數據倉庫系統設計說明書

經典word整理文檔，僅參考，雙擊此處可刪除頁眉頁腳。本資料屬于網絡整理，如有侵權，請聯系刪除，謝謝！歸一大數據平臺數據倉庫系統設計說明書系統設計說明書2-系統設計說明書1背景2..........................................................................................................................................................................................................34...........................................................................................1156783-系統設計說明書4-系統設計說明書01234567891引言5-系統設計說明書6-系統設計說明書2總體設計）））7-系統設計說明書3系統接口設計無接口。4子系統/模塊設計4.1.1ODL(操作數據層設計4.1.1.1功能描述實現從外部系統導入數據到大數據平臺,ODL層數據與數據源保持一致.同步方式包括:增量同步全量同步數據源類型包括:數據庫4.1.1.2業務流程流程圖:8-系統設計說明書數據源系統數據庫遠程調用讀取同步腳本數據庫同步是否流程說明:1.調度系統定時啟動數據同步作業.2.作業讀取數據同步腳本,遠程調用數據庫接口.3.數據庫接口返回遠程調用結果.4.接收數據庫接口返回的數據集,裝載到ODL本地表.異常處理:調度系統捕獲異常并處理日志說明:由調度系統負責記錄作業正常和異常日志.數據源說明:1.通過視圖封裝需要同步的物理表,與業務進行隔離.當物理表發生變動,盡量通過修改視圖兼容.2.數據同步程序訪問數據源視圖.數據粒度說明：與數據源保持完全一致。4.1.1.3作業設計詳見數據同步列表.xlsx>>9-系統設計說明書4.1.2事物層設計4.1.2.1功能描述BDL層對ODL數據進行清洗、轉換，實現統一維度的數據整合。4.1.2.2業務流程流程圖:BDL數據流程圖讀取作業腳本數據清洗L階維度轉換、捕獲維表段結束流程說明:1.調度系統定時啟動數據同步作業.2.作業讀取ODL表，進行數據清洗，對不符合規則的數據進行丟棄或轉換.3.將轉換后的結果數據裝載到BDL本地表.異常處理:調度系統捕獲異常并處理.日志說明:由調度系統負責記錄作業正常和異常日志.10-系統設計說明書數據粒度說明：與ODL保持一致.4.1.2.3作業設計詳見數據倉庫轉換文檔.xlsx>>4.1.3IDL(寬表層設計4.1.3.1功能描述在IDL層對BDL事實表按主題進行合并,形成一次寫多次讀的寬表,降低系統整體開銷.并實際根據需要進行用戶級粒度的聚合,進一步提高查詢效率.4.1.3.2業務流程流程圖:分布式數據倉庫讀取作業腳本按主題關聯事物級粒度L階用戶級粒度聚合段結束流程說明:11-系統設計說明書1.調度系統定時啟動數據同步作業.2.按主題讀取相關BDL表,進行關聯,盡量補齊維度字段,生成事物級寬表.3.按用戶級粒度聚合,生成用戶級寬表.異常處理:調度系統捕獲異常并處理日志說明:由調度系統負責記錄作業正常和異常日志.數據粒度說明:1.事物級粒度.2.用戶級粒度.4.1.3.3作業設計詳見數據倉庫轉換文檔.xlsx>>4.1.4PDL(應用層設計4.1.4.1功能描述PDL層按業務需求,IDL寬表匯總查詢生成各種結果表.4.1.4.2業務流程流程圖:12-系統設計說明書調度系統開始各種粒度聚合讀取作業腳本維度條件篩選生成指標數據段結束流程說明:1.調度系統定時啟動數據同步作業.2.讀取IDL寬表,按業務需求進行聚合,篩選,生成指標數據.3.結果寫入PDL層結果表.異常處理:調度系統捕獲異常并處理日志說明:由調度系統負責記錄作業正常和異常日志.數據粒度說明:1.按業務需求的各種粒度.4.1.4.3業務賬數據統計設計業務賬數據統計如下特點:業務賬指標由多個交易類型代碼組合,一個交易類型代碼對應多個業務指標,例如:13-系統設計說明書業務賬指標A交易類型代碼{M00010,M00001,M00002,M00003,…}業務賬指標B交易類型代碼{M00010,,M00012,M00013,…}業務賬指標C交易類型代碼{M00000,,M00002,M00023,…}隨需求也業務變化,業務賬指標及其交易類型代碼也會變化.每個業務賬指標統計算法相同,只是其交易類型代碼組合不同.每個業務賬指標可能會被多個報表調用，例如積分總金額”針對以上特性,運算統一化技術的功能，減少系統維護成本。4.1.4.4作業設計詳見數據倉庫轉換文檔.xlsx>>14-系統設計說明書4.1.5PUB(維度庫設計4.1.5.1功能描述采用異步LOOUP方法,主動捕獲非法維度數據,經過人工識別生成維度數據.4.1.5.2業務流程流程圖:調度系統開始分布式數據倉庫ODL表、維表讀取作業腳本捕獲異常維度是段結束流程說明:1.調度系統定時啟動數據同步作業.2.異步讀取ODL表和維表,對比維度映射表查找是否有不存在的維度數據.3.如果發現非法維度數據,經過人工識別,寫入維度映射表和維度表.異常處理:調度系統捕獲異常并處理日志說明:由調度系統負責記錄作業正常和異常日志.15-系統設計說明書4.1.5.3作業設計詳見數據倉庫轉換文檔.xlsx>>4.1.6業務賬數據集市庫4.1.7數據導出設計4.1.7.1功能描述將PDL表和維度導出,同步給mysql庫,供統計報表查詢使用.4.1.7.2業務流程數據導出流程圖門戶系統統計表、維表ETL階段流程說明:1.調度系統定時啟動數據同步作業.16-系統設計說明書2.讀取PDL表和維表,將數據裝載到MY