基于ProE的加濕器外觀造型設計畢業論文.doc

本科畢業論文（設計）論文題目：基于Pro/E的加濕器外觀造型設計學生姓名所在院系：機電學院所學專業：機電技術教育導師姓名：完成時間：摘要1本文應用Pro/E軟件完成加濕器產品設計，主要包括零件的三維建模、虛擬裝配、干涉檢查等。首先采用可變剖面等功能建立加濕器噴氣嘴罩模型，然后建立加濕器噴嘴、水箱、底座等模型，最后把設計好的模型進行虛擬裝配，對裝配體進行干涉檢查。通過對加濕器產品的設計，證明應用Pro/E軟件完成新產品的設計，可以大大提高設計效率，縮短設計周期，增強產品的市場競爭能力。關鍵字：Pro/E,裝配設計，模型，三維建模，加濕器2TheappearancedesignofhumidifierbasedonPro/EAbstractInthispaper,thedesignofhumidifierproductwascompletedbyPro/Esoftware,Mainlyinchludingthethree-dimensionalmodelingofparts,virtualassembly,interferencechecks,ect.Firstofall,thehumidifiernozzleyetcovermodelwasestablishedbyapplyingvariablesectionfeaturesfunction,andthenthehumidifiernozzles,watertanks,suchasmodelbasewasestablished,andfinallyamodelforthedesignofvirtualassembly,interferenceoftheassemblyinspection.ThroughthedesignofhumidifierwhichwascompletedbyPro/Esoftware,toimprovethePro/Esoftwarecangreatlyimprovedesignefficiencyandshortenthedesigncycle,andenhancemarketcompetitiveness.Keywords:Pro/E,assemblydesign,model,three-dimensionalmodeling,humidifier3目錄1緒論.41.1三維造型設計的現狀和發展.41.2常用三維軟件的介紹.41.2.1UG.41.2.2SolidWorks.41.2.3Pro/E.51.3Pro/E軟件介紹.51.4本文主要研究內容.62設計造型過程.62.1加濕器實體造型.62.1.1加濕器噴氣嘴罩造型.62.1.2加濕器噴嘴造型.82.1.3加濕器水箱造型.122.1.4加濕器底座造型.142.2加濕器虛擬裝配設計.