愛立信LTE_KPI優化介紹

1、LTE_KPI分類接入性保持性移動性完整性可用性利用率業務量LTE KPILTE_KPI常用統計分類分類 解釋解釋推薦推薦KPI 用戶影響用戶影響 接入性滿足用戶業務需求的能力業務接入成功率高 保持性 為用戶提供持續服務的能力業務掉線率 高 完整性 為客戶提供預期服務質量的能力上下行用戶平均吞吐率高 移動性切換性能系統內切換成功率高 可用率設備可用性小區退服時長高利用率業務、負荷、資源使用忙時PRB平均利用率中業務量容量及業務承載上下行空口流量中LTE_KPI指標定義指標名稱指標名稱中文映射算法中文映射算法英文映射算法英文映射算法下行吞吐率小區下行平均吞吐率 100*pmPdcpVolDlDr

2、b/900上行吞吐率小區上行平均吞吐率 100*pmPdcpVolUlDrb/900RRC連接建立成功率RRC連接建立成功次數/ RRC連接建立請求次數*100%EutrancellTDD:pmRrcConnEstabSucc/EutrancellTDD:pmRrcConnEstabAtt*100%E-RAB建立成功率E-RAB建立成功數/E-RAB建立請求數*100%(EutrancellTDD:pmErabEstabSuccInit+EutrancellTDD:pmErabEstabSuccAdded)/（EutrancellTDD:pmErabEstabAttInit+Eutrancel

3、lTDD:pmErabEstabAttAdded）*100%無線接通率E-RAB建立成功數/E-RAB建立請求數*RRC連接建立成功次數/ RRC連接建立請求次數*100%(EutrancellTDD:pmErabEstabSuccInit+EutrancellTDD:pmErabEstabSuccAdded)/（EutrancellTDD:pmErabEstabAttInit+EutrancellTDD:pmErabEstabAttAdded）*EutrancellTDD:pmRrcConnEstabSucc/EutrancellTDD:pmRrcConnEstabAtt*100%會話建立成

4、功率RRC、S1、E-RAB建立成功率乘積 100*(pmRrcConnEstabSucc/pmRrcConnEstabAtt) * (pmS1SigConnEstabSucc/pmS1SigConnEstabAtt) * (pmErabEstabSuccInit + pmErabEstabSuccAdded)/(pmErabEstabAttInit + pmErabEstabAttAdded)無線掉線率（eNB請求釋放上下文數-正常的eNB請求釋放上下文數）/初始上下文建立成功次數*100% (EutranCellTDD:pmUeCtxtRelNormalEnb+EutranCellTDD:

5、pmUeCtxtRelAbnormalEnb-EutranCellTDD:pmUeCtxtRelNormalEnb)/EutranCellTDD:pmUeCtxtEstabSucc*100%E-RAB掉線率( eNB請求釋放的E-RAB數 -正常的eNB請求釋放的E-RAB數 +切出失敗的E-RAB數 )/E-RAB建立成功數， 其中代表將本地網范圍內的各個小區的統計結果累加。pmErabRelNormalEnb+pmErabRelAbnormalEnb-pmErabRelNormalEnb+Sum(pmHoPrepAttLteInterFQci+ pmHoPrepAttLteIntraFQc

6、i)-Sum(pmHoPrepSuccLteInterFQci-pmHoPrepSuccLteIntraFQci)/(EutrancellTDD:pmErabEstabSuccInit+EutrancellTDD:pmErabEstabSuccAdded）切換成功率（eNB間S1切換出成功次數+ eNB間X2切換出成功次數+ eNB內切換出成功次數）/（eNB間S1切換出請求次數+ eNB間X2切換出請求次數+ eNB內切換出請求次數）*100%EutranCellTDD:pmHoExecOutS1SuccInterEnb+EutranCellTDD:pmHoExecOutX2SuccInte

7、rEnb+Sum(EutrancellRelation:pmHOExeSuccLteIntraF+EutrancellRelation:pmHOExeSuccLteInterF)/EutranCellTDD:pmHoPrepOutS1AttInterEnb+The previous mapping:EutranCellTDD:pmHoExecOutX2AttInterEnbThe new mapping:pmHoPrepOutX2AttInterEnb+EUtranCellRelation:pmHoExeAttLteIntraF(intra eNB)+EUtranCellRelation:pm

