游戲側衛控制.doc

Flanker2.5側衛游戲中英文對照鍵盤命令Key鍵盤Action功能PROGRAM CONTROL游戲控制Ctrl-QEnd mission or Quit program from Main Menu結束任務，在主菜單時退出游戲EscSuspend mission or stop playback (Allows user to take control of aircraft while viewing a track file playback)暫停任務或停止回放（允許玩家在觀看飛行記錄文件時獲取飛行控制）Ctrl-SToggle Sound On or Off游戲聲音開關0Turns on microphone for recording mission playback在任務錄像中打開麥克風Ctrl-AAccelerate program speed by 2 times讓游戲的速度提高兩倍SToggle Pause/Resume normal speed/Launch model time at mission start ATTENTION! ANY SINGLE-PLAY MISSION STARTS IN PAUSE MODE. PRESS “S” TO START MODEL TIME!暫停/恢復游戲（回到正常速度）注意！所有的單人任務開始時都處于暫停狀態，要按“S”鍵開始任務Ctrl-MChat feature for multi-player network games在多人連線聊天FLIGHT CONTROL飛行控制Down ArrowNose up抬高機頭Up ArrowNose down壓低機頭Left ArrowBank left向左轉彎Right ArrowBank right向右轉彎Ctrl-. (Period)Trim up向上配平Ctrl-; (Semi-colon)Trim down向下配平Ctrl-, (Comma)Trim left向左配平Ctrl-/ (Slash)Trim right向右配平ZRudder left (in flight), left turn (taxi)左舵（飛行時），左轉（滑行時）XRudder right (in flight), right turn (taxi)右舵（飛行時），右轉（滑行時）Ctrl-ZTrim left rudder配平左舵Ctrl-XTrim right rudder配平右舵HToggle altitude stabilization mode高度穩定模式開關Shift-MReset Current Audible Warning重置當前聲響警告Ctrl-LToggle on-board lights飛機燈開關Alt-VToggle immortality mode for own plane (doesnt work in network and in protected missions)無敵開關（不要在聯網和保護任務中使用）KExecute “Pugachevs Cobra”解除仰角限制（飛普加喬夫眼鏡蛇機動時用）USetting your plane to the takeoff site on the carrier在航母上讓你的飛機處于起飛位置Ctrl-TCancel Trim Settings取消配平THROTTLE CONTROL節流閥控制JToggle auto-throttle鎖定速度，油門自動控制開關Page UpIncrease Throttle in increments快速加大油門Page DownDecrease Throttle in increments快速減少油門Key Pad + (Plus)Increase Throttle smoothly平穩地加大油門Key Pad - (Minus)Decrease Throttle smoothly平穩地減少油門MECHANICAL SYSTEMS CONTROL機械系統控制BToggle airbrake減速板收放開關Shift-BAirbrake out打開減速板Ctrl-BAirbrake in收起減速板Ctrl-E,E,EEject (Note: hold down Ctrl key and hit E three times)彈射（注意：要按住Ctrl鍵，按E鍵三次）EToggle active jamming (requires ECM pods in loadout)雷達干擾開關（要求外掛電子對抗吊艙）FToggle flaps up/down襟翼收放開關Shift-FFlaps down放下襟翼Ctrl-FFlaps up收起襟翼GToggle landing gear up/down起落架收放開關Ctrl-GToggle arrestor hook down or up (Note: Su-33and MiG-29k only, not Su-27)著艦勾收放開關（注意：只對Su-33和Mig-29k有效）PRelease drogue chute (Note: Su-27 only, not Su-33 and