出貨檢驗報告-中英文版.doc

Outgoing Quality Control ReportInspection Date:Customer NameOrder No.Product NameSpecification Total Production Quantity Result :NG NOT GOOD OKSampling Standard:Sampling Inspection InstructionQuality Requirement：CR:(CRITICAL) 0 MA(MAJOR):0.4 MI(MINOR):1.0一、 Visual and Dimensional InspectionNo.PartsInspection ItemsInspection MethodTest equipmentDefectResultsRemarkNGOKUnacceptable 1Outside Carton1.1 Damage/ DirtVisual InspectionVisual Inspection1.2 Length* Width* Height Check it up with BOMCalipers1.3 Content/stickiness/damage of the tags Check it up with dataVisual Inspection2Inner Box2.1 Damage/ DirtVisual InspectionVisual Inspection2.2 Length* Width* HeightCheck it up with BOMCalipers2.3 Content/stickiness/damage of the tagsCheck it up with dataVisual Inspection2.4 Package Check it up with orderVisual Inspection3Ontology3.1 color/appearance/cleanlinessVisual InspectionVisual Inspection3.2 Seize of the lampCheck it up with BOMCalipers 二、TestNo.Inspection ItemsInspection Method & StandardActual ParameterTest equipmentDefectResults RemarkNGOKUnacceptable 4Aging TestUnder the punch of aging machine 4HAging Machine5Puncture TestUnder the punch of aging machine4HAging Machine6PowerThe use of power meter+1WPower Meter6Color TemperatureThe same as customers requirementIntegrating Sphere7CRIThe same as customers requirementIntegrating Sphere8AngleThe same as customers requirement Integrating SphereInspector：出貨檢驗報告檢驗日期：客戶名稱定單號產品名稱產品規格生產總數結論：NG OKInspection Standard抽樣檢驗指導書質量要求：致命瑕疵（CR:0) 嚴重瑕疵（MA:0.4）輕微瑕疵（MI:1.0）一、外觀尺寸檢驗序號部位檢驗內容檢查方法檢驗設備缺點別檢驗結果說明NGOK不接受1外箱1.1外箱表面破損、臟污目測目測1.2外箱的長*寬*高與BOM表核對卷尺1.3貼紙內容、粘性、破損與數據檢驗目測2內盒2.1內盒表面破損，臟污目測目測2.2內盒的長*寬*高與BOM表核對卷尺2.3貼紙內容、粘性、破損與數據檢驗目測2.4內盒包裝物與定單核對目測3本體3.1顏色、外觀、潔凈度目測目測3.2整燈的尺寸與BOM表核對卡尺二、測試檢驗序號檢驗內容檢查方法及標準實際參數檢驗設備缺點別檢驗結果說明NGOK不接受4老化測試使用老化機沖壓狀態下4H老化機5耐壓測試使用老化機脈壓沖