文稿影院庫手冊installation

1、DP2K-15CInstallation manualR59770431/02 02/02/2010Barco nv Media & Entertainment Division Noordlaan 5, B-8520 KuurnePhone: +32 0Fax: +32 56.36.883.86: sales.events Visit us at the web:Printed in BelgiumChangesBarco provides this manual as is without warranty of any kind, either express

2、ed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.This publication could contain tec

3、hnical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication.Copyright ©s. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorde

4、d, transmitted orstored in a retrieval system without the prior written consent of Barco.Disposal InformationThis equipment has required the extraction and use of natural resources for its production. It may contain hazardous substances for health and environment. In order to avoid the dissemination

5、 of those substances in the environment and to diminish the pressure on natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end of life equipment in a sound way.The crossed-out wheeled bin symbol invites you

6、to use those systems. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administrator. You can also contact us for more information on the environmental performances of our products.EN55022/CISPR22 Class A ITE (Information Techno

7、logy Equipment)Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use:Warning : This is a class A product. In a domes

8、tic environment this product may cause radio interference in which case the user may be required to take adequate measures.Federal Communications Commission (FCC Statement)This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC

9、rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

10、may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible for correcting any interference at his own expenseTrademarksBrand and product names mentioned in this manual may be tra

11、demarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers.Guarantee and CompensationBarco provides a guarantee relati

12、ng to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complai

13、nts.The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own

14、discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage

15、attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross n

16、egligence or part of Barco.If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to infl

17、uences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage aresystem failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal

18、 maintenance are not subject to the guarantee provided by Barco either.The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by the customer.GNU-GPL codeIf you would like a copy of the GPL source code contained in this pr

19、oduct shipped to you on CD, please contact Barco. The cost of preparing and mailing a CD will be charged.Information for China ROHS complianceTable of toxic and hazardous substances/elements and their content, as required by Chinas management methods for controlling pollution by electronic informati

20、on products陸 RoHS陸 電子信息污染管理辦法( 也稱為陸 RoHS)，以下部份列出了本中可能包含的有害物質或元素根據的名稱 和含量。Projector零部件名稱有害物質或元素鉛（Pb）（Hg）鎘（Cd六價鉻（Cr6+）多溴聯苯（PBB）多溴二苯醚（PBDE）金屬機構件oooooo塑膠機構件xooooo電路板組件*xooooo燈泡oxoooo電源模組xooooo電源線xooooo外部信號連接線xoooooProjectorPart nameToxic or hazardous substances and elementsPbHCr6+PBBPBDEMpartsooooooPlas

21、tic partsxoooooPCB or PCBAxoooooLampoxooooPower supply/adapterxoooooPower cablexoooooConnectors and cablesxoooooFansxoooooHeat radiation module (mparts)xoooooCard readerooooooSpeaker (exclude PCB)ooooooRemote control (exclude PCB)xoooooO: Indicates that this toxic or hazardous substance contained in

22、 all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006Projector零部件名稱有害物質或元素鉛（Pb）（Hg

23、）鎘（Cd六價鉻（Cr6+）多溴聯苯（PBB）多溴二苯醚（PBDE）風扇xooooo散熱模組 (金屬部分)xooooo讀卡器oooooo喇叭 (電路板組件除外)oooooo附電池遙控器 (電路板組件除外)xooooo*： 電路板組件包括印刷電路板及其的零部件，如電阻、電容、集成電路、連接器等 ：表示該有害物質在該部件所有均質材料中的含量均在電子信息中有害物質的限量要求標準規定的限量要求以下×：表示該有害物質至少在該部件的某一均質材料中的含量超出電子信息中有害物質的限量要求標準規定的限量要求；但 是上表中打“×”的部件，其含量超出是因為目前業界還沒有成可替代的技術，且符合歐盟

24、RoHS指令的排外條款及電池指令Table of contentsTABLE OF CONTENTS1.Safety31.1 General considerations41.2 Important safety instructions5General92.1 Installation requirements102.2 Unpacking the projector112.3 Initial inspection132.4 Installation process overview14Physical installation3.5Positioning

