電纜選型_圖文

1、特種電纜Special Cable耐高溫(阻燃電力電纜High temperature resistant( ame retardantpower cable 硅橡膠絕緣(阻燃軟電力電纜Silicon rubber insulation( ame retardant exible power cable 硅橡膠(阻燃 扁電力電纜Silicon rubber ( ame retardant at power cable 硅橡膠(阻燃 控制軟電纜Silicon rubber ( ame retardantcontrol exible cable 低煙低鹵阻燃控制電纜Low smoke low ha

2、logen ame retardant control cable 無鹵低煙阻燃、耐火電纜Low smoke zero halogen ame retardant re resistant cable 耐火電纜Fire resistant cable氟塑料絕緣耐高溫控制電纜High temperature resistant control cable with Fluoroplastic insulation 丁腈聚氯乙烯復合物軟電纜Butadiene PVC compound Flexible Cable 自控溫伴熱電纜Self-thermal control heating cable

3、恒功率電熱帶Constant power electrically-heated tape AF-200、AF-260型氟塑料安裝線AF-200 & AF-260 Fluoroplastics installation wire AF-125型氟塑料安裝線AF-125 type Fluoroplastics installation wire 180電機繞組引接軟電纜180 exible cable for motor winding connection 具有屏蔽和耐化學藥品功能的電力電纜Power cable with shielding and chemical medicine

4、 resistance安徽天康(集團股份有限公司AnhuiTiankang(GroupSharesCo.,Ltd 地址:安徽省天長市仁和南路20號ADD:No.20southRenheroad,Tianchang,Anhui 郵編(ZIP:239300電話(TEL:0550-*傳真(FAX:0550-*網址E-Mail:tiankangzch:耐高溫(阻燃電力電纜High Temperature Resistant (Flame Retardant Power Cable本產品適用于額定電壓0.6/1kV及以下的高溫范圍和惡劣環境內,作電氣設備電能傳輸線。It is used as power

5、 transmission cable for electric equipments of rated voltage 0.6/1kV or lower in bad environment or that with high temperature.一、生產執行標準采用企業標準Executive standard: enterprise standard二、使用特性Performance in Usage1、額定電壓UO/U: 0.6/1kV。2、電纜允許最高工作溫度: 氟塑料絕緣及護套為200;氟塑料絕緣耐熱105聚氯乙烯護套為105;氟塑料絕緣硅橡膠護套為180。3、短路時(最長持續間

6、不超過5S電纜導體的最高溫度不超過250。4、電纜敷設溫度應不低于-15。5、電纜的彎曲半徑如下:單芯電纜:其彎曲半徑不小于電纜外徑的20D。三芯電纜:其彎曲半徑不小于電纜外徑的15D。6、氟塑料絕緣及護套型電力電纜具有優異的耐化學腐蝕性、耐高溫及阻燃性。1: Rated voltage UO/U: 0.6/1kV2: Max.working temperature allowed by cable is 200 for cable with fluoroplastic insulation and sheath, 105 for cable with fluoroplastic insula

7、tion,105 heat resistanc and PVC sheath, and 180 for cable with uo-roplastic insulation and silicon rubber sheath.3: Max temperature of cable conductor is no more than 250 during short circuit (The longest lasting time is no more than 5s.4: Temperature for installation is no less than -15.5: Bending

8、radius of cable as follows:It is no less than 20 times that of cable outer diam-eter for cable with single coreIt is no less than 15 times that of cable outer diameter for cable with 3 cores6: Power cable with fluoroplastic insulation and sheath has good features of chemical corrosion resis-tance, h

9、igh temperature resistance and ame retardance.三、電纜的型號名稱Type and Description1、電纜的型號名稱如表1 Type and Description in Table 1 Table 1注:型號中“22”表示鋼帶鎧裝,如需鋼絲鎧裝結構應將型號中的“22”改為“32”即可。Note: 22 means steel tape armor “22”should be changed into “32”for cable with steel wire armor (if needed.116四、電纜規格 Speci cation o

