same notation of points as for the 6-3 gsp. the six lines associated with each robot pass through the pairs of points,and , in the same way as in fig. 6. due to t
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 金融科技下知識產權融資的實踐與探索
- 個人住房抵押貸款合同
- 中外雙方進出口合同范本
- 二手房全款交易合同范本
- 個人租賃倉儲空間的合同范本
- 中外合作研發合同范本(人工智能)
- 專業技術人才培養合作合同
- 產業投資合作協議合同模板
- 主要農作物新品種推廣合同示范文本
- 個人與合作方倉儲運輸合同例文
- 測繪工程產品價格表匯編
- 拘留所教育課件02
- 語言和語言學課件
- 《工作場所安全使用化學品規定》
- 裝飾圖案設計-裝飾圖案的形式課件
- 2022年菏澤醫學??茖W(xué)校單招綜合素質考試筆試試題及答案解析
- 護理學基礎教案導尿術catheterization
- ICU護理工作流程
- 廣東版高中信息技術教案(全套)
- 市政工程設施養護維修估算指標
- 分布式光伏屋頂調查表
評論
0/150
提交評論