常用英文詞匯

1、ASME常用詞匯Abrasion, allowance for 磨損，裕量Accessibility，pressure vessels 壓力容器可達性Access openings 通道孔Allowance for corrosion, erosion, or abrasion 腐蝕裕量侵蝕或/磨損裕量Applied linings, tightness 應用襯里密封性Approval of new materials, 新材料的批準Articles in Section V 第V卷中的各章Article 1, T-150 第1章T150 Article 2 第2章Attachments 附件

2、 lugs and fitting 支耳和配件 lugs for platforms, ladders, etc. 平臺，梯子等的支耳 nonpressure parts 非受壓件 nozzles 接管 pipe and nozzle necks to vessel walls 在器壁上的管子和接管頸 stiffening rings to shell 殼體上的剛性環Backing strip 墊板Bending stress, welded joints 彎曲應力，焊接接頭Bend test 彎曲試驗Blind flanges 盲板法蘭Bolted flange connections 螺栓

3、法蘭連接 bolt lands 螺栓載荷 bolt stress 螺栓應力 design of 關于設計 flange moments 法蘭力矩 flange stresses 法蘭應力 materials 材料 studs 雙頭螺栓 tightness of 緊密性 types of attachment 附件類型Bolts 螺栓Braced and stayed surfaces 支持和支撐面Brazed connections for nozzles 接管的釬焊連接Brazed joints, efficiency of 釬焊接頭，焊縫系數 maximum service tempera

4、ture 最高使用溫度 strength of 強度Brazing, cleaning of brazed surfaces 釬焊，釬焊的表面清理 fabrication by 用制造 filler metal 填充金屬 fluxes 釬焊劑 heads into shells 封頭接入殼體 operating temperature 操作溫度Buttstraps, curvature 對接蓋板，曲率 forming ends of 成型端 thickness and corrosion allowance 厚度和腐蝕裕量 welding ends of 焊接端Carbon in materi

5、al for welding 焊接用材料中的碳Cast ductile iron vessels, design 可鍛鑄鐵容器，設計 pressure-temperature limitations 壓力-溫度界限 service restrictions 使用限制Castings 鑄件 carbon steel 碳鋼 defects 缺陷 impact test 沖擊試驗 inspection 檢查 quality factor 質量系數 specifications 標準Cast iron circular dished heads 鑄鐵碟形封頭Cast iron standard par

6、ts, small 鑄鐵標準部件，小件Cast iron pipe fittings 鑄鐵管件Cast iron vessels 鑄鐵容器 corners and fillets 圓角和倒角 head design 封頭設計 hydrostatic test 水壓試驗 nozzles and fittings 接管和配件 pressure-temperatures limitations 壓力-溫度界限Certificate of Authorization for Code Symbol Stamp 規范符號標志的認可證書Certification of material 材料證明書Cert

7、ification of Nondestructive Personnel 無損檢驗人員證明書Magnetic Particle Examination 磁粉檢驗Liquid Penetrant Examination液體滲透檢驗Radiographic Examination 射線超聲檢驗Ultrasonic Examination 超聲檢驗Chip marks on integrally forged vessels 整體鍛造容器上的缺口標志Circumferential joints alignment tolerance環向連接，組對公差assembling裝配brazing釬焊ves

8、sels subjected to external pressure 承受外壓的容器Clad material, inserted strips 覆層材料，嵌條examination 檢查Clad plate 復合板Cleaning ,of brazed surfaces 釬焊表面清理of welded surfaces 焊接表面Clearance between surfaces to be brazed 釬焊表面間的間隙Combination, of different materials 不同材料組合of methods of fabrication制造方法Computed worki

9、ng pressure from hydrostatic tests 由水試驗計算的工作壓力Conical heads 錐形封頭Conical sections 圓錐截面Connections ,bolted flange (see Bolted flange connections)連接，螺栓法蘭（見螺栓法蘭連接）brazed 釬焊clamp 卡箍expanded 脹接from vessels to safety valves 由容器至安全閥studded 雙頭螺栓threaded 螺紋welded 焊接Cooling, after postweld heat treating 冷卻，焊后熱