8、HoExeAttLteInterF(intra eNB)*100%系統內切換成功率LTE系統內切換成功率 100*(pmHoExeSuccLteInterF+pmHoExeSuccLteIntraF)/(pmHoPrepAttLteInterF+pmHoPrepAttLteIntraF)上行業務信息PRB占用率上行業務信道占用PRB平均數/小區PRB數*100%。EutrancellTDD:pmPrbUsedUlDtch/ULSubframeTotalNum/100*100%下行業務信息PRB占用率下行業務信道占用PRB平均數/小區PRB數*100%。sum(EutrancellTDD:pmP

9、rbUsedDlDtchFirstTransQci) * (1+EutrancellTDD:pmPrbUsedDlReTrans/EutrancellTDD:pmPrbUsedDlFirstTrans)/DLSubframeTotalNum/小區PRB數*100%設備板卡CPU負荷 設備處理板卡負荷 pmProcessorLoadSum尋呼成功率尋呼消息發送成功次數/尋呼消息發送次數100*(pmPagReceived - pmPagDiscarded)/pmPagReceived 小區可用率可用小區占比 100*(1-pmCellDowntimeAuto)/900用戶會話時長用戶會話平均時長

10、 pmSessionTimeUe下行活動用戶數下行活動用戶數pmActiveUeDlSum上行活動用戶數上行活動用戶數pmActiveUeUlSum下行物理資源占用率 下行物理資源占用率(pmPrbUsedDlDtch+pmPrbUsedDlSrb)/DLSubframeTotalNum上行物理資源占用率 上行物理資源占用率(pmPrbUsedUlDtch+pmPrbUsedUlSrb)/ULSubframeTotalNumCSFB成功率CSFB成功率(pmTotNoRrcConnReqCsfbIndSucc/(pmTotNoRrcConnReqCsfbInd-pmNoLoadSharingR

11、rcConnCsfbInd)*(pmNoNormalNasSignRelCsfbInd/(pmNoNormalNasSignRelCsfbInd+pmNoSystemNasSignRelCsfbInd)*(pmNoRabEstSuccCsfbInd+pmNoRabEstSuccCsfbDetect)/(pmNoRabEstAttCsfbInd+pmNoRabEstAttCsfbDetect)上行干擾 UL_Interfrence上行平均干擾值算出PDF Counter: pmRadioRecInterferencePwr它的加權平均值。UL_Interfrence=Total_Interfer

12、ence_Power/pmRadioRecInterferencePwr_value;Total_Interference_Power=pmRadioRecInterferencePwrWhere(Vector Index=0)*-121+pmRadioRecInterferencePwrWhere(Vector Index=1)*-120.5+pmRadioRecInterferencePwrWhere(Vector Index=2)*-119.5+pmRadioRecInterferencePwrWhere(Vector Index=3)*-118.5+pmRadioRecInterfer

13、encePwrWhere(Vector Index=4)*-117.5+pmRadioRecInterferencePwrWhere(Vector Index=5)*-116.5+pmRadioRecInterferencePwrWhere(Vector Index=6)*-115.5+pmRadioRecInterferencePwrWhere(Vector Index=7)*-114.5+pmRadioRecInterferencePwrWhere(Vector Index=8)*-113.5+pmRadioRecInterferencePwrWhere(Vector Index=9)*-

14、112.5+pmRadioRecInterferencePwrWhere(Vector Index=10)*-110+pmRadioRecInterferencePwrWhere(Vector Index=11)*-106+pmRadioRecInterferencePwrWhere(Vector Index=12)*-102+pmRadioRecInterferencePwrWhere(Vector Index=13)*-98+pmRadioRecInterferencePwrWhere(Vector Index=14)*-94+pmRadioRecInterferencePwrWhere(

15、Vector Index=15)*-92pmRadioRecInterferencePwr_value=pmRadioRecInterferencePwrWhere(Vector Index=0)+pmRadioRecInterferencePwrWhere(Vector Index=1)+pmRadioRecInterferencePwrWhere(Vector Index=2)+pmRadioRecInterferencePwrWhere(Vector Index=3)+pmRadioRecInterferencePwrWhere(Vector Index=4)+pmRadioRecInt