MiG-29k)釋放阻力傘（注意：只對Su-27有效）Ctrl-PToggle folding wings (Note: Su-33 and MiG-29k only, not Su-27)機翼折疊開關（注意：只對Su-33和Mig-29k有效LDump fuel (in flight) or refuel (ground) (Note: Hold down key)放油（在空中）或加油（在地面）（注意：要按住鍵）Alt-LJettison fuel tanks拋棄副油箱(聯網時千萬別干)WEngage wheel brakes (ground) (Note: Hold down key)機輪剎車（只在地面有效）（注意：要按住鍵）TToggle wingtip smoke翼尖拉煙開關RToggle refueling boom (Su-33 and MiG-29k only)空中受油管伸縮開關（只對Su-33和Mig-29k有效NAVIGATION導航 (Tilde)Select next waypoint or airfield選擇下一個導航點或機場AToggle auto-pilot自動駕駛開關1(大數字鍵)Toggle to set Navigation (NAV) modes導航模式開關（有四種模式循環選擇）COMBAT MODES戰斗模式2Toggle to set Beyond Visual Range (BVR/DVB) mode打開超視距空戰模式3Select Close Air Combat Vertical Scan (CAC/BVB VS) mode近距離空戰模式垂直掃描模式4Select Close Air Combat Bore (CAC/BVB BORE/STR) mode近距離空戰模式孔徑模式5Select Close Air Combat Helmet-Mounted Target Designator (CAC/BVB HMTD/SHLEM) mode近距離空戰模式頭盔瞄準模式6Select Longitudinal Missile Aiming (LNGT/FIO) mode導彈縱向瞄準模式7Select Air-to-ground (GND/ZEMLYA) mode空對地模式8Select GRID/CETKA HUD modeGRID/CETKA HUD模式 (Tilde)Cycle through targets (Cycle through targets on MFD in AWACS and Ground Attack Modes)循環切換目標（在AWACS和對地攻擊模式下循環切換MFD中的目標）TABLock selected target (Turn on tracked target)鎖定所選目標（在跟蹤目標時）Ctrl-TABTurn off tracked target取消跟蹤鎖定的目標TABLock target鎖定目標TABTurn on/off tracked target in Close Air Combat modes在近距離空戰模式中找開/取消跟蹤目標Ctrl-HCycle through Heads Up Display (HUD) intensities循環調節平顯的亮度WEAPONS武器DCycle through weapons selection循環選擇武器CToggle cannon機炮開關QDispense chaff & flare釋放雷達及紅外干擾Shift-QContinuously dispense chaff & flares (until supply is exhausted)保持釋放雷達及紅外干擾（直到干擾釋放完為止）Spacebar空格鍵Fire current weapon發射當前選定的武器Ctrl+WJettison weapons (in pairs) while airborne, reloads weapons while on the ground在空中時成對拋棄武器，在地面時重新裝彈(聯網時不要拋棄武器)Ctrl-VToggle Salvo mode on or off齊射開關RADAR & ELECTRO-OPTICAL SYSTEMS雷達與光電系統TToggle radar illumination on or off雷達照射開關OToggle Electro-Optical System (EOS) on or off光電系統開關Ctrl-ICenter radar antenna/Infra-Red Scan and Track(ISRT) ball雷達和紅外掃瞄跟蹤球置中- (Minus)Multi-Functional Display (MFD) zoom in多功能顯示器放大+ (Plus)Multi-Functional Display zoom out多功能顯示器縮小BEYOND VISUAL RANGE MODE超視距空戰模式Shift-; (Semicolon)Move radar/EOS scan zone UP雷達/光電系統向上掃瞄Shift-, (Comma)Move radar/EOS scan