pix4dapp基本配置.doc_第1頁
pix4dapp基本配置.doc_第2頁
pix4dapp基本配置.doc_第3頁
pix4dapp基本配置.doc_第4頁
pix4dapp基本配置.doc_第5頁
已閱讀5頁,還剩7頁未讀 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

基本配置 Mobile device with Android 4.0 or later with at least 500 MB of free space to store the images. DJI Phantom 2 Vision+ (optimal, recommended) or DJI Phantom 2 Vision (compatible).Step 1. Prepare the droneWarning:Know your drone and how to fly it manually.Before using Pix4Dmapper Capture App, it is required to first learn how to fly the drone manually. Manual control of the drone is the only way to avoid obstacles or get back a drone that flies away due to GPS interferences.For more information have a look at the drones user manual:DJI Phantom 2 Vision+ User ManualThe DJI Phantom 2 Vision+ is an autonomous and self-driven drone. The App is connected to the drone through Wi-Fi. Before takeoff, the App sends to the drone the GPS position of a predefined number of waypoints. During flight, the drone will follow these waypoints. The App sends a signal to the drone using the Wi-Fi each time an image should be taken. Wi-Fi connection with the drone is required. If the Wi-Fi connection is broken, images are not taken anymore. However the drone continues the mission as the waypoints are saved on the drone before takeoff. Good GPS signal is required. If the drone misreads the GPS coordinates internally, it might fly away in a random direction. This happens when the drone is flying in an environment where the GPS signal gets interferences. For example it may happen if the drone flies close to large metallic structures or in areas where the GPS signal bounces back on objects such as high buildings. Manual control is required to get back the drone. Obstacles: Ensure that no obstacle is between the drone home/takeoff point and the flight altitude during takeoff or landing. Battery: As the battery lifetime depends on multiple factors such as wind, altitude, temperature, etc., it is impossible to predict the lifetime of the battery. If the App is connected to the drone through the Wi-Fi and the battery is under 20%, the drone flies home. Manual control might be required at that stage.Important: Choose a clear takeoff/landing zone of at least 10x10 meters that can get easily GPS signal. Before taking off, check that: The drone, remote controller and range extender batteries are charged. The propellers are correctly mounted. The propellers/engine are functioning. Do not fly over crowds. Respect your regional and national flight regulations.Step 2. Prepare the missionThere are 2types of missions: Grid Mission: Recommended for most of the environments. It ensures that the images are taken with the optimal overlap required to get accurate 3D models and maps. Free Flight Mission: Recommended to map more difficult objects (e.g. sides of houses, towers, pylons, bridges, etc). It requires to pilot the drone and to understand how to fly an optimal flight path.Prepare a Grid MissionThe grid mission is well suited for most of the environments. It ensures that the images are taken with the optimal overlap required to get accurate 3D models and maps. To prepare a grid mission:1. Open the App.2. (optional) In the home screen, clickSettingsand change the overlap between the images as well as the angle of the camera.For more information about the settings:203873435.3. In the home screen, clickGrid Mission.TheMap Viewis loaded.Tip: If you are connected to the Internet, a background map is displayed. The mission can also be prepared in your office. The displayed map is cached and will be available when starting the mission in an area without Internet connection.4. (Optional) On the left of the screen, select the desired flight altitude.5. Place the grid over the area of interest. To move the grid, press with the finger in the middle of the grid and drag it. To rotate the grid, press with the finger on one of the arrows on the border of the grid and rotate it. To resize the grid, press with the finger on one of the small squares on the grid border and drag it.Note: Grid size: The default grid settings (50x50 meters) define a small flight of about 5-10 minutes that works in almost all conditions. By increasing the grid, the flight time is increased as well. Ensure that you have enough battery if you increase the grid size. The battery lifetime depends on many factors such as wind, temperature, age of the battery, etc. Grid color: The grid is displayed in green as long as the size is optimal to perform a flight with a fully charged battery. If the grid size becomes slightly too large such that there might be not enough battery to perform the whole mission, the grid is displayed in yellow. If the grid is too small to ensure good quality 3D models and maps it is displayed in yellow as well. If the grid is too large to be flown with a fully charged battery, it is displayed in red. In this case it is recommended not to fly and to give the grid a better size.6.Start the missiononce it is prepared.Prepare a Free Flight MissionFor advanced users: Free flight missions are recommended to map more