25、 the DP2K-15C at port window16Installation of the exhaust system19Connecting the projector with the power net20Power loop through to the projector electronics22Connecting a UPS with the projector electronics244.Lamp & lamp house254.1Introduction26Removal of the lamp house28Removal of the xenon l

26、amp30Installation of the Xenon lamp34Installation of the lamp house40Resetting the lamp parameters42Realignment of the lamp in its reflector45.Lenses & lens holder45.7Available lenses46Lens selection47Lens formulas48Lens removal49Lens installation50Lens shif

27、t, zoom & focus52Scheimpflug adjustment536.Input & communication576.16.2Introduction58Local keypad of the DP2K-15C projector59Communication ports of the DP2K-15C projector60About General Purpose Inputs & Outputs (GPIO)62Source input ports of the DP2K-15C projector64LED indications on the

28、 Integrated Cinema Processor module66.67.Communicator touch panel677.17.2Introduction68Installing the touch panel interface70Reposition the touch panel interface727.38.Starting up738.1 Switching ON the DP2K-15C digital projector748.2 Switching OFF the DP2K-15C digital projector75Projector

29、registration779.1 Introduction789.2 Download the certificate file799.3 Registration of new projector809.4 Update registration of an existing projector869.10. Removal and installation of projector covers8710.410.510.610.710.810.9Removal of the lamp cover88Removal of the input cover89Remov

30、al of the front cover90Removal of the side cover91Removal of the rear cover92Removal of the top cover93Open the sealed compartment95Close the sealed compartment96Installation of the top cover9710.10 Installation of the rear cover9810.11 Installation of the side cover9910.12 Installation of the front

31、 cover10010.13 Installation of the input cover101R59770431 DP2K-15C 02/02/20101Table of contents11. Maintenance10311.411.511.611.711.811.9Removing the front dust filter104Clean the dust filter on the bottom side106Clean the dust filter on the top side107Cleaning the lens108Cleaning the e

32、xterior of the projector109Check cooling liquid level110Cooling liquid refill111Cleaning the UV blocker of the Lamp House112Authorization to clear security warning on the projector11312. Convergence11512.4Convergence controls116Preparing the convergence adjustment118Red on Blue convergen

33、ce119Green on Blue convergence121A. Specifications123A.1A.2A.3A.4Specifications of the DP2K-15C124Dimensions of the DP2K-15C.125Center of gravity of the DP2K-15C126Dimensions of the universal pedestal127B. Pin configurations129B.1 Pin configurations of the communication ports130B.2 Pin configuration

34、s of the inputs132Index1332R59770431 DP2K-15C 02/02/20101. Safety1.SAFETYAbout this chapterRead this chapter attentively. It contains important information to prevental injury while installing and using a DP2K-15Cdigital projector. Furthermore, it includes several cautions to prevent damage to the D

35、P2K-15C digital projector. Ensure that youunderstand and follow all safety guidelines, safety instructions and warninentioned in this chapter before installing your DP2K-15C digital projector. After this chapter, additional “warnings” and “cautions” are given depending on the installation procedure.

36、 Read and follow these “warnings” and “cautions” as well.OverviewGeneral considerationsImportant safety instructionsR59770431 DP2K-15C 02/02/2010 31. Safety1.1General considerationsGeneral safety instructionsBefore operating this equipment please read this manual thoroughly and retain it for future

37、reference.Installation and preliminary adjustments should be performed by qualified Barco ers.nel or by authorized Barco service deal-All warnings on the projector and in the documentation manuals should be adhered to. All instructions for operating and use of this equipment must be followed precise

38、ly.All local installation codes should be adhered to.Notice on safetyThis equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment inc

39、luding electrical business equipment. These safety standards impose important requirements on the use of safety critical components, materials and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and having access to live parts. Safety standards a

