產(chǎn)品3g模塊sim5210非主流v

1、Hardware DesignSIM5210_HD_V1.95SIM5210 Hardware DesignGeneral NotesSIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCo

2、m by the customers. SIMCom has notundertaken any independent search for additional relevnformation, including any informationthat may be in the customers possession. Furthermore, system validation of this product designedby SIMCom within a larger electronic system remains the responsibility of the c

3、ustomer or thecustomers system integrator. All specificationsd herein are subject to change.CopyrightThis document contains proprietary technical information which is the property of SIMCOM Limited., copying of this document and giving it to others and the using or communication of the contents ther

4、eof, are forbidden without express authority. Offenders are liable to the payment ofdamages.or design. All specificationin the event of grant of a patent or the registration of a utility md herein are subject to change without notice at any time.Copyright © Shanghai SIMCom Wireless Solutions. 2

5、009SIM5210_HD_V1.95213.02.2009Document Title:SIM5210 Hardware DesignVersion:1.95Date:2009-02-13Status:ReleaseDocument Control ID:SIM5210_HD_V1.95SIM5210 Hardware DesignContentsVersion history51 Introduction61.1 Related documents61.2 Terms and abbreviations72 Product concept103 Application interface1

6、43.1 SIM5210 pin description143.2 Operating modes163.3 Power supply183.3.1 Power supply pins on th-to-board connector193.3.2 Minimizing power losses193.3.3 Monitoring power supply193.4 Power up and power down scenarios193.4.1 Turn on SIM5210193.4.2 SIM5210 Auto Power ON203.4.3 Turn off SIM5210203.5

7、Power saving213.5.1 Minimum functionality mode213.5.2 Flight mode223.5.3 Sleep mode233.5.4 Wake up SIM5210 from SLEEP mode233.6 RTC backup233.7 Serial interfaces253.7.1 Function of serial port supporting263.8 Audio interfaces273.8.1 Speaker interface configuration283.8.2 Microphone interfaces config

8、uration293.8.3 Earphone interface configuration293.8.4 Referenced electronic characteristic303.8.5 Programcharacteristic303.9 USIM card interface343.9.1 USIM card application343.9.2 Design considerations for USIM card holder353.10 I2C interface363.11 USB interface373.12 MODULE RESET383.13 General pu

9、rpose input & output (GPIO)384 Antenna interface404.1 Antenna installation404.1.1 Antenna connector404.1.2 Antenna pad40SIM5210_HD_V1.95313.02.2009SIM5210 Hardware Design4.2 Module RF output power414.3 Module RF receive sensitivity414.4 Module operating frequencies415 Electrical, reliability and

10、 radio characteristics425.1 Absoluteum ratings425.2 Operating temperatures425.3 Power supply ratings435.4 Current consumption435.5 Electro-Static discharge446 Mechanics456.1 Mechanical dimensions of SIM5210456.2 Mounting SIM5210 onto the application platform456.3 Board-to-board connector456.3.1 Mech

11、anical dimensions of the NAIS AXK770347WG466.4 RF connector and adapter cable466.5 view of the SIM5210486.6 PIN assignment of board-to-board connector of SIM521048SIM5210_HD_V1.95413.02.2009SIM5210 Hardware DesignVersion historySIM5210_HD_V1.95513.02.2009DateVersionDescription of changeAuthor2006-12

12、-1201.00OriginDingyiru2007-06-2901.10Delete some functionDingyiru2007-09-2501.11Correct some errorDingyiru2007-10-2901.12Add the backup battery and delete the Acc_detectDingyiru2007_11_2601.201: Table 14, pin define changed.2: Add the GPIO 25 define On PCM PINsDingyiru2008_01_1801.301: Revise to a s

13、tandard version 2: add RF control pinJiajun,Wubin2008_02_2701.40Change GPIO0 interrupt level: from high to low levelWubin2008_03_0501.501. Update Mechanical picture,2. Add hyperterminer default setting picture.menggengshe ng2008_03_2101.60Add 230400 and 460800 bps support for serial port.wubin2008_0

14、5_2701.70Add voice band characteristics. 3.8.5wubin2008_06_2501.80Modified the USB receptacleaaron2008_07_2401.90Description error modification in 3.3.3. two parameters Modified pin 23 and pin 24 definitionWubin2008_08_2201.91Modification for structure revision. USB definition error in table 5.Wubin

15、2008_09_0301.92UART RTS/CTS direction error in table 5.Wubin2008_10_2701.93Add 3.8.5.4 for sound level change, CVLVL. Modify table 12 and table 13Wubin2008_12_1001.94Modify table 12 and table 13，figure 13Wubin2009_02_1301.95Add a note to the Serial interface chapteraaronSIM5210 Hardware Design1 Intr

16、oductionThis document describes the hardware interface of the SIMCOM SIM5210 module that connectsto the specific application and the air interface. As SIM5210 can be integrated with a wide rangeof applications, all functional components of SIM5210 are described in great.This document can help you qu

17、ickly understand SIM5210 interface specifications, electrical andmechanicals. With the help of this document and other SIM5210 application notes, userguide, you can use SIM5210 module to design and set-up mobile applications quickly.1.1 Related documentsTable 1: Related documentsSIM5210_HD_V1.95613.

