DHT11測溫濕度程序lcd1602顯示

1、DHT11測溫濕度程序lcd1602 顯示#include<reg52.h>#include<intrins.h>#define uchar unsigned char #define uint unsigned int #define DataP0 / 數據端口sbit RS=P24;sbit RW=P25;sbit E=P26;sbit DHT=P10;uchar FirstLine ="wen:00.00" /第一行數據uchar SecondLine="shi:00.00" /第二行數據unsigned char shiZ

2、,shiX,wenZ,wenX,check;unsigned char tr_shiZ,tr_shiX,tr_wenZ,tr_wenX;unsigned char flag;unsigned int n=20,m;void delay_1ms(unsigned int i) unsigned int j=88;for(;i>0;i-)while(j>0)j-;void delay_10us()unsigned char i;i-;i-;i-;i-;i-;i-;/*/*溫濕度讀取函數 */*/char read_data()unsigned char i,num,temp;num=0

3、;for(i=0;i<8;i+)flag=2;while(!DHT)&&flag+);delay_10us();delay_10us();delay_10us();if(DHT=1)temp=1;flag=2;while(DHT&&flag+);elsetemp=0;num<<=1;num|=temp;return(num);void delay(uchar ms) /延時函數uchar i,j;for(i=ms;i>0;i-) for(j=100;j>0;j-); ms毫秒void DelayUs(unsigned char us

4、) /-延時函數unsigned char uscnt;uscnt=us>>1; /*12MHz頻率 */while(-uscnt); void DelayMs(unsigned char ms)while(-ms)DelayUs(250);DelayUs(250);DelayUs(250);DelayUs(250);void lcd_write_com(uchar c) /寫命令 DelayMs(5);/操作前短暫延時，保證信號穩定E=0;RS=0;RW=0;_nop_();E=1;Data=c;E=0;void lcd_write_dat(uchar c) /寫數據 Delay

5、Ms(5); /操作前短暫延時，保證信號穩定E=0;RS=1;RW=0;_nop_();E=1;Data=c;E=0;RS=0;void lcd_init() /LCD初始化DelayMs(15);lcd_write_com(0x38); /display modelcd_write_com(0x38); /display modelcd_write_com(0x38); /display modelcd_write_com(0x06); /顯示光標移動位置lcd_write_com(0x0c); /顯示開及光標設置lcd_write_com(0x01); /顯示清屏void ShowChar

6、(uchar pos,uchar c) /顯示單個字符unsigned char p;if (pos>=0x10)p=pos+0xb0; /是第二行則命令代碼高4 位為0xcelsep=pos+0x80; /是第二行則命令代碼高4 位為0x8lcd_write_com(p);/寫命令lcd_write_dat(c); /寫數據void ShowString (uchar line,char *ptr) /unsigned char l,*p;顯示字符串p=ptr;l=line<<4;while(*p)!='0')ShowChar(l+,*(p);p+;void

7、 disp(void) /主函數調用的顯示函數ShowString(0,FirstLine);ShowString(1,SecondLine); /*/*初始化及采集程序 */*/void read_init()DHT=0; / 主機使 DHT11低電平并延時至少18msdelay_1ms(21);DHT=1; / 主機置 DHT11高電平 2040us, 并等待從機相應delay_10us();delay_10us();delay_10us();delay_10us();DHT=1;if(!DHT) /從機發出相應信號flag=2;while(!DHT)&&flag+);fl

8、ag=2;while(DHT&&flag+); /開始采集數據tr_shiZ=read_data();/采集濕度整數部分tr_shiX=read_data();/采集濕度小數部分tr_wenZ=read_data();/采集溫度整數部分tr_wenX=read_data();/采集溫度小數部分check=read_data(); /采集校驗位DHT=1;void main()unsigned char temp;lcd_init();delay(50);while(1)disp();read_init();temp=tr_shiZ+tr_shiX+tr_wenZ+tr_wenX;if(check=temp)shiZ=tr_shiZ;shiX=tr_shiX;wenZ=tr_wenZ;wenX=tr_wenX;FirstLine4='0'+wenZ/10;FirstLine5='0'+wenZ%10;FirstLine8='0'+wenX/10;FirstLine9='0'+w