10、f Cable電纜規格表示為芯數×導體標稱截面mm2,其芯數及導體標稱截面如表2“core number * nominal cross section” stands for cable specification. Please see the following table 2 for core number and nominal cross section Table 2五、技術參數 TechnicalParameter1、20導體直流電阻應符合GB/T3956標準規定。2、電纜應經受3500V交流耐壓試驗5min絕緣不擊穿。1: DC resistance of cond

11、uctor at 20 shall meet the requirement of GB/T3956 standard.2: Cable shall bear AC voltage test of 3500V for 5min without puncture of insulation.六、交貨長度 Deliverylength允許根據雙方協議長度交貨;長度計量誤差不超過±0.5%。Delivery length of cable depends on both agreements with length error allowance of ±0.5%ANHUI TI

12、ANKANG(GROUPSHARES CO.,LTD. 117硅橡膠絕緣(阻燃軟電力電纜Soft Power Cable with Silicon Rubber Insulation(flame retardant本產品適用于額定電壓0.6/1kV及以下的高溫范圍和惡劣環境內,作電氣設備電能傳輸線。它具有優良的耐高溫、阻燃、耐輻射、耐老化、耐臭氧、防水等特性,并具有很好的耐寒性、耐候性。It is used as power transmission cable of electric equipments of rated voltage 0.6/1kv or lower in bad en

13、-vironment or that with high temperature. It has good fea-tures of high temperature resistance, flame resistance, radiation resistance, aging resistance, ozone resistance, water proof, freezing resistance, weather resistance etc.一、生產執行標準:采用企業標準。Executive standard: enterprise standard二、使用特性Performanc

14、e for Usage1、額定電壓UO/U:600/1000V。2、電纜允許工作溫度范圍-60+180。3、短路時(最長持續間不超過5S電纜導體的最高溫度不超過250。4、電纜敷設溫度應不低于-20。5、電纜的彎曲半徑如下:單芯電纜彎曲半徑不小于電纜外徑的15D;(D-電纜外徑;三芯電纜彎曲半徑不小于電纜外徑的12D。1: Rated voltage UO/U:600/1000V2: Working temperature allowed by c able is -60+180.3: Max temperature of cable conductor is no more than 250

15、 during short circuit(The longest lasting time is no more than 5s.4: Temperature for installing is no less than -20.5: Bending radius of cable as follows:It is no less than 15 times that of cable outer diameter for cable with single coreIt is no less than 12 times that of cable outer diameter for ca

16、ble with three cores三、電纜型號名稱Type and Description1、電纜型號名稱如表1 Type and Description Listed in the Following Table Table 1注:型號中H-硅橡膠電力軟電纜系列代號,G-硅橡膠絕緣或護套,VF-丁腈聚氯乙烯護套,P-銅絲編織屏蔽,22-鋼帶鎧裝,如需鋼絲鎧裝結構應將型號中的“22”改為“32”即可。Note: type-naming codeH means series No. of silicon rubber power soft cable.G means silicon rub

17、ber insulation or sheathVF means butadiene PVC sheathP means copper wire braided shielding22 means steel tape armor“22”in the original type should bechanged into “32” for cable with steel wire armor (if needed.118四、規格范圍 Speci cation電纜規格用導體芯數×導體標稱截面mm2表示,如表2 :“core number * nominal cross section

18、 area” standsfor cable speci cation. Please see the following table 2 Table 2五、技術參數 Technicalparameter1、成品電纜導體20時直流電阻:應滿足GB/T3956標準要求,成品電纜導電線芯的直流電阻,換算到電纜長度為1m,標稱截面為1mm2和溫度為20時,銅芯線芯應不大于0.0184。2、成品電纜絕緣線芯的絕緣電阻:成品電纜絕緣線芯的絕緣電阻,換算到電纜長度為1km和溫度為20時,導電線芯截面在50mm2及以下的應不小于50M,70185mm2的應不小于35M。3、成品電纜應經受工頻交流試驗電壓30

