棉表面的疏水性能

1、imparting waterproof properties to cotton surface abstractmethods are suggested and compositions are selected to endow the surfaces of textile goods made of cotton fabrics with waterproof properties. the wetting angles are measured that water drops form with the coatings, made of fluorosilanes of di

2、fferent structures, on the surfaces of cover glasses and fabric. it is shown that, if the aggregation of fluorosilane molecules takes place in the treated solution, then it is possible to achieve the superhydrophobicity of the cotton surface. 摘要采用的 方 法和選用的成分 都是為了使棉織物 表面具有疏水性能。 潤濕角是測量蓋玻 片和織物表面涂層 上水珠的

3、形態，該 涂層是由不同結構 的氟化硅烷制成的。 結果表明：若氟化 硅烷的集合體經過 一定的溶液處理， 那么棉織物的表面 就有可能實現超疏 水性。 introduction in recent years, interest in the investigation and production of highly hydrophobic and superhydrophobic surfaces has increased. thus, a survey of the literature using the database of the institute of statistical i

4、nformation (http:/ showed that the number of papers in this field published within two last years is almost twice that of the total number of publications over the entire previous period, 最近幾年，調查 和生產高疏水性 和超疏水性表面 的興趣大大增加。 通過對統計信息 研究所數據庫里 的文獻調查，結 果表明：最近兩 年在這個領域發 表的文獻的數量 幾乎是以前所有 出版物數量的兩 倍， which is mai

5、nly connected with the high demand in the obtained scientific results from most diverse industrial fields 15. one of the applied trends under current development that uses the achievements in the field of production of superhydrophobic surfaces is the creation of waterproof fabrics68. waterproof pro

6、perties are important for materials of different purposes, ranging from fabrics used to prepare tents, protective clothing, coats, and umbrellas to linen used to sew clothing for operation personnel. 這主要是與最多樣 化工業領域中對科 學的高需求有關1- 5。在目前發展狀 況下的一個應用趨 勢是：運用超疏水 表面生產領域中所 取得的成就是織物 疏水方面的創舉6- 8。對不同目的的 材料來說，如從帳

7、 篷、保護性布料、 外套、傘用的織物 到手術縫線用的麻 織物，疏水性能都 是非常重要的， an important advantage of imparting waterproof properties to a material by applying coatings is the opportunity to retain the texture, properties, density, and coloring of the basic fabric. at present, there are an insufficient number of methods and a res

8、tricted number of hydrophobic compounds that can be efficiently applied for textile goods. this work is intended to partially fill this gap. 賦予涂層材料疏水 性的一個重大的好 處是有機會保留原 織物的組織、性能、 密度和色澤。目前， 可以有效的應用于 紡織品疏水性的試 驗方法和疏水成分 是有限的。該文獻 在一定程度上填補 了這空缺。 materials the experiments were conducted with samples of cott

9、on fabric with a twill weave and a weight of130g/m2 and dimensions of 10 10 cm. the pretreatment of the specimens involved mercerization in a solution of sodium hydroxide, neutralization in acetic acid, and rinsing with distilled water. depending on the method of further processing, we used either w

10、et samples or samples dried for 24 h in a room with 5575% humidity. samples ：cotton fabric pretreatment： mercerization （絲光處理） neutralization （中合作用） rinsing （水洗） used samples to estimate the role of the roughness conditioned by the structure of a fabric weave and the effect of different hydrophobic a

11、gents on the wetting angles, as reference samples, we used cover glasses of russian production ( klin glass manufacturing plant) with a roughness that did not exceed 0.1 m (gost state standard 6672-75). the pretreatment of these glasses included washing in a chromic mixture, rinsing with distilled w

12、ater, and drying in a vacuum oven at 150. wetting angles pretreatment of glasses distilled water （蒸餾水） fabric processing two different methods were used to process the fabric. in the first procedure, to treat wet fabric and impart waterproof properties to its surface, the commercial sole of fluorofu

13、nctionalized siloxane of degussa production (germany) (hydrophobic agent no. 1) was used. the fabric sample was placed into a sole for 20 min and dried at 120 for an hour. then, the coating was cured for 1 min at 150. process the first procedure hydrophobic agent no. 1(憎 水劑1號） in the second procedur

