自動收線機構設計資料

1、自動收線機構設計資料(Data of cordr eel)一 收線基本原 理1. 自動收線原理；2. 用 途 ；3. 適用的電源線。二收線機構的主要方式1. 內 部 幾 構 介 紹2. 排 線 方 式 比 較3. 鎖定 及收線機 構4. 限 速 機 構三.U L規格電源線的自動收線機構1. 電源線規格2. 安規要求3. 有關專利4. 空間要求四 . JQA 規 格 電 源 線 的 自 動 收 線 機 構1. 電 源線 規格2. 安規要求3. 有關專利4. 空間要求五. 其 他收 線方 式一. 收 線 基本原 理1. 自動收線原理：自動收線機構是利用平面渦旋簧的儲能、釋能及棘輪機 構的單向鎖定進

2、 行收放線。將電源線拉出時，平面渦旋簧儲能，停止拉 出時，轉軸在渦旋簧作用下迴轉至被棘輪機構鎖定，電源線停止動作；收 線 時 利 用 按 鈕或 其他方式 ， 打 開鎖 定 機 構 ， 使平 面 渦 旋 簧 的 儲 能釋 放 ， 帶 動 轉 軸 將電 源線 纏繞收 回 。 矚慫潤厲釤瘞睞 櫪廡賴。2. 用途：自動收線機構應用在熨斗和其它家電產品上的主要目的，是在使 用 完畢 後， 將電 源 線 收 納 起來 ， 便于存放 。 聞創溝燴鐺險愛氌譴凈。適用的電源線：3. 自 動收 線機 構 的 電 源 線主 要 為兩線 (不 帶地 線 ) 的 橡膠 線 ， 目 前 有日 本市 場 JQA 規 格 的

3、 電 源線 及美 國市場 UL 規 格的 電源 線 ，歐洲市場 TUV 規 格的 棉紗線 由于 受卷 線 空間及 表層 抗摩強度的 限 制， 目 前尚未 有自 動收 線 的 應 用 。 殘騖樓 諍錈瀨濟溆塹籟。二. 收線 機 構 的 主 要方 式1. 內部機構介紹：下 面 以 7301 為 例闡述自 動 收 線裝 置的 內部 機構首 先由後蓋和 中 介蓋 板組成收 線的 空間 及 中介蓋 板提 供收 線 的 旋 轉軸。在旋轉軸的前端安裝有大、小滑電環。此兩個滑電環的作用是將電源 線與熨斗的內配線連通。在旋轉軸上有可以旋轉的前、後卷線筒。在前後卷線筒之間有電源線。 前後卷線筒靠三顆螺釘鎖附在一起

4、，同時將電源線壓緊。電源線的兩極分 別與固定在前卷線筒上的大、小彈片點焊在一起。大小彈片的端頭部各有 兩銀觸點與其點焊在一起。大小彈片可以與前卷線筒一起圍繞著旋轉軸轉 動。大小彈片通過銀觸點在大小滑電環上滑動，從而使電源線與熨斗的內 配線導通。銀觸點起的作用是減少磨損，保證良好的接觸，防止電路導通 時在大小彈片與大小滑電環之間有弧光放電，確保大小彈片不會與大小滑 電環因少許的弧光放電就粘焊在一起。為了進一步減輕銀觸點的磨損，在 銀觸點與大小滑電環之間涂有節點油。釅錒極額閉鎮檜豬訣錐。在後卷線筒的候部安裝有收線的平面渦旋簧。它的一端與後卷線筒相 聯，另一端與中介蓋板上的槽相聯。這樣當電源線向外拉

5、出時，渦旋簧就 會儲能。在後卷線筒上裝有壓緊板以防止渦旋簧在上預緊力時會彈出而增 加不安全因素。彈貿攝爾霽斃攬磚鹵廡。在前端由按鈕、釋放彈簧、鎖定片、前卷線筒上的棘輪組成收線的釋 放機構。當按鈕按下時，鎖定片會釋放前卷線筒上的棘輪機構，使電源線 收進。不按時，電源線停止。在按鈕、鎖定片下有復位彈簧。謀養摶篋飆鐸懟 類蔣薔。該收線機構下面有兩個螺釘將後蓋、中介蓋板鎖附在一起。在中介蓋 板的下部有卡勾機構，可以與隔基卡接。上部從後面穿過後蓋、中介蓋板有兩個螺釘鎖附在固定在本體上的鎖定片上。廈礴懇蹣駢時盡繼價騷。2. 排線方式比較：根據收線時電源線的排布方式，可將收線裝置分為單圈和多圈兩種 現將其特