10、處理Corrosion allowance 腐蝕裕度Corrosion resistant linings 防腐蝕襯里Corrugated shells 波紋形殼體Corrugating Paper Machinery 波紋板機械Cover plates 蓋板 on manholes and handholes 在人孔和手孔上的 spherically dished 球形封頭Cracking, stress corrosion 應力腐蝕裂縫Cutting plates 板材切割Cylindrical shells, supplementary loading 柱狀殼體，附加載荷 thickne

11、ss 厚度 transition in 過渡段Data report, guide for preparation 準備數據報告的指南Defects in welded vessels, repair 修理焊接容器中的缺陷Definitions 定義Design, brazed vessels 設計釬焊容器 carbon and low alloy steel vessels 碳鋼及低合金鋼容器 cast ductile iron vessels 可鍛鑄鐵容器 cast iron vessels 鑄鐵容器 clad vessels 覆層容器 ferritic steel vessels wit

12、h properuts enhanced by heat treatment 經熱處理后提高抗拉性能的鐵素體鋼容器forged vessels 鍛造容器 high-alloy steel vessels 高合金鋼容器 loadings 載荷 multichamber vessels 多受壓室容器 nonferrous vessels 非鐵金屬容器 welded vessels 焊接容器 design pressure 設計壓力Diameter exemption 直徑的豁免Dimensions, checking of 尺寸，校核Discharge of safety valves 安全閥泄放

13、Dished heads (see formed heads) 碟形封頭(見成形封頭)Disks, rupture 防爆膜Dissimilar weld metal 不同金屬的焊接Distortion, of welded vessels 大變形、焊接容器 supports to prevent 用支撐防止Drainage, discharge from safety and relief valves 排放，由安全閥和泄壓閥泄放Drop weight tests 落錘試驗Eccentricity of shells 殼體的偏心度 Edges of plates, metal removal

14、from 由加工板邊去除金屬 tapered 錐度Efficiency, around openings for welded attachments 焊縫系數，環繞焊接附件孔口Elasticity, modulus of 彈性模量Electric resistance welding 電阻焊Ellipsoidal heads 橢圓封頭Erosion, allowance for 侵蝕裕量Etching, of sectioned speciments 侵蝕，關于截面試樣 solutions for examination for materials 檢驗材料的溶液Evaporators 蒸發

15、器Examination, of sectioned speciments 剖面試樣的檢驗 of welded joints 焊接接頭的檢驗Exemptions diameter and volume 直徑和容積的豁免Expanded connections 脹接連接External pressure, tube and pipe 外壓管External pressure vessels 外壓容器allowable working pressure for 許用工作壓力charts 算圖design of heads for 封頭設計joints in shells of 殼體上的接頭rein

16、forcement for openings 開孔補強stiffening rings in shells 殼體上的剛性環supports for 支承thickness of shell 殼體厚度reducers 變徑段Fabrication, brazed vessels 制造，釬焊容器Ferritic steels vessels with tensile proper ties enhanced by heat treatment, design 經熱處理后提高抗拉性能的鐵素體鋼容器，設計fabrication 制造head design 封頭設計heat treatment熱處理he

17、at treatment verification tests 熱處理驗證試驗marking 標志materials 材stamping 標記welded joints 焊接接頭Field assembly of vessels 容器的現場安裝Filler plugs for trepanned holes 錐孔的管塞Fillet welds 角焊Fired process tubular heaters 直接火管式加熱爐Fitting attachments 附件裝配Flange connections 法蘭連接Flange contact facings 法蘭接觸面Flanges 法蘭bo

18、lted design 螺柱法蘭設計of formed heads for welding 用于焊接成型封頭type of attachment 附件的類型Flat heads and covers, unstayed 無支撐平封頭和蓋板reinforcement of openings 開孔補強Flat spots on formed heads 成型封頭上的平坦部分Flued openings 翻邊開孔Forged parts, small 鍛造部件，小的Forged vessels 鍛造容器heat treatment 熱處理localized thin areas 局部薄壁區weldi