16、erferencePwrWhere(Vector Index=5)+pmRadioRecInterferencePwrWhere(Vector Index=6)+pmRadioRecInterferencePwrWhere(Vector Index=7)+pmRadioRecInterferencePwrWhere(Vector Index=8)+pmRadioRecInterferencePwrWhere(Vector Index=9)+pmRadioRecInterferencePwrWhere(Vector Index=10)+pmRadioRecInterferencePwrWhere

17、(Vector Index=11)+pmRadioRecInterferencePwrWhere(Vector Index=12)+pmRadioRecInterferencePwrWhere(Vector Index=13)+pmRadioRecInterferencePwrWhere(Vector Index=14)+pmRadioRecInterferencePwrWhere(Vector Index=15)LTE_KPI關鍵指標解釋-接入性無線接通率無線接通率pmRrcConnEstabSucc: The total number of successful RRC Connectio

18、n Establishments.pmRrcConnEstabAtt: The total number of RRC Connection Request attempts.pmRrcConnEstabAttReatt: The total number of RRC Connection Request attempts that are considered as re-attempts.pmErabEstabSuccInit: The total number of successful initial E-RAB Establishments.pmErabEstabSuccAdded

19、: The total number of successfully added E-RABs. pmErabEstabAttInit: The total number of initial E-RAB Establishment attempts.pmErabEstabAttAdded: The total number of added E-RAB Establishment attempts.RRC連接建立請求ERAB建立成功RRC連接建立完成ERAB建立請求UEENBMMERRC建立流程開始：流程開始：RRC嘗試：RRC Connection Request流程結束：流程結束：成功：

20、RRC Connection Setup失?。篟RC Connection Request Rejected設備故障設備故障：優化手段：加大對全網設備故障、傳輸故障告警監控及故障的排查力度；終端問題：終端問題：優化手段：通過信令采集等手段對比TOP終端性能；空口信號質量：空口信號質量：優化手段：通過天饋優化、覆蓋優化、提升RSRP、SINR等；網絡容量：網絡容量：優化手段：調整小區下最大接入用戶；參數設置：參數設置：優化手段：通過優化最小接收電平、小區選擇參數、小區重選參數、4-3重選參數、鄰區核查等手段提升；網內網外干擾：網內網外干擾：優化手段：網外干擾：如CDMA、WCDMA、TDS等干擾

21、，通過掃頻確定干擾，提升與TDL間離度等手段來盡量避免干擾；政府會議、學校考試等放置干擾器，則采取鎖小區等手段來降低對指標的影響；網內干擾：核查PCI，減少因PCI MOD3、MOD6干擾導致的RRC建立失??；室內外優化：室內外優化：優化手段：通過路測等手段檢查室分泄漏，降低因室分泄漏導致的乒乓重選或干擾導致的RRC建立失敗。影響RRC建立指標因素及優化思路E-RABE-RAB建立建立流程開始：流程開始：嘗試 ：ERAB建立請求nitial Context Setup Request）流程結束：流程結束：成功：RBS向MME發送Initial Context Setup Response設備故

22、障設備故障：優化手段：加大對全網設備故障、傳輸故障告警監控及故障的排查力度；終端問題：終端問題：優化手段：通過信令采集等手段對比TOP終端性能；空口信號質量：空口信號質量：優化手段：通過天饋優化、覆蓋優化、提升RSRP、SINR等；參數參數設置：設置：優化手段：通過調整3-4重定向、4-4G宏站-室分重選參數、4-3G重選參數、4-3G重定向參數，核查修改PCI等；網網內網外干擾：內網外干擾：優化手段：網外干擾：如CDMA、WCDMA、TDS等干擾，通過掃頻確定干擾，提升與TDL間離度等手段來盡量避免干擾；政府會議、學校考試等放置干擾器，則采取鎖小區等手段來降低對指標的影響；網內干擾：核查PC

23、I，減少因PCI MOD3、MOD6干擾導致的RAB建立失??；室內外優化：室內外優化：優化手段：通過路測等手段檢查室分泄漏，降低因室分泄漏導致的乒乓重選或干擾導致的RAB建立失敗。影響E-RAB建立指標因素及優化思路流程結束：成功：在S1邏輯信道上收到消息，如：S1 initial context setup request 流程開始：嘗試 ：Initial UE ( RBS Message)LTE_KPI關鍵指標解釋-保持性E-RAB掉掉線線率率pmErabRelAbnormalEnbAct: The total number of abnormal E-RAB Releases per c

