年海格電氣智能家居TEBIS新產品培訓41.ppt

1、Hager 2014新產品培訓,新產品培訓,本次新產品清單,新品概覽,產品系列,狀態自檢,故障上傳,優先級控制,程序恢復,LED指示,電流檢測,調光識別,新手動模式,新邏輯功能,新場景功能,窗簾反饋,電流檢測,用戶： 我能從可視化軟件上更清楚地了解我想要知道的信息了,工程單位： 軟件反饋的信息更加可靠，可以用來做更多應用。,電流檢測精度更高：達到2,TYA606E,電流檢測,調光識別,可以自動檢測使用的是什么類型的燈具，調節調光曲線，同時加強了LED、CFL燈的調光。 且對LED、CFL燈進行調光時，無需再外加電子整流器,狀態自檢、故障上傳（開關）,及時地了解 模塊的狀態 防患于未然,超過額定

2、電流故障,觸點動作過于頻繁,繼電器觸點動作故障,服務器,KNX,過載報警,過熱報警,短路報警,過壓報警,能夠更即時地了解模塊的狀態， 從而更快更準確地解決問題,狀態自檢、故障上傳（調光）,手動模式,改進后的手動模式將帶狀態反饋，同時手動模式將可以被控制，避免了手動模式下遠程無法控制的情況。從此不再被束縛。,優先級控制,可以實現多種控制手段的優先級別，控制更清晰，控制信息將按照新的優先級別執行。,新邏輯功能,新的模塊將具有更強的邏輯功能，可以獨立完成常見邏輯控制需求，無需另外配置邏輯模塊，節約造價，提高可靠性。,因此，原先很多需要用邏輯模塊才能完成的工作現在可以輕松地滿足客戶的需求。,- 每個邏

3、輯最多4個輸入 - 最多2個邏輯輸出 - 邏輯輸出結果可設定 - 并不直接關聯與相對應的輸出,程序恢復,新的模塊可以設定程序記憶點，在程序被修改后，可以恢復之前存儲的時間點時的程序設定。,場景功能,新的模塊中，場景的參數設置有了更多的選擇，特別是1-bit Scene調用數量增加到4個，極大地方便了編程和場景設定，從而完成更加復雜的設計。,LED指示,新模塊的LED指示燈的變化也有了更多的選擇。 可通過ets自由定義運行規則，可在手動模式下發送狀態反饋。,窗簾反饋,可通過反饋獲知窗簾位置狀態，而不只是是否在運行。可選擇到頂或到底反饋設定，如到頂部反饋發1。,新產品詳解,功能塊,開關輸出模塊：參

4、數詳解1,Output contact type : Normally closed, normally open Timer function activation: Not used, used Timer operation : ON, OFF, Blinking Timer/toggle change-over activation: Enabled, Disabled Timer duration modifiable through object “Timer duration”: Enabled, Disabled Timer duration : h, min, s Tripp

5、ing delay: Disabled, h, min, s Switching delay: Disabled, h, min, s Cut-OFF pre-warning: Disabled, h, min, s Timer interruption : Interruptible timer, Non-interruptible timer Timer retriggerable : Yes, No Timer duration extension: No limitation, 1 to 5 time duration extension Time limited toggle swi

6、tch activation: Enabled, Disabled Time limited toggle switch duration: h, min, s Blinking “ON” duration: h, min, s Blinking “OFF” duration: h, min, s Output status emitted during Blinking function: ON, OFF, ON/OFF Operating hours counter activation: Enabled, Disabled Relay status for operating hours

7、 counter: Normally closed, normally open Operating hours counter direction: Incremental counter, decremental counter Operating hours counter set point value: 1 65535 h Operating hours counter set point value modifiable through “Operating hours counter set-point” object: Enabled, Disabled Emission of

8、 the “Operating hours counter value” object: Not used, periodically Time for periodical emission of the “Operating hours counter value” object: h, min, s,Basic functions,ON/OFF,Timer,Timer / Toggle change-over,Time limited toggle switch,Timer duration,Hours counter value,Hours counter setpoint,Reset