19、00V、5min電壓試驗,絕緣無擊穿。1: DC resistance of nished cable conductor at 20shall meet the requirement of GB/T3956 standard. Con-ductive core DC resistance of nished cable is no more than 0.0184 for cable with cross section 1mm2 under the condition that cable length is 1m and temperature is 20.2: Insulated r

20、esistance of finished cable insulated conductor will be no less than 50M for cable with con-ductive core cross section 50mm2 or lower and 35 Mfor cable with conductive core cross section 70185mm2 under the condition that cable length is 1km and tempera-ture is 20.3: Finished cable shall bear A.C vol

21、tage test of 3500V under power frequency for 5 minutes without puncture of insulation.六、交貨長度 DeliveryLength允許根據雙方協議長度交貨;長度計量誤差不超過±0.5%。Delivery length of cable depends on both agreements with length error allowance of ±0.5%ANHUI TIANKANG(GROUPSHARES CO.,LTD. 119硅橡膠(阻燃扁電力電纜Silicon Rubber (f

22、lame retardant Flat Power Cable該電纜廣泛應用于起重、運輸、機械、電氣、鋼鐵、醫藥、冶金、港口、礦山、物流、倉儲等行業的0.6/1kV 及以下各種移動動力裝置的電源連接及控制、信號、照明等。It is used as power connection & controlling & signal& lighting of various moving power equipment, in the eld of lifting, transportation, machine, electronic, steel, medi-cine, m

23、etallurgy, port, mine and storage etc.一、生產執行標準: 采用企業標準Executive standard: enterprise standard 二、使用特性Performance for Usage1、額定電壓:UO/U 為0.6/1kV 。2、電纜允許工作溫度范圍:硅橡膠絕緣-60+180;氟塑料絕緣-60+200。3、短路時(最長持續間不超過5S電纜導體的最高溫度不超過250。4、電纜敷設溫度應不低于-20。5、纜最小彎曲半徑為電纜小邊長度的10倍。1: Rated voltage UO/U:0.6/1kV2: Wo r k i n g t e

24、m p e r a t u r e a l l o w e d by c a b l e: -60+180 for cable with silicon rubber insulation; -60+200 for cable with uoroplastics insulation3: Max temperature of cable conductor is no more than 250 during short circuit(the longest lasting time is no more than 5s.4: Temperature for installing is no

25、 lower than -20.5: Min. bending radius of cable is 10 times that of small border length of cable.三、電纜的型號名稱Type and Description1、電纜型號名稱如表1Type and description of cable listed in table 1Table 1型 號Type 名 稱Description(ZR-YGCB 硅橡膠絕緣硅橡膠護套(阻燃扁電力電纜( ame retardantFlat power cable with silicon rubber insulati

26、on and sheath (ZR-YF46GRB聚全氟乙丙烯絕緣硅橡膠護套(阻燃扁電力電纜( ame retardantFlat power cable with F 46 insulation and silicon rubber sheath2、電纜結構圖如下:The gure of cable structure 銅芯軟導體 Cu core soft copper 硅橡膠絕緣 Silicon rubber insulation 硅橡膠護套 Silicon rubber sheath 銅芯軟導體 Cu core soft conductor 聚全氟乙丙烯絕緣 F 46 insulatio

27、n 硅橡膠護套 Silicon rubber sheath四、主要性能參數Main Performance Parameter1、在20時導體直流電阻應符合下表規定:DC resistance of conductor at 20 shall meet therequirements of the following table: 2、規格及參考數據如下表規定:Speci cation and data for reference stipulated in the following table:3、成品電纜線芯的絕緣電阻成品電纜絕緣線芯的絕緣電阻,換算到電纜長度為1km 和溫度為20時,導

28、電線芯截面在50mm2及以下的應不小于50M,70185mm2的應不小于35 M;多芯電纜的成品電壓試驗應經受交流50HZ,試驗電壓3500V、5min,絕緣無擊穿。Insulated Resistance of Finished Cable ConductorInsulated resistance of nished cable insulated con-ductor will be no less than 50M for cable with conduc-tive core cross section 50mm2 or lower and 35 Mfor ca-ble with c