24、ell initiated by the eNB and that there was data in either the UL or DL buffer (i.e. active).pmErabRelAbnormalMmeAct: The total number of E-RAB Releases initiated by the MME considered as abnormal.pmErabRelAbnormalEnb: The total number of abnormal E-RAB Releases triggered by eNB per cell.pmErabRelNo

25、rmalEnb: The total number of normal E-RAB Releases triggered by eNB per cell.pmErabRelMme: The total number of E-RAB Releases per cell initiated by the MME excluding successful handover.E-RAB Release Procedure MME Initiated在在BufferBuffer中有數據的非正常釋放，才是用戶感知的掉話中有數據的非正常釋放，才是用戶感知的掉話E-RAB Release Procedure

26、 eNB Initiated無線無線掉線掉線率率無線掉線率：（eNB請求釋放上下文數-正常的eNB請求釋放上下文數）/初始上下文建立成功次數*100% =(pmUeCtxtRelNormalEnb+pmUeCtxtRelAbnormalEnb-pmUeCtxtRelNormalEnb)/pmUeCtxtEstabSucc*100%該指標指示了UE CONTEXT異常釋放的比例。異常請求釋放上下文數通過UE CONTEXT RELEASE REQUEST中包含異常原因的消息個數統計；初始上下文建立成功次數通過包含建立成功信息的Initial Context Setup Response消息個數。

27、設備故障：設備故障：優化手段：加大對全網設備故障、傳輸故障告警監控及故障的排查力度；終端問題：終端問題：優化手段：通過信令采集等手段對比TOP終端性能；空口信號質量：空口信號質量：優化手段：通過天饋優化、覆蓋優化、提升RSRP、SINR等減少因無線環境等因素造成的掉線；擁塞：擁塞：優化手段：調整最小接入電平、調整小區下最大用戶數、擴容等手段來提升；參數設置：參數設置：優化手段：小區選擇、小區重選、UE定時器等參數優化調整；MOD3MOD3、MOD6MOD6干擾優化：干擾優化：優化手段：核查PCI，避免PCI對打，鄰區中有相同PCI等；影響無線掉線率指標因素及優化思路下行用戶速率下行用戶速率DL

28、UT（Downlink User Throughput ）KPI計算公式pmPdcpVolDlDrb: 下行方向上總的DRB的流量 Unit: 1 kilobit (1 000 bits)pmPdcpVolDlDrbLastTTI: buffer為空前的最后一個TTI上DRB的流量 Unit: 1 kilobit (1 000 bits)pmUeThpTimeDl: 下行有效的傳輸時間，從buffer里第一個PDCP SDU在Uu口上發送到最后buffer為空為止，其中去除buffer為空前的一個TTI. Unit: 1 msNote：我們?cè)诮y(tǒng)計下行用戶速率的過程中，從空口的第一個包調度，到用

29、戶的最后一個數據調度完成，將去除尾包數據量和時間。上行也同樣如此。統計原則統計原則KPI上行用戶速率上行用戶速率ULUT（Uplink User Throughput ）KPI計算公式pmUeThpVolUl:上行方向上總的DRB的流量 Unit: 1 kilobit (1 000 bits)pmUeThpTimeUl: 上行有效傳輸時間Unit: 1 ms統計原則統計原則KPI系統內切換成功率系統內切換成功率HOSR（Intra-LTE Handover Success Rate ）KPI計算公式同頻切換異頻切換同頻切換設備故障：設備故障：優化手段：加大對全網設備故障、傳輸故障告警監控及故障

30、的排查力度；終端問題：終端問題：優化手段：通過信令采集等手段對比TOP終端性能；空口信號質量：空口信號質量：優化手段：通過天饋優化、覆蓋優化、提升RSRP、SINR，梳理切換關系等；參數核查：參數核查：優化手段：同過優化同頻、異頻切換測量、切換判決參數、小區下最小接入電平等參數；鄰區優化：鄰區優化：優化手段：定期核查X2告警，冗余鄰區，對切換基數較小但失敗分子較多鄰區進行增刪，或者禁止切換，核查鄰區中是否有同PCI鄰區等；CIOCIO、A3A3、A5A5觸發定時器、遲滯等參數精細化調整：觸發定時器、遲滯等參數精細化調整：優化手段：根據道路測試、場景對CIO、A3、A5事件定時器等參數進行精細化