6、點比較如下表排線方式單圈多圈典型樣機TSK-736SANY O A -R82(W)PANASONIC NI-45GX排線規律較規則隨機排列，每次都不同層次不分明，較不規則摩擦阻力只有上下圈之間的摩擦， 阻力小，拉收線時較順暢除上下圈之間的摩擦外， 左右及傾斜方向會產生 擠壓和斜嵌，磨損嚴重， 拉收線時較不順暢佔用空間（相同電源 線長度下）徑向佔用空間大軸向佔用空間小軸向佔用空間大徑向佔用空間小*收線控制依靠再次拉動電源線帶動棘 輪轉離卡點，使轉軸回轉依靠按鈕動作打開轉軸卡點 使其回轉*限速機構一般有一般無* i收線控制機構的方式與限速機構的有無，是在樣機拆解的基礎上的總 結，並非絕對。我們就曾

7、作過在7302單圈卷線機構上加按鈕控制，及在7861 卷線機構中取消按鈕而採用拉動電源線收線的嘗試，但未經量產的驗證。煢楨 廣鰳鯡選塊網羈淚。* ii 收線控制機構與限速機構的方式將于下具體闡述* iii 在多圈收線機構中未見到限速機構的一個可能原因?yàn)?，多圈?線需要達到一定的速度，以克服更大的收線阻力。我們發現，當速度較慢 時，線的分佈會嚴重不均勻而沿一圈迅速爬高，容易卡死。鵝婭盡損鶴慘歷蘢收線長度：電源線外露1。85M20 、1 aAo CfflTACTM2X1-AU4C730L11A鼻BACK CDVEfiPPK5108HI1Z33000403 巧 SCREWRIF MC16C73010

8、1A* KNOBPCL1250Y11533000-01-3*10«*SCREWBIP K «3>ll214C73O1O3AMAXFE S噸ET(SUS430I13C730113A> * dPRESS BOARI|PPK5108H11?C730114AREEL SPRHG豪111C730LIOA*鼻JtEK SPRINGk11033000-01-2£»6« 4rSCREWBIP NC A261639C73O112ABACK REELPCL1250Y18C730115AMMFRDNF REELIPCL1250Y17C73O1O6ALir

9、Ttimw<M402；16C73OLO8ABtG CKCUE*W®.4>I5-C73O1O7AESHrn£ CffiCIF4<JI0.4>r41C73Q1O4A廠AL SHEETLY1E««L2；3C73O1O2AI #«MfSPRING1SUS3022C 7 30109Am£ COVERPCL1250Yi13300(H)卜裟 12r< *SCREVLBTP MC 3«丘3 /# *JLM«*M3 .鎖定及收線機構的方式：I . 棘輪方式彈片.古3#牡*芾勒號哼直:理什禪渥實的外牖使凸

10、鞠朋憫動至同艮,背腺面訶砂.凸輪錚彳的作用下， 通砰壯向卷謀聞的TTW曲的工作tfi漠吏.此底廬止酬! r宦點他諸樹箱黑下,整髓 iw-m h帶耙輸咖憎動h i2i輪礦 旳應I氐工桿面才唾妄破鹽茫 啊艮也解 輕??！ 卷直面際禽.【惟卷盪筒時觀中亡I凸訥 命轉中日”凸砂蘋與渤7作豐牯干訟-MZW ,4 .由亍三角卿性，的凸科豎 誓需輪由互卡死.此時聯粽淳止.b .俘丸糞收需.乳童怦問外澄曲.亂卷痂宜疤 tW.溜醉錚樹乍WT R #t# 動下到禪冷百G最僧工作麗_做r松開壬瘴 導p此畤;卷綜筒壬收仙醴的作用下,Jim”收慮曲，|陽砂卻起灼匱和殆工菲面頂 紐需.便唏畸tw虬i_7 .收編琦，疇惟爾忡