zone LEFT雷達/光電系統向左掃瞄Shift-. (Period)Move radar/EOS scan zone DOWN雷達/光電系統向下掃瞄Shift-/ (Slash)Move radar/EOS scan zone RIGHT雷達/光電系統向右掃瞄-; (Semicolon)Move HUD target designator Box DOWN (BVR only)平顯目標指示框下移（只在超視距空戰中有效）-, (Comma)Move HUD target designator Box LEFT (BVR only)平顯目標指示框左移（只在超視距空戰中有效）-. (Period)Move HUD target designator Box UP (BVR only)平顯目標指示框上移（只在超視距空戰中有效）-/ (Slash)Move HUD target designator Box RIGHT (BVR only)平顯目標指示框右移（只在超視距空戰中有效）CLOSE AIR COMBAT MODE近距離空戰模式Shift-; (Semicolon)Move radar/EOS scan zone UP雷達/光電系統向上掃瞄Shift-, (Comma)Move radar/EOS scan zone LEFT雷達/光電系統向左掃瞄Shift-. (Period)Move radar/EOS scan zone DOWN雷達/光電系統向下掃瞄Shift-/ (Slash)Move radar/EOS scan zone RIGHT雷達/光電系統向右掃瞄GROUND MODE對地攻擊模式Shift-; (Semicolon)Move radar/TV seeker scan zone UP雷達/電視制導頭向上掃瞄Shift-, (Comma)Move radar/TV seeker scan zone LEFT雷達/電視制導頭向左掃瞄Shift-. (Period)Move radar/TV seeker scan zone DOWN雷達/電視制導頭向下掃瞄Shift-/ (Slash)Move radar/TV seeker scan zone RIGHT雷達/電視制導頭向右掃瞄WINGMAN COMMANDS僚機指令EndDispatch wingman on mission and allow him to return to base afterwards在任務中派遣僚機并允許他完成任務后返回基地DelDispatch wingman on mission. On mission completion, join up在任務中派遣僚機并允許他完成任務后歸隊HomeJoin up in formation加入編隊InsToggle tight formation or loose formation密集/松散編隊開關Attack my target攻擊我的目標Cover my six oclock (rear) position掩護我六點鐘方向Call wingman commands dialog顯示對僚機指令VIEW SELECTION視角選擇F1Cockpit View座艙視角Ctrl-F1Natural Head Movement View頭部自然轉動視角F2External View All Aircraft外部視角所有飛機F3Fly-By View飛越視角F4Chase View追蹤視角F5Air Combat View (Cycles through locked enemy planes around the current plane from nearest to farthest. Looks at the enemy plane from the current plane and shows enemy data in the info string. Refreshes locking at every switch.)空戰視角(通過從近到遠循環鎖定觀察周圍的敵機，可以看到敵機的資料狀態)F6Weapons View武器視角(可循環觀察已發射的武器)Ctrl-F6Chase Weapon View (“Weapon To Target” View)追蹤武器視角（從武器到目標視角）F7Active Ground Objects View動態地面目標視角F8Target View循環觀察地面目標Ctrl-F8Target View Target to Your Aircraft目標視角從目標到你的座機Shift-F8Target View Your Aircraft to Target目標視角從你的座機到目標F9Ship View循環觀察艦船Alt-F9Landing Signal Officer (LSO) View著陸信號官視角F10Theater View戰區視角(地圖)F11Tower & Terrain View機場塔臺與地域視角(在11個機場間循環)Ctrl-F11Switches to Tower & Terrain View, saving current view position (freezing camera position). When switching from Theater View (F10) the current F11 camera position comes from the F10 camera position, but its altitude does not exceed 20km.