筆筒注塑模具設計說明書

摘要論文題目：筆筒注塑模具設計說明書摘要本次課題是要對筆筒注塑模進行研究，對筆筒的結構與用途進行分析之后，確定生產所用原料，另外對制件的成型工藝進行了解。通過筆筒的結構以及規格，對型腔的個數進行確定。對模具的整體構造進行分析之后，對其成型零部件與澆注部件進行設計。接著針對模具的結構，設計出冷卻系統。選取了標準模架，以及其他標準零件，縮短模具設計的周期。設計筆筒注塑模時，結合制件的結構，所用原料的特性，對模具進行了一些列驗證，通過數據可知本次設計的模具合理。另外，對注塑設備的相關數據進行了驗證，所選設備符合設計要求。此次注塑模的設計，使用了軟件CAD進行裝配圖與零件圖的繪制。通過三維軟件實現了建模。另外通過專業的插件，讓輔助設計得以實現。關鍵詞：機械設計；模具設計；結構設計；注塑工藝；校核ABSTRACTABSTRACTABSTRACTThistopicistostudythepenholderinjectionmold,analyzethestructureandpurposeofthepenholder,determinetherawmaterialsusedinproduction,andunderstandthemoldingprocessoftheparts.Determinethenumberofcavitiesthroughthestructureandspecificationsofthepenholder.Afteranalyzingtheoverallstructureofthemold,themoldedpartsandcastingpartsaredesigned.Thenforthestructureofthemold,acoolingsystemwasdesigned.Standardmoldbasesandotherstandardpartsareselectedtoshortenthecycleofmolddesign.Whendesigningthepenbarrelinjectionmold,combiningthestructureofthepartandthecharacteristicsoftherawmaterialsused,aseriesofverificationswerecarriedoutonthemold.Thedatashowsthatthemolddesignedthistimeisreasonable.Inaddition,therelevantdataoftheinjectionmoldingequipmentwasverified,andtheselectedequipmentmetthedesignrequirements.Inthedesignoftheinjectionmold,softwareCADwasusedtodrawassemblydrawingsandpartsdrawings.Themodelingisrealizedthrough3Dsoftware.Inaddition,theauxiliarydesigncanberealizedthroughprofessionalplug-ins.KEYWORDS:Mechanicaldesign;Diedesign;Structuraldesign;Injectionmoldingprocess;Verification目錄目錄參考文獻趙陽.Moldflow在活動接觸座澆口優化設計中的應用[J].山東工業技術,2018(05):60-61.翟林,韓國泰,胡海朝,張建新.基于Moldflow與Abaqus的注射成型及模具結構聯合仿真分析[J].中國塑料,2018,32(02):128-133.何鏡奎,陳洪土.汽車側裙板的熱流道大型注塑模具設計[J].中國塑料,2018,32(02):134-140.朱曉東.基于Moldflow技術的汽車前保吸能塊模流分析與優化[J].塑料科技,2018,46(02):85-87.韋成松.淺談注塑模具的分類與維護[J].山東工業技術,2018(03):245.李桂金,匡唐清,金凱.基于隨形水路技術的帶把雙色水杯注塑模具設計[J].中國塑料,2018,32(01):131-136.張正,張星光,汪凱,程生.一種馬芬紙杯成型模具熱分析[J].內江科技,2018,39(01):46+13.董海東.咖啡壺嘴側抽芯注塑模具設計[J].模具技術,2018(01):6-9.黃賢頁,郝彥琴,趙利平.基于定模抽芯的某大型工具箱面蓋注塑模設計[J].模具技術,2018(01):10-15.谷平東.食物攪拌機筆筒注射模設計[J].中國新技術新產品,2018(02):63-64.田園,馬學良.塑料行業的計算機網絡輔助工業設計應用探討[J].塑料工業,2018,46(01):58-61+127.張新聚,劉雷,李亞男.一種基于3D打印的塑料零件快速制造工藝研究[J].塑料工業,2018,46(01):75-78.邵樹鋒.基于UG的汽車濾清蓋注塑成型與數控加工[J].塑料工業,2018,46(01):62-66+98.胡智清,周全,熊建武.仿真步槍槍托機械式自動脫模機構及注塑模具設計[J].塑料工業,2018,46(01):54-57.張曉光.基于CAD/CAM的底座熔模模具設計[J].熱加工工藝,2018(01):121-123.朱佳順.一出一及一出多外觀件產品模具內模精定位結構設計[J].家電科技,2018(01):63-65.焦冬梅,楊秀國.波輪模具結構的優化設計[J].橡塑技術與裝備,2018,44(02):53-57.盧帥龍,黃聰明,黎懿維,黃金培,林立,林權.基于UG與MOLDFLOW雙分型小水口注塑模設計[J].佳木斯大學學報(自然科學版),2018,36(01):75-79.肖允鑫.基于UG的塑料模具快速設計二次開發的研究[J].山東工業技術,2018(02):40-41.許瓊琦,梁衛抗,王建杰,劉瓊,王乾廷.汽車安全玻璃的嵌裝式安裝托架注射工藝研究[J].模具工業,2018,44(01):34-39.Babalola

Akinloluwa

Samuel,Duncan

Folley.

Design

and

Construction

of

a

Sensor

Analytics

System

for

the

Monitoring

of

the

Parameters

of

a

Plastic

Injection

Mould[J].

International

Journal

of

Sensors

and

Sensor

Networks,2021,9(1).Krizsma

Sz.,Kovács

N.K.,Kovacs

J.G.,Suplicz

A..

In-situ

monitoring

of

deformation

in

rapid

prototyped

injection

m