11、嗚肓節護音工作麗擔嘩,凸辭竝知畦榨歎t8收躲h歸圧卷嫌肺吒工柞面釧燼 出脖凸希祀單巴旳恨尹F . WW#至 薛冷羣姑已朗的:養,.再次使用轉訃向外空e琦，卷線喬時牌對, 褲粽驚的最畜工柞面穗凸輛iiim針尊動，曲 抽展|醱瑕罐躥蘭比卡點.凸軸也也 加普癡筒的笳商工件面.律無回至哪隱i,此機構為大同公司的專利，目前736單圈卷線盤即為此機構TU-D1 SECHl-Hl SErGl-jL SECFl-Fl SE26,松黑電原線後的收線狀態.:j ,叵外秩記靖，松開電源線滑動軌道結構圖此機構為SAYO N產品卷線盤結構II I 按鈕控制機構怦祀盯上丁軍封.豐薩治卞-R吐T軍翰 便限辛戸刖騙旳音遽百苫

12、銷圭口目由車動./ 1zms'Kr、L目由”T-護'i'i ,!1 t_=11r/J/1rn_4 .限速機構：能匕瓦沖匸域戸理圖一I w離三.UL規格電源線的自動收線機構1.電源線規格美國市場極性插離心塊.妄裝在吞心牙上.可丄匚于:T底盯匚冋境動 蟄音唐奩總申r決時肆坤尙打軍戟同王7黒 盯廣壁.痙愛越?jīng)Q,訓雲k壁齊吒門茁六相亙 空1可月門超K :“而師婕匱的連廈隆丁士 .電壓：120V電源線外露長度：2 . 44m2. 安規要求裸露帶電體的電氣間隙1.6MM 電源線拉出收進600 0次，電源線的外絕緣護套不得磨破 電源線彎曲50000次。必須通過CUL的摔落測試。電源線

13、必須通過20磅(9 KG )的拉力測試。1.60 M M以上。對與收拉線6000 針對以上的安規要求，首先我們必須保證電氣間隙次，以及電源線彎曲50 00 0次，以及電源線彎曲50 00 0次，在機構上主要應注意入線口的設計入線口的上下兩側向內必須是大的圓弧過渡，以免尖銳的過渡會刮傷電源 線；另外電源線入口的左右兩側在與上下便過渡處不得出現銳角或凸出在 上下兩側上的銳邊。見下圖：預頌圣鉉儐歲齦訝驊糴。要通過CUL摔落測試及9千克力的拉力測試，則要注意收線裝置與本體、 隔基等的連接的強度及剛度；另外應該注意中介蓋板上轉軸的強度滲釤嗆儼 勻諤鱉調硯錦。3.有關專利:上下雨側一的咼聲三存T |刖遑曲

14、 上下兩邊的過、 .度羸下能有尖鋭 奏起的鋭魚， 鋭邊在7861的設計過程中，我們曾受到松下專利的困擾，主要的專利限制有兩I. 按鈕控制的收線機構若不用按鈕控制，則需採取大同的棘輪機構或三洋的滑動軌道機構,但也可能牽扯到這兩家公司的專利問題.II.底部開口以利收線這個限制條件對收線空間影響非常大，若要底部封口，則必須給定足夠的收線空間.（有關松下在美國申請的專利原文，請參照附4.空間要求（多圈）*«JL 鋼就“梢最小有就井薄立聞知二*常曲 0110(W豪 3 4 (JMD.三.JQA規格電 源線的 自動收 線機構1.電源 線規 格EDO日本 市場 兩扁 插A*««

15、 fl >UiEAWT>««#T 08.00 it 靜 m * ftfl.不直烏井雖星 ft,10 0V電源線外露長度：1 . 85m2. 安規要求裸露帶電體的電氣間隙2.5M M,電源線以30M/M IN的速度拉出1000 次，電源線的外絕緣護套不得磨破，線芯的斷線率不得超過30% ；不得有其 他異常情況。針對以上的安規要求，首先我們必須保證電氣間隙2. 50 M M 以上。對與收拉線1000次，在機構上主要應注意入線口的設計。入線口 的上下兩側向內必須是大的圓弧過渡，以免尖銳的過渡會刮傷電源線；另 鐃誅臥瀉噦圣騁貺頂廡。外電源線入口的左右兩側在與上下便過渡處