9、 hours counter,Hours counter setpoint reached,Scene,Restore scene,開關輸出模塊：參數詳解2,Preset function activation: Disabled, Preset 1-Level, Preset 2-Level Activation of Preset authorization objects: Yes, No Polarity of Preset 1/2 authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 =

10、not authorized Output status if preset 1/2 object X = 1: Unchanged, Invert status, ON, OFF, Scene X, Blinking, Status before Preset object =”0” Output status if preset 1/2 object X = 0: Invert status, ON, OFF, Scene X, Blinking Status before Preset object =”1” Activation of Scene function: Enabled,

11、Disabled Number of scenes displayed: 8, 16, 24, 32, 64 Status for scene X : ON, OFF, Blinking, not concerned Scene memorisation by long press on ambient push button: Enabled, Disabled Scene memorisation acknowledgment: Enabled, Disabled Restore ETS-parameters settings object activation: Enabled, Dis

12、abled Overwrite of Scene, timer and operating hours counter value at next download: Enabled, Disabled Status ON/OFF activation: Enabled, Disabled Polarity of Status object ON/OFF: 0 = OFF ; 1 = ON, 0 = ON ; 1 = OFF Emission of Status object ON/OFF: On change, Periodically, On change and periodically

13、 Time for periodical emission of the Status object ON/OFF: h, min, s Emission of Status object during manual mode : Enabled, Disabled Time delay for emission of “ON/OFF Status” objects after bus power cut: h, min, s Output status during bus power cut: Unchanged, ON, OFF Output status at bus power re

14、turn: Unchanged, ON, OFF Status during and after ETS download: Unchanged, ON, OFF Diagnosis object activation: Not used, used Emission of Diagnosis object: On change, Periodically, On change and periodically Time for periodical emission of the Diagnopsis object: h, min, s,Basic functions,Preset 1,Pr

15、eset 2,Autorisation Preset 1,Autorisation Preset 2,Output status,Scene,Restore scene,Diagnosis,調光模塊：參數詳解1,Relative dimming speed: h, min, s Switch ON speed: h, min, s Cut OFF speed: h, min, s Brightness value at switch ON: 0100 %, 101% = Last value Minimum dimming value: 150% Maximum dimming value:

16、51100% Timer function activation: Not used, used Timer operation : Value %, Blinking Timer/toggle change-over activation: Not used, used Timer duration modifiable through object “Timer duration”: Enabled, Disabled Timer duration : h, min, s Tripping delay: Disabled, h, min, s Switching delay: Disabl

17、ed, h, min, s Cut-OFF pre-warning: Disabled, h, min, s Cut-OFF pre-warning duration: h, min, s Timer interruption : Interruptible timer, Non-interruptible timer Timer retriggerable : Yes, No Timer duration extension: No limitation, 1 to 5 time duration extension Time limited toggle switch activation

18、: Enabled, Disabled Time limited toggle switch duration: h, min, s Operating hours counter activation: Enabled, Disabled Relay status for operating hours counter: Normally closed, normally open Operating hours counter direction: Incremental counter, decremental counter Operating hours counter set po

19、int value: 1 65535 h Operating hours counter set point value modifiable through “Operating hours counter set-point” object: Enabled, Disabled Emission of the “Operating hours counter value” object: Not used, periodically Time for periodical emission of the “Operating hours counter value” object: h,

20、min, s,Basic functions,ON/OFF,Timer,Timer / Toggle change-over,Time limited toggle switch,Timer duration,Hours counter value,Hours counter setpoint,Reset hours counter,Hours counter setpoint reached,Scene,Restore scene,Dimming,Brightness value %,調光模塊：參數詳解2,Duration of brightness value 1 during blink

21、ing function: h, min, s Brightness value 1 during blinking function : 0100 %, 101% = Last value Dimming speed for Brightness value 1 during blinking function: 0100 %, 101% = Last value Duration of brightness value 2 during blinking function: h, min, s Brightness value 2 during blinking function : 01

