單片機驅動步進電機程序代碼參考模板

1、/*實現功能：正轉程序使用芯片：AT89S52晶振：11.0592MHZ編譯環境：Keil作者：【聲明】此程序僅用于學習與參考，引用請注明版權和作者信息！ */#include<reg52.h> /庫文件#define uchar unsigned char/字符型宏定義#define uint unsigned int/整型宏定義uchar tcnt; /定時器計數初值定義uint sec; /速度值定義uchar buf11;uchar bai,shi,ge;/*控制位定義*/sbit shi_neng=P10; /使能控制位sbit fang_shi=P11; /工作方式控制

2、位sbit fang_xiang=P12;/旋轉方向控制位sbit mai_chong=P13; / 脈沖控制位/*延時函數*/void delay1ms(uchar z)uchar x,y;for(x=0;x<z;x+)for(y=0;y<110;y+);/*定時中斷服務函數*/void t0(void) interrupt 1 using 0 /定時中斷服務函數tcnt+; /每過250ust tcnt 加一if(tcnt=1) /當tcnt滿足條件時tcnt=0; /計滿重新再計sec+;if(sec=6) /括號內數值越小，電機轉動速度越快1 / 4sec=0; /計滿重新

3、再計mai_chong=mai_chong; /脈沖輸出/*定時器0/1初始化*/void T0_Init()ET0 = 1;TMOD = 0x22;TH0=0x06; /對TH0 TL0 賦值TL0=0x06;TR0=1; /開始定時sec=0;mai_chong=1; / 脈沖控制位/*串口初始化*/void Uart_Init()TMOD = 0x22;TH1 = 0xFD;TL1 = 0xFD;SCON = 0x50;PCON &= 0xef;TR1 = 1;/*數據接收函數*/void ReceiveBuf()int i;for(i=0;i<11;i+)bufi = S

4、BUF;while(RI = 0);RI=0;/*角度控制函數*/void Control()if(bai=buf5)&(shi=buf6)&(ge=buf7)shi_neng=0;if(bai<buf5)shi_neng=1;fang_xiang=0;else if(bai>buf5)shi_neng=1;fang_xiang=1;if(bai=buf5)&shi<buf6)shi_neng=1;fang_xiang=0;else if(bai=buf5&shi>buf6)shi_neng=1;fang_xiang=1;if(bai=buf5)&(shi=buf6&(ge<buf7)shi_neng=1;fang_xiang=0;else if(bai=buf5)&(shi=buf6)&(ge>buf7)shi_neng=1;fang_xiang=1;if(bai=buf5)&(shi=buf6)&(ge=buf7)shi_neng=0;delay1ms(3);bai=buf5;shi=buf6;ge=buf7;/*主函數*/main()EA=1;T0_Init();Uart_Init();while(1)/shi_neng=1; /