14、e, the preliminary dried samples were immersed for different periods of time into 1% solution of cf3(cf2)5(c=o)nh(ch2)3si(c2 h5oh) in toluene (hydrophobic agent no. 2). fluorosilane was granted by prof. s. lee (skl, china). after solvent evaporation, the samples were dried in a vacuum oven at 110. b

15、oth of the mentioned compositions were applied to glass plates by the pouring method. the second procedure toluene(甲苯） hydrophobic agent no. 2（憎水劑2號） solvent evaporation(蒸發溶 劑） measurement of contact angles one of the main characteristics of the waterproof properties of a fabric is its wetting. wett

16、ing of both the glass samples and fabric surface after the application of the coatings was studied by measuring the contact angles of a sessile drop. on a special unit constructed at the frumkin institute of physical chemistry and electrochemistry, russian academy of sciences 9. an image of the sess

17、ile drop, 2009, vol. 45, no. 6, p. 713.whose volume was, as a rule, 4060 l, was obtained using a pl-b621mu monochrome digital video camera. a sessile drop(靜滴） monochrome（單色的） to analyze the data, three samples of each type were used; the average value of the angle for each sample was determined by f

18、ive different points. wetting of separate fabric fibers with solutions bearing a hydrophobizing substance was studied on the same unit using the method of a drop on a fiber 10. this method enables the simultaneous determination from a single experiment of both the outflow and inflow angles as the an

19、gles formed with the fiber surface by the receding and advancing angles of the drop hanging on a fiber. this method is described in detail in 10. this method enables the simultaneous determination from a single experiment of both the outflow and inflow angles as the angles formed with the fiber surf

20、ace by the receding and advancing angles of the drop hanging on a fiber. 通過對纖維的懸滴的后退和前進的角度，從一個單 一的實驗方法就能夠同時測定流出和流入的角度和 纖維表面形成的角度。 results and discussion to date, it has been theoretically shown and experimentally proven (for reviews on this problem, see 15, 11, 12) that an efficient contact angle on

21、 a rough surface is determined by the chemical composition of the surface and peculiarities of its relief. in order for the fabric to possess considerable waterproof properties that are stable over time, the fiber surface must be hydrophobic. at the same time, most natural fabrics used in textile in

22、dustry are hydrophilic and rapidly absorb water drops falling on their surfaces (see fig. 1). (a) complete wetting of an untreated fabric, fig. 1. wetting of the fabric samples in the present work, to impart hydrophobic properties, we used the two different hydrophobic agents described above. to est

23、imate their hydrophobizing ability, we first studied the wetting angles of the smooth cover glasses processed via the abovementioned procedures of applying a hydrophobic coating. table 1 lists the values of wetting angles measured on the glasses after the coating was applied. the presented data indi

24、cate that both of the chosen hydrophobic agents have good hydrophobizing ability. the fact that, after treatment with fluorofunctionalized siloxane of the degussa corporation, the contact angle on the smooth cover glass exceeds 120 implies that the coating does not represent a smooth film. based on

25、the analysis performed in 2, one may suppose that the coating formed on the glass represents a layer with an expressed relief. this is confirmed by the data of atomic- force microscopy of the surface of the glass with a coating. the relief visible in the asm image (fig. 2) is mainly associated with

26、the formation of nanosized aggregates of hydrophobic agent molecules. the considerable dispersion in the wetting angles substantiates this conclusion. atomic-force microscopy（微粒子能） dispersion（分散作用） substantiates（證實、證明） the coating applied by pouring a toluene solution of the second hydrophobic agent

27、 also yields a relatively high contact angle, which indicates good hydrophobizing ability. the small scatter of the measured angles along the sample surface allows one to consider an applied coating as rather uniform. the data on the contact angles that water drops form on the surface of a cotton fa

28、bric after treatment with both solutions are presented in table 1. water drops on fabric treated with both solutions are depicted in figs. 1b, 1c. the measured wetting angles and small roll-off angles, which do not exceed 15。,unambiguously indicate the achievement of a superhydrophobic state of the

29、fabric treated with the hydrophobizing agent no. 1. at the same time, although fabric treated with the agent no. 2 is characterized by good water -resistance, it cannot be considered to be a fabric that possesses superhydrophobic properties. first of all, this is explained by a large wetting hystere