29、onductive core cross section 70185mm2 under the condition that cable length is 1km and temperature is 20. Finished cable with multi-core shall bear voltage test of 3500v, AC 50Hz for 5 minutes without puncture of insulation.五、交貨長度 DeliveryLength允許根據雙方協議長度交貨;長度計量誤差不超過±0.5%。Delivery length of cab

30、le depends on both agreements with length error allowance of ±0.5%硅橡膠(阻燃控制軟電纜Silicon Rubber(flame retardantControl soft Cable本產品適用于鋼鐵、冶煉、電廠、焦化廠、航空、冶金機械、石油、化工等高溫工業中,額定電壓450/750V及以下的控制及監控回路中。它具有優良的耐高溫、阻燃、耐輻射、耐老化、耐臭氧、防水等特性,同時具有很好的耐寒性、耐候性。It is widely used for supervising and controlling return cir

31、cuit of rated voltage 450/750V or lower for production under high temperature in the eld of steel & iron, re n-ery, power plant, coking plant, aviation, metallurgy, ma-chinery, petrochemical industry etc. It has good feature of high temperature resistance, ame retardance, radiation resistance, a

32、ging resistance, ozone resistance, water proof, freezing resistance and weather resistance.一、生產執行標準采用企業標準。Executive standard: enterprise standard二、使用條件Working Condition1、交流額定電壓U0/U:450/750V ;2、電纜的敷設溫度應不低于-20 ;3、電纜允許工作溫度范圍:-60+180,推薦彎曲半徑不小于電纜外徑的6倍,有銅帶屏蔽結構的電纜其彎曲半徑不小于電纜外徑的10倍;4、有優良的耐臭氧老化、熱老化、紫外光老化和大氣老化

33、性能;5、電絕緣性能好,耐電暈和抗電弧性很優越;1: A.C rated voltage UO/U: 450/750V2: Temperature for installing is no lower than -20.3: Working temperature allowed by cable is -60+180. Recommended bending radius is no less than 6 times that of cable OD and 10 times that of cable OD for cable with copper tape shielding.4:

34、It has good features of ozone aging resistance, thermal aging resistance, ultraviolet resistance and atmo-sphere aging resistance.5: Good performance of electric insulation, corona resistance and arc resistance.三、型號名稱及主要使用范圍如表1 Type, description and main applicationoccasion listed in the following t

35、able 1Table 1四、電纜規格如下表所示 Cable structure as follows五、技術參數 TechnicalParameter1、成品電纜絕緣線芯的絕緣電阻:換算到電纜長度為1km、溫度為20時應不小于50M。2、成品電纜應經受工頻交流3000V/5min電壓試驗,絕緣不擊穿。1: Insulated resistance of finished cable insulated conductor will be no less than 50M under the condition that cable length is 1km and temperature

36、is 20.2: Finished cable shall bear AC voltage test of 3000V under power frequency for 5 minutes without puncture of insulation.六、交貨要求 DeliveryLength允許根據雙方協議長度交貨;長度計量誤差不超過±0.5%。Delivery length of cable depends on the both agreement with length error allowance of ±0.5%低煙低鹵阻燃控制電纜Control Cable

37、 with Low smoke, Low halogen and Flame retardant本產品適用于額定電壓450/750V及以下有低煙、低鹵阻燃要求作為控制監控回路等場合使用。It is used for supervising and controlling return circuit of rated voltage 450/750V or lower with demand on low smoke, low halogen and ame retardance.一、生產執行標準:采用企業標準及參照GB9330-88。Executive standard:enterprise

38、 standard and GB9330-88 standard for reference二、使用特性Working Condition1、額定電壓:UO/U為450/750V。2、電纜長期允許工作溫度70。3、電纜敷設溫度應不低于0,推薦彎曲半徑:有鎧裝和銅帶屏蔽結構的電纜:其彎曲半徑不小于電纜外徑的12倍;其它結構的電纜:其彎曲半徑不小于電纜外徑的6倍。1: Rated voltage: 450/750V2:Long-term working temperature allowed by cable is 70.3: Ambient temperature for installing