19、ng 焊接Forgings 鍛件identification of 識別Ultrasonic Examination 超聲檢驗Formmanufacturers data report 制造廠數據報告格式partial report 零部件數據報告Formed heads 成型封頭lued openings in 封頭上翻邊開孔insertion of, welded vessels 插入，焊接容器joint efficiency 接頭系數knuckle radius 轉角半徑length of skirt 直邊長度on welded vessels 在焊接容器上reinforcement f

20、or openings 開孔補強Forming 成型ends of shell plates and buttstraps 殼體板和對接搭板端forged heads 鍛造封頭shell sections and heads 筒節和封頭Furnaces 爐子temperatures for postweld head treatment 焊后熱處理溫度Furnaces for heat treating 熱處理爐temperature control of 爐溫控制Galvanized vessels 鍍鋅容器Gasket materials 墊片材料Girth joints (see cir

21、cumferential joints) 環縫接頭(見環向接頭)Handhole and manhole openings 手孔和人孔開孔Head flange (skirt) length 封頭翻邊(直邊)長度Head joints 封頭接頭brazing 釬焊welded 焊接Head openings 封頭開孔entirely in spherical portion 全部在球體部分Head joints 封頭接頭concave and convex 凹面和凸面flat (see flat heads) 平板(見平封頭)forged 鍛造的formed (see Formed heads

22、) 成型的(見成形封頭)forming 面型thickness, after forming 厚度，成型之后Heads, design, conical 封頭，設計，錐形ellipsoidal 橢圓形hemispherical 半球形spherically dished 球狀碟形toriconical 帶折邊的錐形torispherical 帶折邊的球形torispherical, knuckle radius 帶折邊的球形，轉角半徑Heads and shells 封頭和殼體external pressure, out-of-roundness 外壓，不圓度openings through

23、or near welded joints 通過或靠近焊縫處的開孔roundness tolerance 不圓度公差Heat exchangers 熱交換器Heat treatment 熱處理by fabricator 由制造廠進行carbon and low-alloy steel vessels 碳鋼和低合金鋼容器ferritic steel vessels with tensile properties enhanced by heat treatment 經過熱處理后提高抗拉性能的鐵素體的容器forged vessels 鍛造容器furnaces 爐子high-alloy vessel

24、s 高合金容器heatment of test specimens 試樣的熱處理verification tests of 熱處理驗證試驗Hemispherical heads 半球形封頭High pressure vessels 高壓封頭Holes 小孔o(hù)r screw stays 用于螺絲固定for trepanning plug sections, refilling 用于穿孔螺塞部分，再填充telltale 指示孔u(yù)nreinforced, in welded joints 不補強，在焊縫上Hubs, on flanges 高頸，在法蘭上Hydrostatic proof tests

25、水壓驗證試驗destructive 破壞性prior pressure application 在升壓之前Hydrostatic test 水壓試驗cast iron vessels 鑄鐵容器combined with pneumatic 與氣壓試驗混合的enameled vessels 搪玻璃容器external pressure vessels 外壓容器galvanized vessels 鍍鋅容器standard 標準welded vessels 焊接容器Identification 識別of forging 鍛件of plates 平板of welds 焊接Identification

26、 markers, radiographs 識別標志，射線照相Impact test 沖擊試驗certification 證明properties 性能specimens 試樣temperature 溫度Inspection 檢查before assembling 組裝之前carbon and low-alloy steel 碳鋼和低合金鋼cast ductile iron vessels 可鍛鑄鐵容器cast iron vessels 鑄鐵容器clad vessels 覆層容器during fabrication 在制造期間ferritic steel vessels with tensil

27、e properties enhanced by heat treatment 經過熱處理后提高抗拉性能的鐵素體的容器fitting up 組對forged vessels 鍛造容器heat treatment, forgings 熱處理，鍛件high-alloy steel vessels 高合金鋼容器magnetic particle 磁粉material 材料nonferrous vessels 非鐵金屬容器plate 板材postweld heat treatment 焊后熱處理pressure vessels, accessibility 壓力容器，可達性quality contro