30、sis, which can be judged by the roll-off angles that, in some fragments of the fabric sample, reach 80. in addition, the fact that the contact angle for hydrophobizing agent no. 2 at small times of storage in solution depends on time and achieves a constant value at long times indicates the importan

31、ce of achieving adsorption equilibrium between hydrophobizing agent molecules on the fiber surface for the hydrophobization process. wetting hysteresis (潤濕滯后） adsorption equilibrium（平衡吸收作用） a comparison of the results on the hydrophobizing treatment of both the reference samples, which are smooth gl

32、asses, and the fabric samples allows one to connect the difference in the observed contact angles with the roughness of a hydrophobic covering. thus, there are several literature references 15, 1113 that indicate that, to reach a superhydrophobic state, the roughness with a number of typical sizes o

33、f the relief elements, e.g., bimodal texture, is required . in our case, the typical relief parameters are the fiber diameter and interfiber space, which is determined by the weave density. bimodal texture（雙峰組織） these parameters are the same for the samples that were treated with different hydrophob

34、ic agents. at the same time, in the case of the treatment with an aqueous solution of fluorofunctionalized siloxane of degussa production, a third typical parameter emerges in connection with the aggregation of the molecules in the sole and yields an angle of greater than 120, even on smooth cover g

35、lass. apparently, as a result of a combination of these three characteristic sizes of roughness, one can aqueous solution（水溶液） achieve a hydrophobic state on fabric treated with hydrophobizing agent no. 1. because the quality of the resulting covering can be determined to a great extent by the wetta

36、bility of the fabric fibers by the hydrophibizing solution, in the present work, using the method of a drop on a fiber, we measured the angles that are formed on the fiber surface by drops of the corresponding solutions. the data obtained is presented in table 2 and allows one to conclude that the d

37、ifference in the results of the hydrophobic treatment of the fabric cannot relate the to the different conditions of the contact of the cotton fabric and treating solution. conclusions in the present study, we suggested simple methods for treating a cotton- based fabric using both commercial and eas

38、ily synthesized hydrophobic agents that provide a stable water- resistant effect. the analysis of the wetting of the treated fabrics showed that the greatest effect that leads to a superhydrophobic state of the surface is achieved in the case when the surface relief of the fabric with a coating is d

39、etermined, not only by the structure and weave of the material itself, but also by additional 在目前的研究中，我 們利用簡單的試驗方 法對以棉為主的面料 采用了商業和容易合 成的憎水劑基團進行 處理，結果使棉面料 具有了穩定的抗水性 能。通過對處理的棉 織物的潤濕性分析， 結果表明：在表面涂 層面料確定的情況下， 面料的表面獲得了超 疏水性狀態的顯著效 果，不僅取決于材料 本身的結構和組織， 還取決于形成疏水性 化合物的集合體的粗 糙度方面。 reference 1. blossey, r., nat

40、ure mater, 2003, vol. 2, p. 301. 2. boinovich, l.b. and emelyanenko, a.m., usp. khim.,2008, vol. 77, no. 7, p. 619. 3. ma, m.l. and hill, r.m., curr. opin. colloid interfacesci., 2006, vol. 11, p. 193. elements of the roughness that are formed by the aggregates of hydrophobic compounds. the compleme

41、nt of the surface microroughness conditioned by the fiber weave with the nanosized roughness of the aggregates allows one to achieve the level of roughness required to obtain small roll-off angles and wetting angles above 150. 聚合的納米纖 維組織粗糙度 表面微粗糙度 的補充，可以 實現要求的小 卷曲角和潤濕 角在150。以上 粗糙度的水平。 4. extrand, c.

42、, encyclopedia of surface, colloid science,somasundaran, p., ed., new york: taylor and francis, 2006, p. 5854. 5. nakajima, a., hashimoto, k., and watanabe, t.,monatsh. chem., 2001, vol. 132, p. 31. 6. wang, t., hu, x., and dong, sh., chem. commun.,2007, p. 1849. 7. tomsic, b., simoncic, b., orel, b., et al., j. sol-gel.sci. technol., 2008, vol. 47, p. 44. 8. lee, h.