difficult objects (e.g. sides of houses, towers, pylons, bridges, etc). It requires to pilot the drone and to understand how to fly an optimal flight path. For more information on how to prepare and start a free flight mission:203081219.Step 3. Start the missionOnce the grid mission has been prepared, it can be started.1. Place the drone in a clear area of at least 10 by 10 meters that can get easily GPS signal.2. Turn on the Wi-Fi range extender of the remote control.3. Turn on the remote control.Warning: TURN ON THE REMOTE CONTROL before flying. If it is not turned on you cannot go back to manual control of the drone. Manual control of the drone is the only way to recover a drone that flies away or to avoid obstacles.4. Turn on the drone.5. Verify that you can start and stop the propellers manually.6. Set the S1 switch to the top position.7. In the App, click.Note: The drone will not take off at this point.8. Read carefully the safety instructions that are displayed and clickNext.9. Check that the App is connected to the drone through Wi-Fi. If yes, clickNext.If not, clickWi-Fi Settingsand go to the Wi-Fi settings of your device. Select the drones Wi-Fi and go back to the App and clickNext.Note: If you were already connected to this drone in the past, the App will connect automatically.10. Verify that all security checks that are displayed are green. If yes, the drone can take off. If not, solve each security issue until it becomes green. For more information on how to solve the security issues:204113219.11. Press 3 seconds on the button. The drone iconnext to the button goes up. When it reaches the top of the pop-up, the drone will take off within a few seconds.Note: There are 2 ways to start a mission:1. Place the drone on the ground and start the mission.2. Fly the drone manually and when it is less than 150m from the center of the grid, start the mission.When the drone is takes off, it flies vertically up to the altitude of the mission and then goes to the first waypoint.12. During the mission: Keep your hands on the remote control. Keep visual control of the drone.Warning: In case of danger, flip down the S1 switch of the remote control. This will switch to manual mode and you can take back control of the drone using the remote control.Note: During the mission: The map view displays the current position of the drone. It allows to keep track of the mission. When the drone reaches the mission altitude, check that the camera is pointing down. It can happen that the gimbal is not properly initialized and that the camera is not looking down. If the camera is not looking down, the results will not be optimal. The gimbal can be manually changed during flight by going to the camera view and pressing the down arrow. For more information about the camera view:203873435. The waypoints are uploaded to the drone at the start of the mission. The signal to take a picture is send from the App during the mission. If there is an issue with the App or the device, the drone finishes its mission by following the waypoints. However, no images are taken and the mission has to be redone.13. At the end of the mission, the drone comes back to the home pointand lands automatically. When the drone touches the ground, it stops after some seconds.Warning: Due to the GPS inaccuracy, the drone might land a few meters away from the starting point. If the drone is landing in a place where it should not land, put the S1 switch down and land the drone manually.Tip: When the drone is landing, you can catch it from the bottom and hold it in a steady position. The propellers will turn off automatically after a few seconds.Step 4. Synchronize the mission with the device1. At the end of the mission, when the drone comes back and lands, the images on the drone are synchronized with the App. During this process, accurate image geolocation is written into the image EXIF data. Do not turn off the drone and the range extender until the synchronization is completed.2. (optional) Image synchronization can be aborted and restarted later. To abort synchronization, close the synchronization window. For more information on how to restart the synchronization later:204716225.Step 5. Get a quick 3D previewOnce the mission is synchronized to the device, it can be uploaded to your Pix4D User Account to get a quick 3D preview.1. In the home screen, open theMission Managerby clickingMissions to 3D models/maps.2. Select the mission to upload. Missions that are synchronized, but not yet uploaded are marked with the logo:.3. ClickUpload to Pix4Dcloud.Important:By default, the optionReduce images for quick previewis enabled and uploads half resolution images with lower JPG compression quality. This option reduces the image size from 5MB to 1MB and thus the upload time is 5 times faster. The visual quality of the mesh is slightly lower. For measuring applications, it is advised to use the full size images.4. When the upload is finished, you will receive an email informing you that the project has been uploaded and that processing

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論