22、00 %, 101% = Last value Dimming speed for Brightness value 2 during blinking function: 0100 %, 101% = Last value Output status emitted during Blinking function: ON, OFF, ON/OFF Preset function activation: Disabled, Preset 1-Level, Preset 2-Level Activation of Preset authorization objects: Yes, No Po

23、larity of Preset 1/2 authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorized Output status if preset object 1/2 = 1: Unchanged, Invert status, Value %, Scene X, Blinking, Status before Preset object =”0” Output status if preset object 1/2 = 0: Unchanged, Invert st

24、atus, Value %, Scene X, Blinking, Status before Preset object =”1” Activation of Scene function: Enabled, Disabled Number of scenes displayed: 8, 16, 24, 32, 64 Status for Scene X : Value %, Blinking, Not concerned Brightness value for scene X: 0100 %, 101% = Last value Dimming speed for scene X: h,

25、 min, s Scene memorization by long press on ambient push button: Enabled, Disabled Scene memorisation acknowledgment: Enabled, Disabled Restore ETS-parameters settings object activation: Enabled, Disabled Overwrite of Scene, timer and operating hours counter value at next download: Enabled, Disabled

26、 Switching ON by long press: Enabled, Disabled Switching OFF by long press: Enabled, Disabled,Basic functions,Preset 1,Preset 2,Autorisation Preset 1,Autorisation Preset 2,Scene,Restore scene,調光模塊：參數詳解3,Status ON/OFF activation: Enabled, Disabled Polarity of Status object ON/OFF: 0 = OFF ; 1 = ON, 0

27、 = ON ; 1 = OFF Emission of Status object ON/OFF: On change, Periodically, On change and periodically Time for periodical emission of the Status object ON/OFF: h, min, s Emission of Status object during manual mode : Enabled, Disabled Time delay for emission of “ON/OFF Status” objects after bus powe

28、r cut: h, min, s Brightness value indication activation : Enabled, Disabled Emission of Brightness value indication object: On change, Periodically, On change and periodically Time for periodical emission of the of Brightness value indication object: h, min, s Emission of of Brightness value indicat

29、ion object during manual mode : Enabled, Disabled Time delay for emission of Brightness value indication object after bus power cut: h, min, s Brightness value during bus power cut: Unchanged, 0100 %, 101% = Last value Brightness value at bus power return: Unchanged, 0100 %, 101% = Last value Bright

30、ness value during and after ETS download: Unchanged, 0100 %, 101% = Last value Maintenance object activation: Not used, used Emission of Maintenance object: On change, Periodically, On change and periodically Time for periodical emission of the Maintenance object: h, min, s Load type function activa

31、tion: Enabled, Disabled Load type detection function: Automatic, CFL, LED, Inductive loads, Energy saving load Load type object activation: Enabled, Disabled Load type detection problem object emission on the bus: Enabled, Disabled Overload indication object activation: Enabled, Disabled Overvoltage

32、 indication object activation: Enabled, Disabled Short circuit indication object activation: Not used, used Over-temperature indication object activation: Not used, used Load default indication object activation: Not used, used,Basic functions,Brightness value %,Output status ON/OFF,Load type,Start

33、load type detection process,Load type detection problem,Overload,Short circuit,Over temperature,Load default,Diagnosis,Overvoltage,窗簾模塊：參數詳解1,Closing type: Shutter, shutter and blind Complete Up movement duration: h, min, s Complete Down movement duration: h, min, s Time delay for direction inversio

34、n: Sec, Milliseconds Secured down function: Not used, Used Relay closing time for slat positioning: s, ms Total number of slat angles: 1 50 Preset function activation: Disabled, Preset 1-Level, Preset 2-Level Activation of Preset authorization objects: Yes, No Polarity of Preset 1/2 authorization ob

35、ject: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorized Position if preset object 1/2 = 1: Unchanged, Stop, UP, Down, specific position, Scene X, Activate sun protection, Deactivate sun protection, Status before Preset object =”0” Output status if preset object 1/2 = 0: Unchanged

36、, Stop, UP, Down, specific position, Scene X, Activate sun protection, Deactivate sun protection, Status before Preset object =”1” Activation of Scene function: Enabled, Disabled Number of scenes displayed: 8, 16, 24, 32, 64 Position for Scene X : Up, Down, Specific position, Not concerned Specific

