ansys分析連續梁橋.doc

fini/clear/title,60+100+60 three span continous bridge/prep7!上頂板的關鍵點位置k,1,0,0k,2,-1.5k,3,-2.5,-0.15k,4,-2.95,-0.15k,5,-3.4,-0.15k,6,-3.8,-0.075k,7,-4.2,0k,8,-4.6,0.075k,9,-5,0.15k,10,-5.4,0.225k,11,-6.1,0.225!下底板的關鍵點位置k,12,-2.95,-4.5k,13,-4.5!上頂板關鍵點15m的位置kgen,4,1,13,1,0,0,5,100!上頂板關鍵點58m的位置kgen,10,301,311,1,0,0,43/9,100!上頂板關鍵點60m的位置kgen,2,1,11,1,0,0,60,1300!上頂板關鍵點62m的位置kgen,2,1,11,1,0,0,62,1400!上頂板關鍵點62+43m的位置kgen,10,1401,1411,1,0,0,43/9,100!上頂板關鍵點110m的位置kgen,2,2301,2311,1,0,0,5,100c1=0.0016225 !邊、中跨的二次拋物線系數*dim,x1,array,9 !定義邊跨的九分點位置*do,i,1,9,1 x1(i)=i*43/9*enddo*dim,x2,array,9 !定義中跨的九分點位置*do,i,1,9,1 x2(i)=i*43/9*enddo!下底板邊跨（58m）九分點關鍵點的y坐標位置*dim,yb,array,9*do,i,1,9,1 yb(i)=c1*x1(i)*2*enddo!下底板中跨（105m）九分點關鍵點的y坐標位置*dim,ym,array,9*do,i,1,9,1 ym(i)=-c1*(x2(i)-43)*2+3*enddo!生成下底邊跨（60m）九分點的關鍵點*do,i,1,9,1 kgen,2,312,313,1,0,-yb(i),x1(i),i*100*enddo!下底板60m，62m處關鍵點kgen,3,1212,1213,1,0,0,2,100!生成下底中跨（62+43m）九分點的關鍵點*do,i,1,9,1 kgen,2,1412,1413,1,0,ym(i),x2(i),i*100*enddo!生成下底中跨110m處關鍵點kgen,2,2312,2313,1,0,0,5,100!邊墩處的橫隔板位置kgen,2,1,13,1,0,0,-0.75,50!連成板面!上頂板,板厚0.5met,1,shell63mp,dens,1,2500mp,ex,1,3.5e10mp,prxy,1,0.1667r,1,0.5*do,i,0,23,1 a,1+i*100,1+(i+1)*100,2+(i+1)*100,2+i*100*enddoa,1,51,52,2aatt,1,1,1asel,none!上頂板的加腋，板厚0.8mr,2,0.8*do,i,0,23,1 a,2+i*100,2+(i+1)*100,3+(i+1)*100,3+i*100*enddoa,2,52,53,3aatt,1,2,1asel,none!肋板與翼緣交界處,板厚0.95mr,3,0.95*do,i,0,23,1 a,3+i*100,3+(i+1)*100,4+(i+1)*100,4+i*100 a,4+i*100,4+(i+1)*100,5+(i+1)*100,5+i*100*enddoa,3,53,54,4a,4,54,55,5aatt,1,3,1asel,none!翼緣厚度漸變，下面定義翼緣板的漸變厚度*dim,hd,array,7hd(7)=0.2hd(6)=0.2hd(5)=1/5*0.75+0.2hd(4)=2/5*0.75+0.2hd(3)=3/5*0.75+0.2hd(2)=4/5*0.75+0.2hd(1)=0.95*do,i,1,6,1 r,30+i,hd(i),hd(i),hd(i+1),hd(i+1) !定義漸變的翼緣厚度*enddo*do,i,0,23,1 *do,k,5,10,1 a,k+i*100,k+(i+1)*100,k+1+(i+1)*100,k+1+i*100 a,k,k+50,k+1+50,k+1 aatt,1,k+26,1 asel,none *enddo*enddoasel,none!肋板厚度0.9mr,4,0.9*do,i,0,23,1 a,4+i*100,4+(i+1)*100,12+(i+1)*100,12+i*100*enddoa,4,54,62,12aatt,1,4,1asel,none!下底板厚度0.41.0m按二次拋物線過度c2=0.00035693 !邊跨底板厚度變化的二次拋物線系數*dim,h1,array,16 !邊跨底板厚度 h1(1)=0.4h1(2)=0.4h1(3)=0.4*do,i,4,13,1 h1(i)=0.4+c2*(i-4)*43/9)*2*enddoh1(14)=0.4+c2*43*2h1(15)=0.4+c2*43*2!生成邊跨的底板單元*do,i,1,14,1 r,40+i,h1(i),h1(i),h1(i+1),h1(i+1) a,12+(i-1)*100,12+i*100,13+i*100,13+(i-1)*100 aatt,1,40+i,1 asel,none*enddoa,12,62,63,13 !橫隔板底面aatt,1,41,1*dim,h2,array,11 !中跨底板厚度h2(11)=0.4h2(10)=0.4h2(9)=0.4+c2*(1*43/9)*2h2(8)=0.4+c2*(2*43/9)*2h2(7)=0.4+c2*(3*43/9)*2h2(6)=0.4+c2*(4*43/9)*2h2(5)=0.4+c2*(5*43/9)*2h2(4)=0.4+c2*(6*43/9)*2h2(3)=0.4+c2*(7*43/9)*2h2(2)=0.4+c2*(8*43/9)*2h2(1)=0.4+c2*(9*43/9)*2!生成中跨的底板單元*do,i,1,10,1 r,60+i,h2(i),h2(i),h2(i+1),h2(i+1) a,12+(i+13)*100,12+(i+14)*100,13+(i+14)*100,13+(i+13)*100 aatt,1,60+i,1 asel,none*enddoallselesize,0.8mshape,0mshkey,