思科網控器WLC基本配置

1、無線網絡拓撲圖Cisco-WLC 4402無線控制器配置示例：啟動Cisco WLC后必須使用Windows中自帶軟件“超級終端”并通過console電纜登陸WLC進行配置。隨后根據系統提示完成以下配置：System Name Cisco_40:4a:03: Enter Administrative User Name (24 characters max): ciscoEnter Administrative Password (24 characters max): ciscoService Interface IP Address Configuration noneDHCP:none

2、=這里選擇不使用DHCP服務來分配服務端口的IP地址獲得方式。我們將手工進行配置。Management Interface IP Address: Management Interface Netmask: Management Interface Default Router:Management Interface VLAN Identifier (0 = untagged): 10AP Manager Interface IP Address: AP-Manager is on Management subnet, using same valuesAP Manager Interfac

3、e DHCP Server : =指向核心交換機，由核心交換機負責DHCP服務功能。AP Transport Mode Layer2 Layer3: Layer3 =選擇使用三層傳輸模式Virtual Gateway IP Address: .1 Mobility/RF Group Name: mobile-P Network Name (SSID): secure-P =Wlan的名稱Allow Static IP Addresses YESno: yes =允許手工配置IP地址Configure a RADIUS Server now? YESno: no =不配置R

4、adius ServerEnter the RADIUS Server's Address: Enter the RADIUS Server's Port 1812: Enter the RADIUS Server's Secret: Enter Country Code (enter 'help' for a list of countries) US: CNFinally, the corresponding AP Radio types must be configured on the AP , as shown in Example 9 bel

5、ow. In this lab, we will be using 802.11b radios with transmit power set to 1mw in order to minimize RF interference within the lab.Enable 802.11b Network YESno: yesEnable Network YESno: yesEnable Network YESno: yesEnable Auto-RF YESno: yes當配置完畢后WLC會自動保存配置并從新啟動。(Controller) >show interface summar

6、yInterface Name Port Vlan Id IP Address Type Ap Mgr- - - - ap-manager LAG untagged .10.11 Static Yes management LAG untagged .10.10 Static No service-port N/A N/A .Static No virtual N/A N/A .1 Static No (Controller) > ping Send count=3, Receive count=3 from 當配置service port以后就可以通過WEB瀏覽器配置WLC了。通過地址

7、欄 https:/management IP addressUser：ciscoPassword：ciscoMonitor 頁面中的摘要信息，可以看到AP的數量和傳輸所使用的帶寬狀態，AP的管理地址以及WLC的名字。Controller頁面中的接口地址和關于VLAN和WLAN的地址。Wireless頁面中WLC所注冊的AP，已經這個AP的名字和MAC地址。Controller頁面中針對DHCP服務的配置，也可以將DHCP服務地址指向核心交換機。Controller頁面中關于VLAN接口的配置Security頁面中針對二層網絡安全的AAA（授權、認證、統計）服務配置Wlans頁面中針對無線局域網選擇安全方式配置Radius Server的地址核心交換機配置示例：Switch(config)#ip dhcp pool APSwitch(dhcp-config)#dns-server 連接AP的POE接口配置示例：Switch(config)#interface f0/1Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10Switch(config-if)#spanning-tree portfast與WLC相連的交換機端口配置示例