切換到塔臺與地域視角，保存當前視點（凍結像機位置）。當從戰區視角（F10）切換到本視角，像機從F10視角的位置開始，但高度不能超過20公里F12Static Objects View靜態目標視角VIEW MODIFIERS視角修正Ctrl-HomePlaces external views to Friendly only只顯示友機的外部視角Ctrl-EndPlaces external views to Enemy only只顯示敵機的外部視角Ctrl-DeletePlaces external views to All顯示所有飛機的外部視角Ctrl-InsertPlaces external views to Unknown (non-aligned) only只顯示不明飛機的外部視角Keypad DelToggle Padlock View (Note: for F1, F2, F6, F7, F8, F9, Alt-F9 LSO View & F11 Tower View only)切換視角觀察點（只對F1, 1, F2, F6, F7, F8, F9, Alt-F9 和 F11有效）Alt-Keypad DelToggle Terrain Point Padlock View (Note: for F2, F6, F7, F8, F9 Views only)切換地形視角觀察點（只對F2, F6, F7, F8, F9有效）BackspaceToggle “From object/To object” camera direction mode (Note: for F2, F6, F7, F8, F9, F12 Views only)切換“從物體到物體”視角的觀察方向（只對F2, F6, F7, F8, F9, F12有效）Alt-DeleteExclude current object from the view switching視角轉換時忽視當前物體Alt-InsertInclude all excluded objects to the view switching把所有被忽視的物體加入視角Ctrl-PageUpReverse objects switching direction向后改變物體轉動的方向Ctrl-PageDownForward objects switching direction向前改變物體轉動的方向Ctrl Key Pad +(plus)Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4 Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY weapon now, not to bombs & missiles only!在F1,F2,F4,F7,F9視角中切換到武器發射與跟蹤視角。切換到除炸彈和導彈外的任一武器的視角Alt-Key Pad *Starts moving camera forward (F11Tower & Terrain View only)向前移動像機（只對F11有效）Alt-Key Pad /Starts moving camera backward (F11Tower & Terrain View only)向后移動像機（只對F11有效）Key Pad 5Stops moving camera (F11 Tower & Terrain View)停止移動像機（只對F11有效）Ctrl-Key Pad 5Returns to Tower & Terrain View starting point or ends Padlock View回到塔臺與地域視角（F11）的啟始點或終止點的視角Shift-DIncrease visible range of ground objects增加地面物體的可視范圍Ctrl-DDecrease visible range of ground objects減少地面物體的可視范圍YExternal View Information Display Toggle外部視角信息顯示開關Shift-YToggle Information Display upper lines信息顯示上部邊線開關Ctrl-YToggle Information Display under lines信息顯示下部邊線開關COCKPIT VIEW CONTROL座艙視角控制Key Pad 1Move head down and left向左下看Key Pad 2Move head down向下看Key Pad 3Move head down and right向右下看Key Pad 4Move head left向左看Key