H3C三層交換機配置實例活動za

1、三層交換機配置實例網絡拓?fù)鋱D配置要求劃分并描述進入系統視圖創建并描述給設置網關的地址設置的網關設置的網關設置的網關設置的網關設置給指定端口，設置端口類型指定端口指定端口指定端口配置路由協議默認路由配置流分類定義行為應用策略接口配置策略網絡拓?fù)鋱D172.16.100.253/32192.168.100,253/32、二層交換機/172.16.100.254/32192.168.100.254/32172,16.1,254/32192,168,1.254/32172A64.0/2429N168.1.0/24圖網絡拓?fù)鋱D配置要求用戶網絡：至出口網絡：用戶網絡：至出口網絡：實現功能：用戶通過互聯網出口

2、，用戶通過互聯網出口劃分并描述進入系統視圖<>進入系統視圖<H3C>syste(n-viewSystemView:returntoUserViewwithCtl+Z.H3c口圖系統視圖創建并描述口本交換機使用口描述為口劃分口描述為“”口劃分口描述為“”口劃分口描述為“”口劃分口描述為“”H3Cvlan1IHJC-vlanldescriptionManagerH3C-vlanljquitH3Cvlan100H3C-vlanlOOjdescnptionVLAN100H3C-vlanl0GquitH3Cvlan191H3C-vlanl01descriptionVLAN101(

3、H3C-vlanim|quitH3Cvlan192H3C-vlanie2descriptionVLAN1D2H3C-vlanie2quitH3Cvlan103H3C-vlanlE)3descriptionVLAN163H3C-vlanlt>3quitH3C|圖劃分及描述給設置網關的地址設置的網關設置把的地址設置為，子網掩碼為，用于本地使用H3Cinterfacevlan-interface1H3C-VIan-Interfaxelipaddress192,168.0.254255,255.255,。EH3C-Vlati-interfacel1quit(H3C|圖的設置的網關設置把的網關設置

4、為，子網掩碼為L(zhǎng)H3CJinterfacevlan-intertaceIDGHCWlaninterfaceloeiipaddress192.16S,100,254251255,255.日HC'VlaninterfaceieeiquitK3C|圖的網關設置的網關設置把的網關設置為，子網掩碼為H3Cinterfacevlan-interface101H3C-Vlaninterfacel01ipaddress192.168.1.254255.255.255.0H3C-Vlan-interfacelDlquitH3C|圖的網關設置的網關設置把的網關設置為，子網掩碼為L(zhǎng)HdLjinTerTace

5、vLan-interrace1U2H3C-Vlan-interfaceie2ipaddress172,16.100,254255.255,255.0H3C-Vlan-interfacslG2quitH3C|圖的網關設置把的網關設置為，子網掩碼為。H3Cinterfacevlan-interface103H3C-Vlan-interfacel03)ipaddress172.16.1,254255,255,255.0H3C-Vlan-interfacelO3)quitH3C|圖的網關設置給指定端口，設置端口類型指定端口將端口指定給，并配置端口模式。fHSChntG1/0/1H3C-GigabitE

6、themetU0/lportlink-typeaccessHSC-GigabitEthernetl/O/lportaccessvlan100H3C-GigabitEthemetl./O/lspeed1006HSC-GigabitEthemet1/0/1duplexfullH3C-GigabitEthemet1/0/1quitH3C|圖指定端口指定端口將端口指定給，并配置端口模式：H3C：intGl/D/2：H3C-GigabitEthemet1/0/2portlink-typeaccess：H3C-GigabitEthernet1/0/2portaccessvlan192：H3C-Gigabi

7、tEthernetl/0/2speedJOQO'H2C-GigabitEthernetl/Q/2duplexfullH3C-GigabitEthernetl/0/2quit：H3C|圖指定端口指定端口將端口指定給，并配置端口模式H3CintG1/0/15H3C-GigabitEthernetl/G/15Jportlink-typetrunkH3C-GigabitEthemetl/0/15)porttrunkpermitvlan1101103PleasewaitDone.H3C-GigabitEthemetl/0/15jspeed1000H3C*GigabitEthernet1/0/15

8、Jduplexfull(H3CintG1/0/16H3C-Gigabit£thernetl/0/16portlink-typetrunkH3C-GigabitEthernetl/6/16porttrunkpermitvlan1101103Please艮ait.，Done.H3C-GigabitEthernetl/0/16speed1000H3C-GiqabitEthemetl/e/15duplexfull圖指定端口配置路由協議默認路由建立默認路由，將所有的數據包都丟往出口的下一節點:配置流分類配置流分類，對象為的數據:H3Caclnumber3001H3C'acl-adv-3

9、D01rule0permitipsource"2.16、L。EL&S255H3C-acl'adv-30OlquitH3Ctrafficclassifier1H3C-classifier-1if-natchacl3001H3C-classifier-1quitH3C|圖配置流分類定義行為配置剛才定義的流分類的行為，定義如果匹配就下一跳至出口即:H3Ctrafficbehavior1(H3C-behavior-lredirectnext-hop172+16100,253H3C-behaviar-11quitlH3C|圖配置流分類行為應用策略將剛才設置的應用至策略中，定義H

10、3Cqasp1H3C-qospolicy-lclas5ifier1behavior1H3C-qospolicy-lquit圖策略接口配置策略在接口上應用定義的策略H3CJintGV0/15H3C-G1gabitEthernet1/0/15qosapplypolicy1inboundHSC-GigabitEthernet1/0/15quitH3CintGl/0/16H3C-GigabitEthernetl/9/161qosapplypolicy】inbound(H3C-GigabitEthernetl/0/l&quitLH3C|圖在端口應用策略至此，配置已完成。保存配置。<><H3C>saveThecurrentconfigurationwillbewrittentothedeviceiAreyousure?Y/N：yPleaseinputthefilename(*kcfg)flash:/starTup.cfg(Toleavetheexistingfilenaineunchanged,pressth