大陸(matador)全鋼三鼓一次法成型機(jī)介紹_圖文

1、TruckTire Building Machine SAV Carcass building 1. Manually hanging the bead core into the carcass transfer system.2. Semiautomatic application of the inner liner sidewall assembly (precutto length on the carcass drum.3. Semiautomatic application of one or two bead reinforcement pairs.4. Semiautomat

2、ic application of the steel cord ply (pre-cutto length.5. Splicing the steel cord ply with the motor splicer (zipper.6. Automatic application of the shoulder cushion (pre-cutto length with manual splice adjustment. 7. Automatic carcass stitching.Belt building8. Manually loading the tread servicer.9.

3、 Automatic application of four different beltplies (pre-cutto length with splice adjustment. 10. Semiautomatic application of belt edge filler strips. (optional11. Automatic application of tread with spliceadjustment. Shaping12. Automatic transfer of carcass to shaping drum. 13. Automatic transfer o

4、f belt tread assembly toshaping head.14. Automatic shaping of carcass.15. Automatic stitching of tread-belt assembly. 16. Automatic turning up of sidewall.17. Automatic stitching of complete green tire. 18. Automatic removal of finished green tires fromthe shaping head.Carcass machine Carcass servic

5、er Belt/shapingmachine Belt ply servicerBelt edge filler strip servicer Tread servicer Transfer system Stitching systems ControlsTechnical Data Tire bead diameter 19.5 - 24.5 Inner liner sidewall width 520 - 1450 mm Bead reinforcement width 25 - 200 mm Steel cord ply width 500 - 950 mm Shoulder cush

6、ion strip width 30 - 155 mm Shoulder cushion plate width 200 - 390 mm Bead core spacing min./max. 420 - 850 mm Belt width 90 - 320 mm Belt edge filler width 30 - 60 mm Belt drum diameter 720 - 1100 mm Max. tread width 375 mm Max. tire diameter 1130 mm Cycle time per tire 140 - 170 s * Technical fail

7、ure rate 2.5% (in accordance with VDI 3423 guidelines Conversion time for size approx. 15 - 45 min. * changes Manpower requirements 2 machine operators Space required 13000 x 16800 x 3700 mm (L x D x H (excl. switch cabinets Power Data Electrical Data Line voltage/frequency: Fuse protection: Connect

8、ing power: Pneumatical Data System pressure (dried air: 0.8 MPa (8 bar Vacuum: 0.4 bar (60% Consumption per tire: approx. 0.01 m3 (norm 3 x 400 V / 50 Hz 3 x 160 A 55 kVA Depends on the tire design and, if using the basic machine, on perfect materials as well as operators trained according to Contin

9、ental standards. * Within a one inch range, with prepared replacement tools and trained operating staff, and depending on the number of tire components concerned. * Continental AG CM Conti Machinery Hannover - Germany Jdekamp 30 D - 30419 Hannover - Germany Phone: +49 511 976-6780 Fax: +49 511 976-6086 CM Conti Machinery Pchov - Slovak R