Pad 5Centers camera or stops padlock view視線回中，回到正常視角Key Pad 6Move head right向右看Key Pad 7Move head up and left向左上看Key Pad 8Move head up向上看Key Pad 9Move head up and right向右上看Key Pad DelEnters padlock view and cycle through targets進入鎖定視角并在目標中切換Ctrl Key Pad +(plus)Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4 Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY weapon now, not to bombs & missiles only!在F1,F2,F4,F7,F9視角中切換到武器發射與跟蹤視角。切換到除炸彈和導彈外的任一武器的視角MMove head to view right mirror看右邊后視鏡NMove head to view left mirror看左邊后視鏡Ctrl-JToggle joystick and rudder indication游戲桿和舵顯示開關Key Pad * (Asterisk)Zoom in (narrow view angle). With Shift Zoom in to limit放大同時按下Shift鍵即放到最大Key Pad / (Divide)Zoom out (enlarge view angle). With Shift Zoom out to limit縮小同時按下Shift鍵即縮到最小Key Pad EnterSet default zoom (default view angle).設置默認縮放(默認角度)EXTERNAL VIEW CONTROL外部視角控制Key Pad 1Rotate viewpoint down and left向左下旋轉觀察點Key Pad 2Rotate viewpoint down向下旋轉觀察點Key Pad 3Rotate viewpoint down and right向右下旋轉觀察點Key Pad 4Rotate viewpoint left向左旋轉觀察點Key Pad 5Centers view (stops F11 viewpoint moving)居中視角（停止F11觀察點的移動）Ctrl-Key Pad 5Returns to starting point (F11 Tower & Terrain View only)返回開始點（只對F11有效）Key Pad 6Rotate viewpoint right向右旋轉觀察點Key Pad 7Rotate viewpoint up and left向左上旋轉觀察點Key Pad 8Rotate viewpoint up向上旋轉觀察點Key Pad 9Rotate viewpoint up and right向右上旋轉觀察點Key Pad * (Asterisk)Zoom in (Move viewpoint forward)放大（從觀察點向前）Key Pad / (Slash)Zoom out (Move viewpoint back)縮小（從觀察點向后）Key Pad 0Jump to cockpit panel view and back (Note: Hold down then release)移到座艙面板視角并返回（注意：要按住，松開即返回）Shift-(all view keys)Moves viewpoints at a faster rate (Note: Hold down Shift and view key)快速移動觀察點（注意：按住Shift鍵再按下視角鍵）Ctrl-(Key Pad 1-9)Moves camera instead of rotate it.移動像機代替旋轉Mission Editor任務編輯器File文件菜單Ctrl-NCreate new mission file建立新任務文件Ctrl-OOpen mission file打開文件Ctrl-ASave mission file保存文件Alt-XExit Mission Editor and return to Main Menu退出任務編輯器回到主菜單Edit編輯菜單Ctrl-ZUndo last action撤消上一次操作Ctrl-YRedo last action (cancel previous Undo)恢復上一次操作DelDelete selected object清除所選的物件View顯示菜單Ctrl-HHide object隱藏物件Ctrl-1Crimean view瀏覽整個克里米亞半島Flight飛行菜單Ctrl-BDisplay Briefing顯示戰斗簡報Ctrl-FStart Mission開始任務Ctrl-LNetwork Play聯網對戰Ctrl-MChat in Network Play在聯網中對話Ctrl-RRecord Track File開始游戲并錄像注：Keypad指小鍵盤上的鍵Key鍵盤 功能 Ctrl-Q 結束任務，在主菜單時退出游戲 Esc 暫停任務或停止回放（允許玩家在觀看飛行記錄文件時獲取飛行控制） Ctrl-S 游戲聲音開關 0 在任務錄像中打開麥克風 Ctrl-A 讓游戲的速度提高兩倍 S 暫停/恢復游戲（回到正常速度）注意！