39、cable shall be no lower than 0.Recommended bending radius:It shall be no less than 12 times that of cable O.D for armored cable with copper tape shielding structure and 6 times that of cable O.D for cable with other structure.三、電纜的型號名稱Type and Description1、電纜型號名稱如表1 :Type and Description in table 1

40、Table 1注:型號中DDZ表示低煙低鹵阻燃型。Remark: DDZ means low smoke & halogen, ame retardant2、主要名詞術語解釋 Explanation of Main Noun Term低煙:在規定試驗條件下,試樣受熱分解或燃燒釋放出的煙比較少,符合規定的指標特性。低鹵:在規定試驗條件下,試樣燃燒時放出的鹵化氫氣體的含量比較少,符合規定指標的特性。阻燃:在一定的試驗條件下,試樣被燃燒,在撤去火源后,火焰的蔓延僅在規定的范圍內,殘焰或殘灼在規定的時間內能自行熄滅的特性。Low smoke: under stipulated testing

41、conditions, smoke out of decomposition with heat or emission in ring is less, which conforms to stipulated indices.Low halogen: under stipulated testing conditions, HCI content of smoke emitted in ring is less which conforms to stipulated indices.Flame retardant: under stipulated testing conditions,

42、 the tested sample is fired. After removing from source, ame spreads within stimulated range, remnant ame will go out on itself within stipulated time.四、電纜規格范圍如表2:Speci cation Scope in Table 2 Table 2五、主要技術指標Main Technical Indices1、低煙低鹵阻燃性能指標煙密度試驗:最小透光率40%; Hcl氣體釋放量不大于100mg/g。2、20時導體直流電阻值及耐電壓強度perfo

43、rmance indices of low smoke & halogen and ame retardanceSmoke density test: min. light-penetration ratio is 40%.Hcl emission value shall be no more than 100mg/g.Conductor DC resistance value & voltage withstand stress at 20 3、電纜的外形尺寸參照聚氯乙烯絕緣和護套控制電纜。External Dimension of CablePlease refer to

44、control cable with PVC insulation and sheath六、交貨長度 Deliverylength根據雙方協議允許任何長度交貨;長度計量誤差不超過±0.5%。Delivery length of cable depends on both agree-ments with length error allowance of ±0.5%一、生產執行標準采用企業標準及參照GB9330-88、GB/T12706-2002。Executive standard:Use enterprise standard or refer to GB9330-88

45、、GB/T12706-2002 standard.二、使用特性三、電纜的型號名稱無鹵低煙阻燃、耐火電纜Low Smoke No Halogen Flame Retardant Fire Resistant Cable本產品適用于額定電壓600/1000V 及以下低煙無鹵要求的電力系統或控制及監控回路中。The product is used for controlling and supervising return circuit or power system with requirement of rated voltage 600/1000V or lower, low smoke a

46、nd no halogen.Working condition1、 電纜長期允許工作溫度90。2、 電纜敷設溫度應不低于0,推薦彎曲半徑:無鹵阻燃控制電纜:有鎧裝和銅帶屏蔽結構的電纜:其彎曲半徑不小于電纜外徑的12倍;其它結構電纜:其彎曲半徑不小于電纜外徑的6倍。無鹵阻燃電力電纜:單芯電纜:其彎曲半徑不小于電纜外徑的20倍;多芯電纜:其彎曲半徑不小于電纜外徑的15倍。Long-term working temperature of cable is 90.Cable installation temperature is no less than 0. Recommended bending

47、radius is as following:No halogen ame retardant control cable:Bending radius is no less than 12 times that of cable outer diameter for cable with structure of armoring and copper tape shielding.Bending radius is no less than 6 times that of cable outer diameter for cable with other structure.No halo

48、gen ame retardant power cable:Bending radius is no less than 20 times that of cable outer diameter for cable with single coreBending radius is no less than 15 times that of cable outer diameter for cable with multi cores.cable type & name1、電纜的型號名稱如下表 cable type & name as following: 2、主要名詞術語解