28、l 質量管理sectioning of welded joints 焊接接頭的剖面檢驗spot examination 抽樣檢查steel castings 鑄鋼件surfaces exposed and component parts 暴露的表面和元件部分test specimens 試樣vessels 容器vessels exempted from 免檢容器welded vessels 焊接容器Inspection openings 檢查孔Inspectors 檢查師access to plant 在廠內應有的便利control of stamping 打印管理duties 職責facil

29、ities 裝備qualification 資格reports 報告Installation 安裝pressure-relieving devices 泄壓裝置pressure vessel 壓力容器Integral cast iron dished heads 整體鑄鐵碟形封頭integrally finned tubes 整體翅片管Internal structures 內部構件Jacketed vessels 夾套容器Joints 接頭brazed 釬焊circumferential (see Circumferential joints) efficiency, brazed 環縫(見

30、環向接頭)系數，釬焊welded 焊接electric resistance, butt welding 電阻，對接焊in cladding and applied linings 在覆層及襯里in vessels subjected to external pressure 在承受外壓的容器lap (see Lap joints) 搭接(見搭接接頭)longitudinal (see Longitudinal joints) 縱向(見縱向接頭)tube-to-tubesheet 管子對管板Jurisdictional Review 權限審查Knuckles 過渡圓角radius 半徑tran

31、sition section 變徑段Lap joints 搭接接頭amount of overlap 搭接量brazed 釬焊longitudinal under external pressure 在外壓作用下縱向的welded 焊接Laws Covering Pressure Vessels 涉及壓力容器的法規Lethal gases or liquids 致命的氣體或液體Ligaments, efficiency of 孔帶，系數Limitation on welded vessels 焊接容器的限制Limit of out-of-roundness of shells 殼體不圓度的限制

32、Linings 襯里corrosion resistant 抗腐蝕Liquid penetrant examination 液體滲透檢驗Loadings 載荷Local postweld heat treatment 局部焊后熱處理Longitudinal joints 縱向接頭alignment tolerance 對準公差brazing 釬焊vessels subjected to external pressure 承受外壓的容器Low-temperature operation 低溫操作Low-temperature vessels brazed 低溫容器，釬焊for gases an

33、d liquids 用于氣體和液體impact test requirements 沖擊試驗要求impact test, when not required 沖擊試驗，當不要求時marking 標志materials 材料testing of materials 材料試驗Lugs for ladders, platforms, and other 梯子，平臺及其它附件的支耳Magnetic particle inspection 磁粉檢查Manholes, and handholes 人孔，手孔cover plate for 蓋板minimum vessel diameter requirin

34、g 所需最小容器直徑Manufacture, responsibility of 制造者，職責Manufacturers Data Report (see Data Report) 制造廠數據報告(見數據報告)Manufacturers stamps 制造廠的印記Marking castings 標志，鑄件materials 材料plates 板材standard pressure parts 標志受壓件valves and fittings 閥門和配件with Code symbol 帶有規范符號Markings, transfer after cutting plates 標志，板材切割以

35、后的轉移Materials, approval of new 材料，新材料的批準approval of repairs 修補的批準brazed vessels 釬焊容器carbon and low-alloy steel vessels 碳鋼和低合金鋼容器cast ductile iron 可鍛鑄鐵castings 鑄鐵cast iron vessels 鑄鐵容器certification 合格證clad vessels 覆層容器combination of 組合材料ferritic steel vessels with tensile properties enhanced by heat

36、treatment 經熱處理后提高抗拉性能的鐵素體鋼容器forged vessels 鍛造容器for nonpressure parts 非受壓元件heat treatment of 熱處理high-alloy steel vessels 高合金鋼容器inspection of 檢查nonferrous vessels 非鐵金屬容器pipe and tube 管子plate 板rods and bars 桿和棒specification for 標準standard pressure, parts 標準受壓元件unidentified 未鑒別的use of over thickness lis

37、ted in Section 采用超過列于第卷表中的厚度welded vessels 焊接容器Measurement, 測量dimension 尺寸out-of-roundness of shells 殼體不圓度Metal temperature determination 金屬溫度，確定control of 控制Mill undertolerance 鋼廠負公差控制Minimum thickness of plate 板材的最小厚度控制Miscellaneous pressure parts 其它受壓件控制Multichamber vessels design 多承壓室容器，設計Multip