所有的單人任務開始時都處于暫停狀態，要按“S”鍵開始任務Ctrl-M 在多人連線聊天 飛行控制 Ctrl-. 向上配平 Ctrl-; 向下配平 Ctrl-, 向左配平 Ctrl-/ 向右配平 Z 左舵（飛行時），左轉（滑行時） X 右舵（飛行時），右轉（滑行時） Ctrl-Z 配平左舵 Ctrl-X 配平右舵 H 高度穩定模式開關 Shift-M 重置當前聲響警告 Ctrl-L 飛機燈開關 Alt-V 無敵開關（不要在聯網和保護任務中使用） K 解除仰角限制（飛普加喬夫眼鏡蛇機動時用） U 在航母上讓你的飛機處于起飛位置 Ctrl-T 取消配平 節流閥控制 J 鎖定速度，油門自動控制開關 Page UP 快速加大油門 Page Down 快速減少油門 Key Pad + (Plus) 平穩地加大油門 Key Pad - (Minus) 平穩地減少油門 機械系統控制 B 減速板收放開關 Shift-B 打開減速板 Ctrl-B 收起減速板 Ctrl-E,E,E 彈射（注意：要按住Ctrl鍵，按E鍵三次） E 雷達干擾開關（要求外掛電子對抗吊艙） F 襟翼收放開關 Shift-F 放下襟翼 Ctrl-F 收起襟翼 G 起落架收放開關 Ctrl-G 著艦勾收放開關（注意：只對Su-33和Mig-29k有效） P 釋放阻力傘（注意：只對Su-27有效） Ctrl-P 機翼折疊開關（注意：只對Su-33和Mig-29k有效)L 放油（在空中）或加油（在地面）（注意：要按住鍵） Alt-L 拋棄副油箱(聯網時千萬別干) W 機輪剎車（只在地面有效）（注意：要按住鍵） T 翼尖拉煙開關 R 空中受油管伸縮開關（只對Su-33和Mig-29k有效 導航 選擇下一個導航點或機場 A 自動駕駛開關 1(大數字鍵) 導航模式開關（有四種模式循環選擇） 戰斗模式 2 打開超視距空戰模式 3 近距離空戰模式垂直掃描模式 4 近距離空戰模式孔徑模式 5 近距離空戰模式頭盔瞄準模式 6 導彈縱向瞄準模式 7 空對地模式 8 GRID/CETKA HUD模式 循環切換目標（在AWACS和對地攻擊模式下循環切換MFD中的目標） TAB 鎖定所選目標（在跟蹤目標時） Ctrl-TAB 取消跟蹤鎖定的目標 TAB 鎖定目標TAB 在近距離空戰模式中找開/取消跟蹤目標 Ctrl-H 循環調節平顯的亮度 武器 D 循環選擇武器 C 機炮開關 Q 釋放雷達及紅外干擾 Shift-Q 保持釋放雷達及紅外干擾（直到干擾釋放完為止） Spacebar空格鍵 發射當前選定的武器 Ctrl+W 在空中時成對拋棄武器，在地面時重新裝彈(聯網時不要拋棄武器) Ctrl-V 齊射開關 雷達與光電系統 T 雷達照射開關 O 光電系統開關 Ctrl-I 雷達和紅外掃瞄跟蹤球置中 - 多功能顯示器放大 + 多功能顯示器縮小 超視距空戰模式 Shift-; 雷達/光電系統向上掃瞄 Shift-, 雷達/光電系統向左掃瞄 Shift-. 雷達/光電系統向下掃瞄 Shift-/ 雷達/光電系統向右掃瞄 -; 平顯目標指示框下移（只在超視距空戰中有效） -, 平顯目標指示框左移（只在超視距空戰中有效） -. 平顯目標指示框上移（只在超視距空戰中有效） -/ (Slash) 平顯目標指示框右移（只在超視距空戰中有效） 近距離空戰模式 Shift-; 雷達/光電系統向上掃瞄 Shift-, 雷達/光電系統向左掃瞄 Shift-. 雷達/光電系統向下掃瞄 Shift-/ 雷達/光電系統向右掃瞄 對地攻擊模式 Shift-; 雷達/電視制導頭向上掃瞄 Shift-, 雷達/電視制導頭向左掃瞄 Shift-. 雷達/電視制導頭向右掃瞄 僚機指令 End 在任務中派遣僚機并允許他完成任務后返回基地 Del 在任務中派遣僚機并允許他完成任務后歸隊 Home 加入編隊 Ins 密集/松散編隊開關 攻擊我的目標 掩護我六點鐘方向 顯示對僚機指令 視角選擇 F1 座艙視角Ctrl-F1 頭部自然轉動視角 F2 外部視角所有飛機 F3 飛越視角 F4 追蹤視角 F5 空戰視角(通過從近到遠循環鎖定觀察周圍的敵機，可以看到敵機的資料狀態) F6 武器視角(可循環觀察已發射的武器) Ctrl-F6 追蹤武器視角（從武器到目標視角） F7 動態地面目標視角 F8 循環觀察地面目標 Ctrl-F8 目標視角從目標到你的座機 Shift-F8 目標視角從你的座機到目標 F9 循環觀察艦船 Alt-F9 著陸信號官視角 F10 戰區視角(地圖) F11 機場塔臺與地域視角(在11個機場間循環) Ctrl-F11 切換到塔臺與地域視角，保存當前視點（凍結像機位置）。當從戰區視角（F10）切換到本視角，像機從F10視角的位置開始，但高度不能超過20公里 F12 靜態目標視角 視角修正 Ctrl-Ho