16、不得出現銳角或凸出在上下兩 側上的銳邊。見下圖：3. 有關專利（缺乏資料）.Trr wiri圓列:渦袴帀皐血 上TFT春日卞咼“ 度蕊不能有尖鋭鋭瘙I-B SEC4. 空間要求（多圈）以下有關自話收統規豬外珥昊隸陜”卜觀設計吋秦老.有關QA自動收蝮機枸就小有赴夕卜形空間雖團一所示為: 093（收嶷盤誕轉就小蠱間含兩儒璧厚：來3 V 4zt）. 衣吹換空聞以上 還應有 4半 現：的按斂運桿空間"此夕卜 在收蛭空間以殲述亙涼帝以安排下08：的趕個卷柱磚 空I軋姿排兩撼柱時不應與外址挾近以陥外毋收縮變謝收 統盤嶷捋中心西啟AAifeA-b距離知1 C形示蠹至君誥底面卄/ 冊示憲SI五.其他

17、收線方式為配合外觀上的需求，我們還作過一些卷線的方案，但由于問題較多， 都不成功,在這裡略為提及：1. 橡膠套式此種設想結構和原理十分簡單。在後蓋的前端長出一個有孔的卷線筒, 電源線從孔中通過，直 接與內配線相連。電源線卷在卷線筒上。線卷好後 將套在卷線筒後部的橡膠套翻過來護住電源線。但是經開了 一個簡易模後 發現了 許多 問題 而無法實 施。 擁締鳳襪備訊顎輪 爛薔。2. 連 桿轉 動的 手動收線 形式此 種形式結構與 自動 收線十分 相似 。 所 不同的 是 它的 後卷線筒 後部 沒 有裝儲 能的 平面 渦旋簧， 而是 從其後部長出 一個 軸， 在後 蓋的 後面 上 有一 個 連桿 ， 可

18、 以帶 動整個 卷 線輪 轉動。 從而達 到收 線的 功能 。 此 種形 式的 缺 點是 收 線要 手工 操作， 而 且收 線力一 旦取消 後， 卷緊的 線 會因 線的 回彈力 而松動 。 贓熱俁閫歲匱閶 鄴鎵騷。3. 插 頭端 的自 動收線機 構此 種設想是 將 收 線裝 置與 熨斗 分離 ， 而 靠近電源 線的 插頭端， 類似 于 收線裝 置帶 一插 頭， 而用 不帶 插頭的 電源線 連接 收線裝置 與熨 斗， 收線後 將 收線 裝置 掛在 熨斗上 。 壇摶鄉囂懺蔞鍥鈴氈淚 。附錄一(美 國自 動卷線專利)蠟變黲 癟報倀鉉錨鈰贅。Un ited St ates P atent 5,371,

19、960Wi lson , et al. December 13, 1994 買 鯛 鴯 譖曇膚遙閆擷凄。Ir on i ncl udi ng cord r eel and water tankAb stractA garment iron i ncl udi ng a rear face to which there is rel easabl y attached a cord reel. Th e cord reel includes a catch to retain it in its position mounted on the rear face. T he cord reel

20、is hollow so as to provide a cavity which receives a beaker which may be used to deliver water to t he water r eserv oi r of the i ron. During us e, the cord reel and beaker are removed from the rear face so that the i ron may be vertically o riented, resting on i ts rear face. 綾 鏑鯛駕櫬鶘蹤韋轔糴。驅躓髏 彥浹綏譎飴

21、憂錦。Inventors: Wi lson; Ian G. (Cheltenham, AU ); Ho ar e; Richard L. (Neutal Bay, A U) 貓 蠆 驢 繪 燈 鮒 誅 髏 貺 廡 。Assignee: Sunbeam Corporation Li mited (Campsie, A U) 鍬籟饗逕瑣 筆襖鷗婭 薔。Ap pl. No.: 9706 20Fi led: Nov ember 3, 1992U.S. Cl ass: 38/77.3; 3 8/96; 2 19/256In tern'l Cl ass: D06F 075/28Fi eld of