38、le duplicate vessels 多個相同的容器Multiple safety valves 多個安全閥Nameplates 銘牌New materials 新材料Noncircular vessels 非圓形容器ligament efficiency 孔帶系數nomenclature 術語obround design 長圓形設計rectangular design 矩形設計reinforcement 補強examples 實例Nonpressure parts, attachment of 非受壓元件的連接Notch ductility test 缺口韌性試驗Nozzle openi

39、ngs, reinforced 接管開孔，補強的unreinforced 非補強的vessels subjected to external pressure 承受外壓得容器Nozzles attachment of to shell 接管，與殼體的連接minimum thickness of neck 縮頸的最小厚度(see also Connections)(也可見連接件)Nuts and washers 螺母和墊圈Offset of edges of plates at joints 在接頭處板邊的偏差Openings adjacent to welds 開孔，鄰近焊縫closure o

40、f 封閉for connections to brazed vessels 用于對釬焊容器的連接for drainage 用于排放head (see Openings head and shell) 封頭(見開孔，封頭和殼體)in flat heads 在平板封頭上inspection 檢查manhole (see Manholes) 人孔(見人孔)nozzle (see Nozzle opening) 接管(見接管開孔)shell (see Openings, head and shell) 殼體(見開孔，封頭和殼體)through welded joints 通過焊接接頭Openings,

41、 head and shell, computation of 開孔，封頭和殼體，計算not requiring additional reinforcement 不需要附加補強reinforced, size 補強，尺寸reinforcement for adjacent openings 鄰近開孔的補強reinforcement of 補強requiring additional reinforcement 需要附加補強shapes permissible 許用形式unreinforced, size 不補強的，尺寸Outlets, discharge, pressure relievin

42、g devices 排放口，出料，泄壓裝置Out-of-roundness 不圓度Overpressure limit for vessels 容器的超壓極限Partial data report, manufacturers 零部件數據報告，制造廠的Parts, miscellaneous 部件，各種各樣的Peening 捶擊Pipe connections openings for 管子的連接，用于開孔Pipe fittings vessels built of 管子配件，制造的容器Pipe and tubes 各類管子Pipe used for shells 用作殼體的管子piping

43、external to vessel 容器外的管子Plate, curvature 板，曲率measurement, dimensional check 測量，尺寸校核Plate edges cutting 板邊，切割exposed left unwelded 留下不予焊接的顯露部分inspection of 檢查Plates 平板alignment 找準cover 蓋板cutting 切割forming 成型heat treatment 熱處理identification 標志impact test 沖擊試驗inspection 檢查laying out 劃線less than 6 mm t

44、hickness 厚度小6mmmarkings transfer after cutting 標志，在切割以后的轉移minimum thickness 最小厚度repair of defects 缺陷修理specifications 標準structural carbon steel 結構碳鋼P(yáng)lug welds 塞焊Pneumatic test 氣壓試驗pressure 壓力yielding 屈服Porosity welded joints 氣孔，焊接接頭Porosity charts 氣孔圖Postheat treatment 后熱處理connections for nozzles and

45、 attachments 用于接管和附件的連接cooling after 隨后的冷卻 furnace temperature 爐溫local 局部requirements 要求temperature range 溫度范圍Preheating 預熱Preparation of plates for welding 焊接板材的準備limits 極限 (see also Working pressure, allowable) (也可見工作壓力，許用)Pressure parts miscellaneous 受壓件，其它的Pressure relieving devices 泄壓裝置discharg

46、e 排放installation and operation 安裝和運轉rupture disks 防爆模setting 整定Pressure vessels 壓力容器exempted from inspection 免檢Produce form of Specification 產品技術條件Proof test hydrostatic (see Hydrostatic proof test) 驗證試驗，水壓(見水壓試驗)Qualification 評定 of brazers 釬焊工 of welders 焊工 of welding procedure 焊接工藝Quality Control