31、調整；網內外干擾：網內外干擾：優化手段：網外干擾：如CDMA、WCDMA、TDS等干擾，通過掃頻確定干擾，提升與TDL間離度等手段來盡量避免干擾；政府會議、學?？荚嚨确胖酶蓴_器，則采取鎖小區等手段來降低對指標的影響；網內干擾：核查PCI，減少因PCI MOD3、MOD6干擾導致的切換失敗等；室內外優化：室內外優化：優化手段：根據室分場景進行室內外切換測量、判決、觸發時延等參數進行精細化調整。影響切換成功率指標因素及優化思路到到WCDMA的系統間切換成功率的系統間切換成功率IRAT-HOSR-3GKPI計算公式The Intra LTE HO Success rate (HOSR)Intra L

32、TE HO Success rate (HOSR) is defined as the number of successful intra LTE handover attempts divided by the total number of intra LTE handover attempts.It is the probability of successfully initiating and completing a handover to another cell in the LTE network which is centred on the same carrier f

33、requency. 小區完好率Cell Availability (CA)KPI計算公式計數器： CellDowntimeMan 由于下列因素小區關閉時長：- 小區狀態人工設置為關閉- 維護需要，臨時關閉小區CellDowntimeAuto 由于故障，造成小區狀態處于關閉的時長注：不包括小區啟動N:小區數目L:為統計區間ROP數量System Load Downlink Volume Uplink Volume Active UEs Average number of simultaneous E-RABs UE Session TimePhysical Resources PRB utili

34、zationProcessor Load MP LoadDownlink VolumePIUplink VolumePI計數器pmPdcpVolDlDrbUnit: 1 kilobit (1 000 bits)The total volume (PDCP SDU) on Data Radio Bearers that has been transmitted in the downlink direction in the PDCP layer.pmPdcpVolDlSrb Unit: 1 kilobit (1 000 bits)The total volume (PDCP SDU) on S

35、ignaling Radio Bearers that has been transmitted in the downlink direction in the PDCP layer.計數器pmPdcpVolUlDrb Unit: 1 kilobit (1 000 bits)The total volume (PDCP SDU) on Data Radio Bearers that has been received in the uplink direction.pmPdcpVolUlSrbUnit: 1 kilobit (1 000 bits)The total number of bi

36、ts (PDCP SDU) on Signaling Radio Bearers that has been transferred (acknowledged by the RBS) in the uplink direction.Number of Active UsersPI計數器：pmActiveUeDlSum：Number of UEs with DRB data to send in the downlink direction.Aggregates for each TTIpmActiveUeUlSum：Number of UEs with buffer status repor

37、tsindicating DRB data to be sent in the uplink direction.Aggregates for each TTIAverage number of simultaneous E-RABspmErabLevSumpmErabLevSum Sampling rate: 5 secondspmErabLevSamppmErabLevSamp Sampling rate: 5 seconds計數器：pmErabLevSum Sum of all sample values recorded for Number of simultaneous E-RAB

38、spmErabLevSamp Counts the number of times the corresponding Sum counters has been incremented.Session TimePI計數器：pmSessionTimeUe： Unit: 1 sNumber of session seconds aggregated for UEs in a cell.A UE is said to be “in session” if any data on a DRB (UL or DL)has been transferred during the last 100 msp

39、mSessionTimeDrb：Unit: 1 sNumber of session seconds aggregated for DRBs in a cell.A DRB is said to be “in session” if any data on a DRB (UL or DL)has been transferred during the last 100 msPRB UtilizationPI計數器：pmPrbUtilDl：PDFA distribution that shows the downlink Physical Resource Block (PRB) pair ut

40、ilization (total number of used PRB pairs by available PRB pairs) on the Physical Downlink Shared Channel (PDSCH). pmPrbUtilUl：PDFA distribution that shows the uplink Physical Resource Block (PRB) pair utilization (total number of used PRB pairs by available PRB pairs) on the Physical Uplink Shared

41、Channel (PUSCH). Mp Load DistributionPIpmProcessorLoadDistrpmProcessorLoadDistr PDF ranges:0: 0 = Cpu Load 20 %1: 20 = Cpu Load 30 %2: 30 = Cpu Load 40 %3: 40 = Cpu Load 50 %4: 50 = Cpu Load 60 %5: 60 = Cpu Load 70 %6: 70 = Cpu Load 80 %7: 80 = Cpu Load 85 %8: 85 = Cpu Load 90 %9: 90 = Cpu Load 95 %

