平煤二礦1.8mt摘要

1、摘要本設計包括三個部分：一般部分、專題部分和翻譯部分。一般部分共包括 10 章：1.礦區概述及地質特征；2.境界和儲量；3.礦井工作制度、設計生產能力及服務年限；4.開拓；5.準備方式帶區巷道布置；6.采煤方法；7.井下礦井基本技術經濟指標。；8.礦井；9.礦井通風與安全技術；10.一般部分為平煤二礦 1.8Mt/a 新井設計。平煤二礦位于省平頂山市，交長約 4.9 km，傾向長約 5.2 km，總面積為 25.48km2。主通便利。采煤層為四 1（戊 ）煤，傾角 317，平均 8。煤層平均厚度為 3.45 m。210地質條件較為簡單。工業儲量為 197.18Mt，礦井可采儲量 159.32

2、Mt。礦井服務年限為 63.2a，涌水量不大，礦井正常涌水量為 548 m3/h，最大涌水量為 1070 m3/h。礦井相對瓦斯涌出量為 5.94 m3/t，為低瓦斯礦井。根據地質條件，提出四個技術上可行的開拓方案。方案一：立井單水平上下山（巖石大巷）；方案二：立井單水平上下山（煤層大巷）；方案三：立井兩水平暗斜井延深（巖石大巷）；方案四：立井兩水平暗斜井延深（煤層大巷）。通過粗略和詳細技術經濟比較，最終確定方案一為最優方案。一水平標高-430m，整個劃分為 2 個帶區和 2 個盤區。礦井采用 礦井采用帶區式準備方式，工作面設計長度全高采煤工藝。礦井年工作日為 330d，晝夜凈并列式通風方式。

3、200m，采用綜合機械化一次采時間為 16h。礦井采用“四六”制工作制度，三班生產，一班檢修。循環進尺為 0.6m，日產量為 5402.7t。專題部分題目為淺析巷旁充填技術的研究與應用。翻譯部分題目為 Geotechnical considerations：新井設計，立井，單水平，帶區，ine backfilling in Australia。并列式ABSTRACTThe three parts is includedand translation.his design,i.e.,teral part, spel subject partThis general part includes t

4、en chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine;4.Development engineering of coalfield; 5.The layout of panels; 6. The method usedin coal mining; 7. Transporion of the underground; 8.The lifting of the mine; 9. T

5、heventilation and the safety operation of the mine; 10.The basic economic and technicalnorms.Tmillion t/a.eral part is a new design ofdingshan mine lines indingshan mine wiproduction of 1.8dengshan city, HeNan province. Thetraffic of road and railway is very convenience to the mine. The run of the m

6、inefield is 4.9 km ,the width is about 5.2 km, well farmland total area is 25.25 km2. No. 4 are the main coal seam, and its dip angle is 217, 8 for average. The thickness of the mine are about 3.45 m. The geological conditions of the minefield is relatively simple. The proved reserve of the minefiel

7、d is 197.18 Mt. The designed productive capacity is159.32Mt, and the service life of the mine is 63.2years. The normal water flow of the mine is 548 m3/h and the max flow of the mine is 1070 m3/h. The relativegas emisrate of the mineral well is 5.94 m3/t, for low gas mineral well.Based on the geolog

8、ical conditions of the mine, I bring forward four availableprojectechnology. Theis vertical shaft development with one mining levels,the deep extenof blind slope; the second is vertical shaft development with twomining levels; the third is vertical shaft development with one mining levels and thedee

9、p extenof blind slope,and the last is slope shaft development with two mininglevels. The four project is the best comparing with other three projectsechnologyo four strip he east andand economy. Themining level is -430m. The mine field is divideddistricts and one mining district. Takingo account the

10、 long distancewest direction, The type of mine ventilation is the centralized juxtae ventilation.Designedmining district makes use of the method of the mining districtpreparation. The design length of working face is 200 m, which uses fully mechanized mining with full-seam mining technology. The wor

11、king days in one year are 330. Everyday it takes 16 hours in lifting the coal. The operation mode in the mine is“four-six” with three teams mining and the other overhauling. Every mining teammakes three working cycle, and the overhauling team makesorking cycle. Soeveryday there are 6 working cycles. The advance of a working cycle is 0.6 m, and thety of 5402.7 ton coal is maked everyday.Spel subject part of topics is:ysis the study and applicatioon of roadsidepacking technology.The translated academi