40、lso impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipments nor

41、mal operation fails.Users definitionThroughout this manual, the term SERVICENEL refers tos having appropriate technical training and experiencenecessary to be knowledgeable of potential hazards to which they are exposed (including, but not limited to HIGH VOLTAGE ELEC- TRIC and ELECTRONIC CIRCUITRY

42、and HIGH BRIGHTNESS PROJECTORS) in performing a task, and of measures to minimizethe potential risk to themselves or others. The term USER and OPERATOR refers to anyother than SERVICE PER-SONNEL, AUTHORIZED to operate professional projection systems located in RESTRICTED ACCESS LOCATIONS.The DLP Cin

43、ema Systems are intended "FOR PROFESSIONAL USE ONLY" by AUTHORIZEDNEL familiar with poten-tial hazards associated with high voltage, high intensity light beams, ultraviolet exposure and high temperatures generated by thelamp and associated circuits. Only qualified SERVICE functions inside

44、the product enclosure.NEL, knowledgeable of such risks, are allowed to perform serviceRestricted access locationThe DP2K-15C digital projector may only be installed in a restricted access location, due to the temperature rise of parts of the equipment (air outlet). The definition of a “restricted ac

45、cess location" is a location for equipment where both of following paragraphs apply:Access can only be gained by SERVICES or by USERS who have been instructed about the reasons for the restrictionapplied to the location and about the precautions that shall be taken.Access is through the use of

46、the tool or lock and key, or other means of security, and is controlled by the authority respons ble for the location.Owners recordThe part number and serial number are printed on a label which is stuck on the respective part. Record these numbers in the spaces provided below. Refer to them whenever

47、 you call upon your Barco dealer regarding this product.4R59770431 DP2K-15C 02/02/2010Product article numberProduct serial numberDealer1. Safety1.2Important safety instructionsTo prevent the risk of electrical shockThis projector should be operated from an AC power source. Ensure that the mains volt

48、age and capacity matches the projector electrical ratings. If you are unable to install the AC requirements, contact your electrician. Do not defeat the purpose of the grounding.Installation according to the local electrical code and regulations by qualified technicalnel only.This product is equippe

49、d with a three-terminal barrier strip for the connection of a mono phase line with a separate earth ground PE. If you are unable to install the AC Requirements, contact your electrician. Do not defeat the purpose of the grounding.The cross-sectional area of the conductors in the power supply cord sh

50、all be not less than 4 mm 2 or AWG 10.The electronics of the projector must be powered either from a suitable UPS unit or from the power outlet socket (UPS OUTLET) provided on the projector. For that reason an adapted short power cord (2-pole 3-wire grounding) is added to the projector accessories t

51、o loop through the power.The provided power output socket (UPS OUTLET) on the projector may only be used to provide power to the projector elec- tronics. Never connect other devices to this power output socket.The circuit breaker(s) that must be provided in the power circuit(s) of the projector is c

52、onsidered as general disconnect switch(es) to switch off the complete installation.Switch off the projector and unplug the power cord from the UPS INLET for removal of all power from the projector. Warning: High leakage current. Earth connection essential before connecting supply.Do not allow anythi

53、ng to rest on the power cord. Do not locate this projector wheres will walk on the cord.Do not operate the projector with a damaged cord or if the projector has been dropped or damaged - until it has been examined and approved for operation by a qualified service technician.Position the cord so that

54、 it will not be tripped over, pulled, or contact hot surfaces.If an extension cord is necessary, a cord with a current rating at least equal to that of the projector should be used. A cord rated for less amperage than the projector may overheat.Never push objects of any kind into this projector thro

55、ugh cabinet slots as they may touch dangerous voltage points or short circuit parts that could result in a risk of fire or electrical shock.Do not expose this projector to rain or moisture.Do not immerse or expose this projector in water or other liquids. Do not spill liquid of any kind on this proj

56、ector.Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualified service resuming operations.nel beforeDo not disassemble this projector, always take it to an authorized trained serviceDo not use an accessory attachment which is not recommended by the manufacturer.w