42、10:95 70% 調整PdcchCfiMode參數增加帶寬增加新站PUCCH資源利用率未調度的PUCCH分配請求比率(%)10% 參數優化及一致性檢查添加新站PRB資源利用率 忙時PRB平均利用率60% 降低激活用戶數：業務均衡，新站建設 如果有可能，減低控制信道資源如果有可能，增加系統帶寬licenselicense資源資源RRC連接用戶數實際連接用戶數峰值/license用戶數70% 通過硬件升級，增加連接用戶數容量增加連接用戶數的license減少連接的用戶數，可以通過業務均衡，新站建設等設備資源設備資源基帶板CPU利用率 基帶板負荷70% 目前的硬件配置不會出現主處理器負荷過高問題

43、Paging資源利用率 尋呼丟棄率5%對尋呼參數的一致性檢查（發送尋呼的數量以及計時器等）TA list的優化傳傳輸資源輸資源 以太網口利用率 忙時傳輸利用率70%傳輸帶寬擴容 預警門限：連接峰值用戶數/License用戶數70%硬件DUS 41，單站最大3600個用戶軟件license目前配置S111單站120，以20為步長升級參數名稱參數解釋licenseCapacityConnectedUsersRRC連接用戶數的license限制數licConnectedUsersPercentileConfpmLicConnectedUsersActual的CDF取值統計名稱統計解釋pmLicCon

44、nectedUsersLicense可用的連接用戶數license數pmLicConnectedUsersActual在一個測量周期內實際連接用戶比率pmLicConnectedUsersMax連接的峰值用戶數pmLicConnectedUsersTimeCong連接的用戶數達到license限制的累加時間pmRrcConnEstabFailLic因?yàn)槿鄙賚icense造成的RRC連接建立失敗次數愛立信LTE容量評估-RRC連接用戶數 增加連接用戶容量： 硬件升級；增加連接用戶license個數 減少連接的用戶數： 業務均衡；新站3939計數器:pmLicConnectedUsersActua

45、預警門限：不會出現容量限制硬件DUS 41，愛立信基帶板的PRACH處理能力充足，遠超實際可能發生的PRACH業務量軟件無限制參數名稱參數解釋cellRange小區最大半徑rachRootSequence隨機接入前導序列cfraEnable非競爭隨機接入開啟愛立信LTE容量評估-PRACH 對功控參數設置的檢查 對問題站進行上行干擾排查預警門限：pmPdcchCceUtil大于70%可用容量軟硬件無限制帶寬20M帶寬，PDCCH占三個符號時最多可用CCE數為84/子幀。目前采用動態cfi設置，PDCCH最多占3個符號參數名稱參數解釋pdcchCfiMode控制CFI，目前使用最大值為3的動態調

46、整方式統計名稱統計解釋pmPdcchCceUtilPDCCH CCE利用率pmContDlPdcch下行由于缺乏PDCCH資源而產生的競爭的次數pmContUlPdcch上行由于缺乏PDCCH資源而產生的競爭的次數pmPdcchCceActivityPDCCH占用1個或多個CCE的次數pmPdcchMaxCceAvail考慮天線和帶寬的條件下，CCE可用的總個數愛立信LTE容量評估-PDCCH 調整PdcchCfiMode參數 增加帶寬 增加新站預警門限：未調度的PUCCH分配請求比率(%)=SR和CQI未調度的次數/請求次數10%軟件無限制硬件DUS41 ，20M帶寬，最大SR用戶810，C

47、QI用戶880參數名稱參數解釋noOfPucchSrUsersPUCCH上可用的SR資源的個數，目前設置160noOfPucchCqiUsersPUCCH上可用的CQI資源的個數，目前設置160統計名稱統計解釋pmPucchSrCqiResAllocAttPUCCH分配的嘗試次數pmPucchSrCqiResCongCqiCQI資源請求未被調度的次數pmPucchSrCqiResCongSrSR資源請求未被調度的次數愛立信LTE容量評估-PUCCH 功率參數設置的一致性檢查 優化NoOfPucchCqiUsers, NoOfPucchSrUsers 添加新站愛立信LTE容量評估-PRB資源硬件