37、Position for Scene X: 0100 % Slat angle for Scene X: 0100 % Scene memorization by long press on ambient push button: Enabled, Disabled Scene memorisation acknowledgment: Enabled, Disabled Restore ETS-parameters settings object activation: Enabled, Disabled Overwrite of Scene at next download: Enable

38、d, Disabled Activation of Diagnosis object: Enabled, Disabled Emission of Diagnosis object: On change, Periodically, On change and periodically Time for periodical emission of the Diagnosis object: h, min, s Status indication activation: Enabled, Disabled Object Position / Slat angle indication %: E

39、nabled, Disabled Emission of objects position / slat angle indication in %: On change, Periodically, On change and periodically Time for periodical emission of the objects position / slat angle indication in % objects : h, min, s,Basic functions,UP/DOWN,Step/Stop,Position in %,Slat angle in %,Preset

40、 2,Scene,Restore scene,Preset 1,Author. Preset 1,Author. Preset 2,Position in %,Slat angle in %,Diagnosis,窗簾模塊：參數詳解2,Object Status Upper/Lower position indication: Enabled, Disabled Polarity of Status objects Upper and Lower position indication: 0 = Upper/lower position reached ; 1 = Upper/lower pos

41、ition not reached 0 = Upper position not reached ; 1 = Upper position reached Emission of objects Upper/lower position indication: On change, Periodically, On change and periodically Time for periodical emission of the objects Upper/lower position indication objects: h, min, s Position during bus fa

42、ilure: Unchanged, UP, Down Status at bus power return: Unchanged, UP, Down, Specific position, Scene X Status during download: Unchanged, UP, Down Status after download: Unchanged, UP, Down, Specific position, Scene X Emission of Status objects during manual mode: Enabled, Disabled Activation of sun

43、 protection function: Disabled, Enabled with only position object, Enabled with only Slat angle object, Enabled with Position and slat angle objects Sun protection deactivated after local control: Enabled, Disabled Control(s) allowed deactivating sun protection: Up/down control, Step/stop control, U

44、p/down and Step/stop controls, All basic function controls. Sun protection deactivation type: Permanent, time limited Duration of sun protection deactivation: h, min, s Activation of sun protection authorization object: Enabled, Disabled Polarity of the sun protection authorization object: 0 = not a

45、uthorized; 1 = authorized 0 = authorized; 1 = not authorized Activation of sun protection status object: Enabled, Disabled Polarity of sun protection status object: “0” = Sun protection function deactivated, “1” = Sun protection function activated” “0” = Sun protection function activated, “1” = Sun

46、protection function deactivated” Emission of Sun protection status object: On change, Periodically, On change and periodically Time for periodical emission of the “Sun protection status” object: h, min, s Status at the end of sun protection: Unchanged, UP, Down, Specific position, Scene X, Position

47、before Sun protection, Theoretical position after Sun protection,Basic functions,Sun protection Position in %,Sun protection Slat angle in %,Sun protection authorization,Sun protection reactivation,Sun protection status,Lower position reached,Upper position reached,課堂練習題,1、復習編程基礎，完成簡單的調光、開關的場景功能 2、強

48、化開關的各項功能，例如on/off object timing，switching delay tripping delay 及timer/toggle switching changeover ，limited toggle switching等 2、復習Scene 1-bit功能，以及對應的新名稱Preset 3、熟悉Group Monitor/Bus Monitor的操作，能夠熟練讀取Monitor中顯示的數據。 4、熟悉通過Write Value給相印的組地址賦值。 5、調光 load default功能測試。 6、測試不同種類的光源在與調光器連接時的調光效果，通過手動切換調光類型觀察