47、System 質量保證體系Quenching and tempering 淬火及回火Quick-actuating closures 快開蓋Radiograph factor 射線照相系數Radiographing 射線照相examination by 檢查partial 部分quality factors 質量系數requirements 要求spot examination 抽樣檢查retests 重新試驗thickness, mandatory minimum 規定最小厚度Radiographs, acceptance by inspector 射線照相，由檢查員認為合格gamma ra

48、ys, radium capsule 射線，裝鐳的盒子interpretation by standard procedure 由標準程序的說明rounded indications 圓形顯示Reaming holes for screw stays 為固定螺釘用的鉸孔Reducer sections, rules for 變徑段，規程Reinforcement 補強defined limits 規定的范圍head and shell openings 封頭及殼體開孔large openings 大開孔multiple openings 多個開孔nozzle openings 接管開孔o(hù)f o

49、penings in shells, computation of 殼體上開孔，計算openings subject to rapid pressure fluctuation 經受壓力突然波動的開孔Fluctuation 經受壓力突然波動的開孔strength 強度Relief devices 泄放裝置 (see also Pressure relieving devices, Safety and relief Valves)(也可見泄壓裝置，安全閥和泄壓閥)Relieving capacity of safety valves 安全閥排量Repairs, approval of defe

50、cts in material 修理，材料中缺陷的認可defective Brazing 有缺陷的釬焊defects in forgings 鍛件中的缺陷defects in welds 焊縫中的缺陷Responsibility of manufacturer 制造者的職責Retention of Records 記錄的保存Radiographs 射線照相Manufacturers Data Reports 制造廠的數據報告Retests, frogings 復試，鍛件impact specimens 沖擊試樣joints, welded 接頭，焊接Rods, bars, and shapes

51、 桿棒喝型材Rolled parts, small 軋制件，小件Rupture disks 爆破模Safety 安全性safety relief, and pressures relief valves, adjustable blow down, capacity certification 安全泄放和泄壓閥，可調節的泄放，排放量證明capacity, conversion 排量，換算connection to vessels 連接至容器construction 結構discharge pipe 排放管indirect operation 間接操作installation 安裝install

52、ation on vessels in service 容器在役時的安裝liquid relief 液體泄放marking 標志minimum requirements 最低要求pressure setting 壓力整定spring loaded 受載彈簧springs, adjustment 彈簧，調節stop valves adjacent to 鄰近的截止閥test 試驗protective devices 防護裝置for unfired steam boiler 對非直接火蒸氣鍋爐Scope 適用范圍sectioning, closing holes left by 解剖，解剖孔的封閉

53、etching plugs taken 解剖樣的侵蝕examination by 檢查Service restriction 使用限制Shapes, special 形狀，特殊Shell plates, forming ends of 殼體用材料，封頭成型Shells 殼體allowable working pressure 許用工作壓力computation of openings in 開孔計算forming 成型made from pipe 由管子制造的stiffening rings 剛性環thickness 厚度Transition section 過渡段Sigma-phase fo

54、rmation 相的形成Skirts length on heads 直邊、封頭上的長度support of vessels 裙座，容器支撐Slag inclusion welds 焊縫中的夾渣Special constructions 特殊結構Specification for materials 材料標準Spherical sections of vessels 容器的球形部分Spot examination of welded joints 焊接接頭的抽樣檢查Springs for safety valves 安全閥的彈簧Stamping location of 打印位置multipre

55、ssure vessels 多重壓力容器omission of 省略safety valves 安全閥with Code symbol 帶有規范標記Stamps, certificate of authorization 鋼印，授權l(xiāng)ow stress 低壓力not to be covered 不應覆蓋to be visible on plates 在板上可見Static head, in setting safety valves, effect of on limiting stresses 靜壓頭，在整定安全閥時，影響，對極限應力Stayed surfaces 支撐表面Staying formed heads 成型封頭的支撐Stays and staybolts, adjacent to edges of staybolted surface 支撐件及拉撐螺栓，鄰近用螺栓拉撐得表面周邊處allowable stress 許用應力area supported 支撐面dimensions 尺寸ends 端部locatio