22、Search: 38/ 75 ,7 7. 1, 77.3 ,7 9, 88 ,9 4 219/246,247,256,25924 2/ 47. 5, 77 ,7 8. 7, 107.7 構氽頑 黌碩 飩薺 齦 話 騖。 輒 嶧陽 檉籪癤網儂號澩。References C ited Referenced By 堯 側閆 繭絳闕絢勵蜆贅。U.S. P atent Do cuments2063274 Dec., 1936 Ehrl ich 21 9/ 25 6.394949 9 A pr., 1 976 Schaeff er et al. 38/77.434742 8 A ug., 1982 C o

23、nrad et al. 38/88.4517757 M ay., 1985 A sada et al. 38/88.478461 6 No v., 1988 Zi mmermann 2 19 / 24 7. Foreign P atent Documents005325 4 J un., 1982 EP.258379 2 Dec., 1986 FR 219/247.382550 1 Feb. , 1990 DE.3843384 Jul., 1990 DE.0212631 M ar., 1941 C H 38/77.223398 6 J an. , 1991 GB.Pri mary Examin

24、er: Crow der; Cliffo rd D.As si stant Ex aminer: Iz aguirre; IsmaelAt torney, A gent or Firm: Ladas & Parry 識饒 鎂錕 縊灩 筧 嚌儼淒。Claims 凍鈹 鋨勞 臘鍇 癇 婦脛糴。1. A ga rm ent iron compri sing:a main body having a handle and a sol ep l at e, said body having a rear f ace provided wi th engageabl e means t here

25、at , 恥諤 銪滅 縈歡 煬鞏 鶩錦 。an el ect ri c cord ex t endi ng fr om said body for co nn ect i on wi th an electrical power suppl y to electri cally heat sai d so l epl ate, and 鯊腎 鑰詘 褳鉀 溈 懼 統庫 。 a cord r eel releasabl y attached to said rear face of t he bod y, said cord reel i ncl udi ng a fro nt f lange e

26、n gage abl e with said main body at said rear face thereof, and a resilient catch f or releasably securi ng the cord reel to said rear face of the main body, sai d resilient catch comprising a lever having an end lip, said resilient catch having a rest po si t i on i n which said l ip engages said e

27、ngageable means to secure the cord reel to said main body and a r el eas e posi tion in which said l ip i s released from said engageable means and said cord reel is released from said main body. 碩 癘鄴頏謅攆檸攜驤蘞。2. The ga r ment iron as claimed in claim 1, wherein said resilient catch compri ses a pivot

28、al lever integrally moul ded in said cord reel. 閿擻輳嬪諫遷擇 楨秘騖。3. The ga r ment iron as claimed in claim 1, wherein said cord reel includes a rear fl ange spaced from said front fl ange and forming a recess therebetween in which said cord can be wound when the cord reel is engaged wi th said main body,

29、 said rear fl ange havi ng top and bottom troughs i n which the cord is passed before being wound i n said recess. 氬嚕躑竄 貿懇彈瀘頷澩。4. The ga r ment iron as claimed in claim 3, wherein said front flange of the cord reel has a trough through which said cord can pass to one of the troughs of the rear fl an

30、ge of the cord reel. 釷鵒資贏車 贖孫滅獅贅。5. The ga r ment iron as claimed in claim 1, wherein said cord reel has a central chamber accessible through a rear facing opening of said cord reel, said ga rm ent iron further comprising a beaker enga geabl e in said central ch am b er. 慫闡譜鯪逕 導嘯畫長涼。6. The ga r ment

31、 iron as claimed in claim 5, wherein said beaker and cord reel have means for providing a snap fit for said beaker in said chamber. 諺 辭調擔鈧諂動禪瀉類。7. The ga r ment iron as claimed in claim 5, wherein said resilient catch compri ses a pivotal lever integrally moul ded i n said cord reel, said beaker hav

32、i ng a groove which extends between said top and bottom troughs when the beaker is engaged in said chamber for p as sage of the cord in said groove between sai d t ro ughs. 嘰 覲 詿 縲 鐋 囁 偽 純 鉿 錈 。8. The ga r ment iron as claimed in claim 5, wherein said beaker has a water cavity therein and a filling

33、opening. 熒紿 譏鉦鏌觶鷹緇機庫。9. In a ga rm ent iron havi ng a main body with an el ect ri cal power cord extendi ng from said body, the i mprovement compr ising a combi nation r emov abl e cord reel and beaker including, 鶼漬 螻偉閱劍 鯫腎邏蘞。a reel member havi ng a front face rel easabl y engageable with a rear fac