49、有什么變化，連接功率擴展模塊測試調光效果,課堂練習題,1、完成以下場景，按鍵1為場景1，按鍵2為場景2 通過Preset功能一鍵（按鍵3）控制場景1和場景2的切換 2、通過Scene memorisation 功能，使場景1變?yōu)?3、通過Restore scene功能恢復原先的場景1功能 4、 通過Group Monitor/Bus Monitor觀察部分“人為故障報警”、窗簾到頂?shù)降追答仯ɡ纾嚎偩€掉線故障、負載故障等。）,優先級次序,Shutter/Blind窗簾/百葉,優先級次序,On/Off, Dimmer 1 = manual mode activated 0 = Manual mo

50、de activated; 1 = manual mode deactivated Emission of the “Manual mode status” object: On change, Periodically, On change and periodically Time for periodical emission of the “Manual mode status” object: H, Min, Sec Position after manual mode : Unchanged, Up, Down, Scene X, Specific position, Positi

51、on before manual, Mode, Theoretical position after manual mode Unchanged , Invert status, ON, OFF, Status before manual mode, Theoretical status after manual mode Unchanged , Invert status, ON, OFF, Value %, Status before manual mode, Theoretical status after manual mode,Manual mode,Manual mode stat

52、us,Manual mode disabling,課堂練習題,1、分別給通過Group Monitor/Bus Monitor控制手動模式并監測反饋。 2、觀察手動模式的deactivation及其狀態反饋與模塊手動操作之間的關系。 目的： 1、熟悉Group Monitor/Bus Monitor的操作，能夠熟練讀取Monitor中顯示的數據。 2、熟悉通過Write Value給相印的組地址賦值。 3、熟悉新的手動模式，觀測手動模式在各種命令下的不同反饋，并討論其應用場合。,警報：參數詳解,Activation of Alarm function: Enabled, disabled Al

53、arm 1/2/3 type : Permanent, time limited Duration of alarm 1/2/3 function: h, min, s Position during alarm 1/2/3 function: Unchanged, UP, Down, Stop, Scene X, specific position Position after alarm 1/2/3 function: Unchanged, UP, Down, Scene X, specific position, Position before super alarm function,

54、 Theoretical position after super alarm function Priorization between alarms 1/2/3: Alarm 1 Alarm 2 Alarm 3 Alarm 1 Alarm 3 Alarm 2 Alarm 2 Alarm 1 Alarm 3 Alarm 2 Alarm 3 Alarm 1 Alarm 3 Alarm 1 Alarm 2 Alarm 3 Alarm 2 Alarm 1 Activation of Alarm status object: Enabled, Disabled Polarity of Alarm s

55、tatus object: 0 = Manual mode deactivated; 1 = manual mode activated 0 = Manual mode activated; 1 = manual mode deactivated Emission of Alarm status object: On change, Periodically, On change and periodically Time for periodical emission of Alarm status object: H, Min, Sec Activation Alarm monitorin

56、g period: Enabled, disabled Alarm monitoring period duration: h, min, s,Alarm,Alarm 1,Alarm 2,Alarm 3,Alarm status,應用場合 只存在于窗簾/百葉模塊 將窗簾/百葉設置于特定的位置 通過氣象感應將窗簾/百葉置于保護模式,Activation of priority function: Enabled, Disabled Activation of Priority function status object: Enabled, Disabled Polarity of priori

57、ty function status object: 0 = Priority function deactivated; 1 = Priority function activated 0 = Priority function activated; 1 = Priority function deactivated Emission of the “Priority function status” object : On change, Periodically, On change and periodically Time for periodical emission of pri

58、ority status object: H, Min, Sec Position after priority : Unchanged, UP, Down, specific position, Scene X, Position before priority function, Theoretical position after priority function Unchanged , Invert status, ON, OFF, Status before manual mode, Theoretical status after priority Unchanged , Invert status, ON, OFF, Value %, Status before manual mode, Theoretical status after priority,Priority function,Priority,Priority function status,優先級控制：參數詳解,Lock-Up,Lock-Up鎖定應用場合 用于通過一個高優先級的命令鎖定一個輸出的普通控制功能 鎖定期間忽略給該對象的普通控制信號,Logic Block邏輯塊應用場合 通過比較不同的1-bit信號源，計算出一個需要的邏輯結果 一個模塊含有2個邏輯塊（2 lo