49、釋低煙:在規定試驗條件下,試樣受熱分解或燃燒釋放出的煙比較少,符合規定指標的特性。無鹵:在規定試驗條件下,試樣燃燒時放出的鹵化氫氣體的含量極少,符合規定指標的特性。阻燃:在一定的試驗條件下,試樣被燃燒,在撤去火源后,火焰的蔓延僅在規定的范圍內,殘焰或殘灼在規定的時間內能自行熄滅的特性。de nition of main noun glossaryLow smoke: cable sample discharges little smoke when be heated or be burn under stipulated test condi-tion, meeting the requir

50、ement of stipulated target.No halogen: cable sample discharges little hydrogen halogen gas when being burn under stipulated test condi-tion, meeting the requirement of stipulated target.Flame retardant: under certain test condition, cable sample is burn. When fire resource is withdrawn, spark spread

51、ing is controlled within stipulated range. Remnant spark or burning can put out by itself within stipulated time.四、電纜的規格如下表所示cable speci cation as followings:五、主要技術指標main technical parameter1、導體直流電阻符合GB/T3956的規定。2、90絕緣電阻常數不小于3.67M.km,體積電阻率不小于1012.Cm。3、電纜均應經受3.5kV交流電壓試驗,5min絕緣不擊穿。4、無鹵低煙阻燃性能指標:Conduct

52、or DC resistance is in accordance with GB/ T3956 standard.Insulated resistance constant is no less than 3.67M.km at 90. Volume resistance ratio is no less than 1012.Cm.Cable shall endure 3.5kv A.C. voltage test for 5 min-utes without puncture.performance target of no halogen, low smoke and ame retar

53、dant六、交貨長度delivery length允許根據雙方協議長度交貨,長度計量誤差不超過±0.5%。Delivery length depends on both agreement with length error no more than ±0.5%.耐火電纜Fire Resistant Cable本產品適用于高層建筑、油田、電站、電廠、礦山、化工、地鐵等要求防火條件高的場合,也時應急電源、消防泵、電梯通訊信號系統的應備電纜。該產品具有較高的耐火能力,在經受火焰直接燃燒情況下,在一定的時間內(不小于3h不發生短路和斷路故障,確保繼續供電以維持照明和傳輸信號,保護

54、人員有足夠的時間安全撤離,且有利于滅火和減少損失。It is used in the environment with high demand on re resistant performance such as high-rise building, oil eld, power station, power plant, mine, chemical industry, subway and so on. It is also necessary cable prepared for emergency power, fire-flight pump and communica-tion

55、 system for elevator. In time of being directly red by flame, it could endure continually supplying power and transmitted signal to keep lighting within certain time (no less than 3 hours for people to retreat safely and also to bene t ghting re to lower damage.一、生產執行標準采用企業標準Executive standard: ente

56、rprise standard二、使用條件Working Condition1、交流額定電壓:U0/U(V系列:600/1000V,K系列: 450/750V,B系列450/750V。2、電纜最高長期工作溫度阻燃聚氯乙烯絕緣及護套:70和105兩種;交聯聚乙烯絕緣:90;。3、電纜安裝敷設溫度應不低于0。4、敷設推薦的允許彎曲半徑:電力電纜:單芯電纜40D;多芯電纜30D?？刂齐娎|:12D。B系列塑料電線:4D(D<25mm時;6D(D25mm時。1: AC rated voltage: U0/U(V series:600/1000V; K series:450/750V; Bserie

57、s450/750V2: Max temperature of long term working is 70&105 for ame retardant cable with PVC insulation and 90 for cable with XLPE insulation.3: Temperature for installation is no lower than 0.4: Recommended bending radius for installing: 40D for power cable with single core; 30D for power cable with multi-core; 12D for control cable.B series plastic wire: 4D(D<25mmw;6D(D25mmNote: D means outer diameter三、基本型號、名稱如表1 Type and Description in Table 1 四、規格范圍如表2 Speci c