34、e of the main body, and a rear face spaced from said front face, said reel member havi ng a central chamber open and accessible at said r ear face of the reel m em b er, and 紂 憂 蔣 氳 頑 薟 驅 藥 憫 騖a beaker removably e nga geabl e in said chamber of the reel member, 穎芻莖蛺 餑億頓裊賠瀧。said reel member includi n

35、g f langes at said front and rear surfaces defi ning a recess therebetween i n wh ich the power cord of the m ain body can be wo und around said chamber when the reel member i s en gage d wi th said main body. 濫 驂 膽 閉 驟 羥 闈 詔 寢 賻 。10. Th e com bi nation clai med i n cl aim 9, w herein sai d rear fl

36、ange of the reel member has two opposed troughs therein in w hich t he cord i s passed before being wo und in said recess around s aid chamber. 銚 銻縵 嚌 鰻 鴻鋟 謎諏 涼。11. The combination as cl aimed in claim 10, wherein said f ront fl ange of the reel member has a trough through wh ich said cord can pass

37、to one of the troughs i n the rear fl ange of the reel member. 擠貼 綬電 麥結 鈺贖 嘵類 。12. Th e com bi nation as clai med in claim 9, wherein said reel member includes a releasable catch means for r el eas abl y engagi ng t he main body. 賠 荊紳諮侖驟遼輩襪錈。13. Th e com bi nation as clai med in claim 9, wherein sai

38、d fro nt f lange of the reel member in eludes m ea ns for en gag ing the main body.塤礙籟饈決穩賽釙冊庫。Descri pti onTEC HNIC A L FIE LDThe present invent ion r elates to a garment i ro n and more partieul arl y to a reel to reeeive the el eetri e eord of the i ro n. 裊 樣 祕廬 廂顫 諺鍘 羋藺 。BAC KGROUND OF THE IN VEN

39、T IO NEl eetri eally operated i rons are prov ided wi th an el eetrie eord to ex tend to a power outlet. It has been known t o provi de the rear end of irons wi th m eans about wh ieh the eleetri e eord may be wo und for storage pu rposes. However, thi s previ ous ly known means of s tori ng t he el

40、 eetrie eord has not been sueeessful as the eor d in essenee i s not retained i n a eoi led eonfi guration. There has also been t he need to reduee the overall length of the i ro n i n order t o ensure stabi lity of the i ro n when it rests on its rear faee so as to have the hot pl ate generall y up

41、wardl y ex tendi ng. If the rear of the i ron i s extended to aeeom mod ate the eord, the iro n beeom es l ess stabl e due to i ts height w hen i n the rest positi on. 倉 嫗盤紲 囑 瓏詁鍬 齊驁 。Steam iron s are provi ded wi th a resevoi r i nto whi eh water i s del ivered, wh ieh water i s transform ed i nto

42、steam during t he ironing pr oeess. Frequently new iro ns are sold w ith a beaker wh ieh may be u sed to deliver water t o the water i nl et of the i ron. These beakers are not physieall y assoei ated with the i ro n and aeeordi ngl y beeom e l ost. 綻 萬 璉轆 娛閬 蟶 鬮 綰瀧 。 OBJECT OF TH E INV ENT IONIt is

43、 the obj eet of the present i nvention t o overeome or subs tant ial ly ameliorate the above disadvantages. 驍 顧燁 鶚巰 瀆蕪 領鱺 賻。SUM MARY O F TH E IN VENT IO NThere is di sel osed herein a garm ent i ron eom pri sing: 瑣 釙濺 曖惲 錕縞 馭篩 涼 。a main body provi ding a handl e and being equi pped wi th a solepl at

44、e, and electrically operated means to heat the s ol epl at e, said body havi ng a rear face wi th en ga gabl e means; 鎦詩 涇艷損樓紲鯗餳類。an el ect ri c cord ex t endi ng from said body to con n ect said electrically operated means to an el ect ri c sup pl y; and 櫛緶歐鋤 棗鈕種鵑瑤錟。a cord reel about which said cor