48、無限制RB數20M帶寬，100RBcounter名稱解釋pmPrbUtilDl (PDF)下行PRB利用率PDF分布pmPrbUtilUl (PDF)上行PRB利用率PDF分布預警門限：忙時PRB平均利用率60%，結合單用戶下載速率*建議結合小區內平均每用戶的throughput單用戶下行速率=測試時間內下行PDCP流量/UE下行業務占用時間單用戶上行速率=測試時間內上行PDCP流量/UE上行業務占用時間 降低激活的用戶數，比如業務均衡，建新站等 在控制信道容許的情況下，減少控制信道資源. 增加網絡帶寬eNodeB理論尋呼容量：1250 Paging / s , 尋呼丟棄率 5%硬件1250

49、Paging / s 配置目前配置600 Paging / s; 在作TA規劃時，綜合考慮各種因素后，通常按200/s規劃。基站CPU對尋呼能力的支持較大(1000/s)，通常不是瓶頸參數名稱參數解釋maxNoOfPagingRecords每PO上可承載的尋呼尋呼信息個數Nb每個尋呼幀中PO的個數pagingDiscardTimer尋呼信息緩存時長統計名稱統計解釋pmPagDiscarded尋呼丟棄次數pmPagReceived收到的尋呼次數愛立信LTE容量評估-尋呼容量 對尋呼參數的一致性檢查（發送尋呼的數量以及計時器等） TA列表的優化愛立信LTE容量評估-設備資源CPU負荷CPU負荷狀態

50、 98%過負荷 90% 98%超負荷 70% 89%高負荷 70%正常負荷統計名稱統計解釋pmProcessorLoadDistr CPU負荷分布硬件DUS41，目前的硬件配置不會出現主處理器負荷過高問題 u 基帶板基帶板CPUCPU占用率：占用率：pmProcessorLoadDistrpmProcessorLoadDistr PDF ranges:0: 0 = Cpu Load 20 %1: 20 = Cpu Load 30 %2: 30 = Cpu Load 40 %3: 40 = Cpu Load 50 %4: 50 = Cpu Load 60 %5: 60 = Cpu Load 70

51、 %6: 70 = Cpu Load 80 %7: 80 = Cpu Load 85 %8: 85 = Cpu Load 90 %9: 90 = Cpu Load 95 %10:95 70%KPI公式：以太網傳輸利用率(%) =以太網流量/統計時間/以太網配置帶寬 傳輸擴容指標名稱指標名稱主要影響哪些用戶感主要影響哪些用戶感受及網絡性能？（如受及網絡性能？（如網頁打開慢之類的）網頁打開慢之類的）主要由什么原因引起（如室分底噪是網絡主要由什么原因引起（如室分底噪是網絡元器件引起還是優化不合理？宏站底噪高元器件引起還是優化不合理？宏站底噪高呢？）呢？）當前主要有哪些優化手段提升這些指標？當前主要有

52、哪些優化手段提升這些指標？無線接通率有LTE信號，但無法上網1. 宏站底噪高2. RRC、E-RAB擁塞3. 連接用戶數限制4. 天饋系統問題5. 覆蓋問題6. 參數配置1. 排除內、外部干擾2. 擴容，業務分流3. 擴lincese4. 檢查天饋系統問題：駐波比、鴛鴦線等；5. RF優化：重疊覆蓋、弱覆蓋、過覆蓋問題解決；6. 參數優化LTE業務掉線率上網時刷不出東西，看視頻掉線1. 覆蓋干擾問題2. 天饋問題3. 鄰區缺失4. 基站故障5、參數問題1. RF優化：重疊覆蓋、弱覆蓋、過覆蓋問題解決；模3干擾解決；2. 檢查天饋系統問題：駐波比、鴛鴦線等；3. 鄰區優化；4. 檢查告警，排除基站故障5. PCI核查；LTE小區退服時長手機無信號，無LTE覆蓋1. 基站故障2. 人為閉站1. 檢查告警，排除基站故障2. 檢查人為閉站原因用戶下行吞吐率視頻卡頓，游戲卡頓1. 覆蓋問題2. 天饋問題3. 參數問題4. 容量問題1. RF優化：重疊覆蓋、弱覆蓋、過覆蓋問題解決；2. 檢查天饋系統問題3. 參數優化4. 擴容，資源優化上行底噪無法接入，上行速率低1. 系統內干擾2. 系統外干擾1.