45、d is wound, said reel having at t achm ent means to releasably engage said engagable means to selectively secure said reel to said main body. 轡燁 棟剛 殮攬 瑤 麗 鬮應 。Preferably the reel is hollow so as to provi de a cavi ty, and a beaker is shaped to be received wi thin said cavi ty. 峴 揚斕滾澗輻灄興渙藺。BRIEF DESC

46、RIPTION OF T HE DRAWIN GSA p referred form of the present invention will now be described by way of example with reference to the accompanying drawings w he rei n: 詩叁撻 訥燼憂 毀厲鋨驁。FIG. 1 is a schematic parts exploded perspective view of an iron incorporating a cord reel and beaker; 則鯤愜韋瘓賈暉園棟 瀧。FIG. 2 i

47、s a schematic rear elevation of the reel of FIG. 1; 脹鏝彈奧秘 孫戶孿釔 賻。FIG. 3 is a schematic fr ont elevation of the reel of FIG. 1; 鰓躋峽禱紉誦幫 廢掃 減。FIG. 4 is a schematic top pl an vi ew of the reel of FIG. 1; 稟 虛嬪賑維嚌妝 擴踴糶。 FIG. 5 is a schematic bottom pl an vi ew of t he reel of FIG. 1; and 陽簍埡鮭 罷規 嗚舊巋錟。FIG

48、. 6 is a schematic sectioned side elevation of the reel as illustrated in FIG. 5 sectioned along t he line 6-6. 溈氣嘮戇萇鑿 鑿櫧諤應。DES CRIPTIO N OF TH E PREFERRED EMBODIM ENTIn the accompanying drawi ngs there i s schematically depicted an i ron 10. The iron 10 includes a main body 11 provided with a sol e

49、p l at e 12 whi ch is electrically heat ed. The body 11 is also provided wi th a handle 13 and a rear face 14. Th e soleplate 12 is connected t o an electric cord 15, whi ch connects the soleplate 12 t o a supply of electri city. 鋇嵐縣緱虜 榮產濤團藺。 Ad jacent to the rear face 14 is a lip or flange 16, whi

50、ch pro vi d es an engagable means to be operatively assoc i at ed wi th a cord reel 17. Th e cord reel 17 has a forw ard fl ange 18 of "L-shaped" configur ation so as to have a base 19 and a forw ardly projecting l ip 20. The fl ange 20 ex t ends down the left and ri ght hand sides of the

51、reel 17 and is ada pt ed t o engage the fl ange 16 so that the reel 17 can be mounted adjacent to t he face 14. The fl ange 18 is particularly configured so that the reel 17 i s c ou pl ed to t he fl ange 16 by downward movement of t he reel 17 over the rear face 14. 懨俠劑鈍觸樂鷴燼觶 騮。The r eel 1 7 has a

52、recess 21 w hi ch fo rms a l oop and wi thin whi ch t he cord 15 is w ound. The rear of the reel 17 i s also provi ded with a flange 22 so that the cord 15 has its loops sa nd wi ched bet w een the fl anges 18 and 22. 謾 飽兗爭詣繚鮐癩別瀘。The reel 17 is of a tri angul ar confi guration wi th its upper apex p

53、rovi ded wi th a trough 23 having a forward aperture 24 which enables the cord 15 to enter the trough 23, and a rearward apert ure 25 enabl ing the cord to extend downwardl y from the trough 23 t o a lower trough 26. Th e cord 15 passes through t he trough 26 and then is wound around the reel 17 so

54、that the loops are contained in the recess 21. 咼 鉉們歟謙 鴣餃競蕩賺。The reel 17 Is of a hol low confi gu r at i on so as to provide a central chamber 27. Locatable wi thin t he chamber 27 i s a beaker 28 which is of a co m p l em ent ar y shape to the chamber 27 and includes a recess 29 into which the troug

55、h 23 proj ects, and a rear recess 30 down which the cord passes t o enter the trough 26. T he beaker 28 may be of a "dish" co nf i gur ation so as to have an open face or alternatively may be provided wi th a filling neck eq ui pp ed wi th a stopper. However the preferred construction of the beaker 28 has a fi lling ap ert ur e 38 which inhi bits storage of the beaker 28 with water i n it. 瑩 諧 齷 蘄 賞 組 靄 縐 嚴 減 。Preferably the beaker 28 can "snap" fi t within the chamber 27. 麩 肅鵬鏇轎騍鐐 縛縟糶。To secure the reel