18、02.2009SNDocument nameRemark1SIMCOM_SIM5210_ATC_EN.pdfSIMCOM ATd document for module SIM5210, English languageSerial asynchronous automatic dialing and controlDigital cellular telecommunications (Phase 2+); ATd set for GSM Mobile Equipment (ME)Support GSM 07.10 multiplexing protocol23ITU-TDraftnew r

19、ecommendationV.25ter:GSM 07.07:4GSM 07.10:5GSM 07.05:Digital cellular telecommunications (Phase 2+); Use of Data Terminal Equipment Data Circuit terminating Equipment (DTE DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)6GSM 11.14:Digital cellular telecommunications sy

20、stem (Phase 2+); Specification of the SIM Application Toolkit for the Subscriber Identity Module Mobile Equipment (SIM ME) interface7GSM 11.11:Digital cellular telecommunications system (Phase 2+); Specification of the Subscriber Identity Module Mobile Equipment (SIM ME) interface8GSM 03.38:Digitalc

21、ellulartelecommunicationssystem(Phase2+); Alphabets and language-specific information9GSM 11.10Digital cellular telecommunications system (Phase 2)； Mobile Station (MS) conformance specification； Part 1: Conformance specification101112133GPP TS 51.010-13GPP TS 34.1243GPP TS 34.1213GPP TS 34.123-1Dig

22、ital cellular telecommunications system (Release 5); Mobile Station(MS) conformance specificationElectromagnetic Compatibility (EMC) for mobile terminals and llary equipment.Electromagnetic Compatibility (EMC) for mobile terminals and llary equipment.Technical Specification Group Radio Access Networ

23、k; Terminal conformance specification; Radio transmission and reception (FDD)SIM5210 Hardware Design1.2 Terms and abbreviationsTable 2: Terms and abbreviationsSIM5210_HD_V1.95713.02.2009AbbreviationDescriptionADCAnalog-to-Digital ConverterARPAntenna Reference PointBERBit Error RateBTSBase Transceive

24、r StationCSCoding SchemeCSDCircuit Switched DataCTSClear to SendDACDigital-to-Analog ConverterDRXDiscontinuous ReceptionDSPDigital Signal ProcessorDTE DTRDTXData Terminal Equipment (typically computer, terminal, printer) Data TerminalyDiscontinuous TransmissionEFREnhanced Full RateEGSMEnhanced GSMEM

25、CElectromagnetic CompatibilityESDElectrostatic DischargeETSEuropean Telecommunication StandardFCCFederal Communications Commission (U.S.)FDMAFrequency Division Multiple AccessFRFull Rate141516173GPP TS 34.123-3EN 301 908-02 V2.2.1EN 301 489-24 V1.2.1IEC/EN60950-1(2001)User Equipment (UE) conformance

26、 specification; Part 3: Abstract Test Suites.Electromagnetic compatibility and Radio spectrum Matters (ERM Stations (BS) and User Equipment (UE) for IMT-2000 Third Gen cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Sp(UTRA FDD) (UE) covering essential requirements of arti of the R&T

27、TE DirectiveElectromagnetic compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Sp(UTRA) for Mobile and portable (UE) radio andllary equipmentSafety of information technol

28、ogy equipment (2000)183GPP TS 51.010-1Digital cellular telecommunications system (Release 5); Mobile Station (MS) conformance specification19GCF-CC V3.23.1Global Certification Forum - Certification Criteria202002/95/ECDirective of the European Parliament and of the Council of 27 January 2003 on the

29、restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS)SIM5210 Hardware DesignSIM5210_HD_V1.95813.02.2009GMSKGaussian Minimum Shift KeyingGPRSGeneral Packet Radio ServiceGSMGlobal Standard for Mobile CommunicationsHRHalf RateIMEIInternational Mobile Equipm

30、ent IdentityInorm Imax kbpsNormal Currentum Load Current Kilo bits per secondLi-IonLithium-IonMOMobile OriginatedMSMobile Station (GSM engine), also referred to as TEMTMobile TerminatedPAPPassword Authentication ProtocolPBCCHPacket Switched Broadcast Control ChannelPCB PCS RFPrinted Circuit Boardal

31、Communication System, also referred to as GSM 1900 Radio FrequencyRMSRoot Mean Square (value)RTCReal Time ClockRxReceive DirectionSIMSubscriber Identification ModuleSMSShort Message ServiceTDMATime Division Multiple AccessTETerminal Equipment, also referred to as DTETXTransmit DirectionUARTUniversal

32、 Asynchronous Receiver & TransmitterVSWRVmax VnormVoltage Standing Wave Ratio um Voltage ValueNormal Voltage ValueVmin VIHmax VIHmin VILmax VILmin VImax VImin VOHmax VOHmin VOLmax VOLminMinimum Voltage Valueum Input High Level Voltage Value Minimum Input High Level Voltage Value um Input Low Lev

33、el Voltage ValueMinimum Input Low Level Voltage Value Absoluteum Input Voltage Value Absolute Minimum Input Voltage Valueum Output High Level Voltage ValueMinimum Output High Level Voltage Value um Output Low Level Voltage Value Minimum Output Low Level Voltage ValueFDSIM fix dialing phonebookSIM521

34、0 Hardware DesignSIM5210_HD_V1.95913.02.2009SMSIM phonebookNCNot connectEDGEEnhanced data rates for GSM evolutionHSDPAHigh Speed Downlink Packet AccessZIFZero intermediate frequencyWCDMAWideband Code Division Multiple AccessVCTCXOVoltage control temperature-compensated crystal oscillatorUSIMUniversa

35、l subscriber identity moduleUMTSUniversal mobile telecommunications systemUARTUniversal asynchronous receiver transmitterSIM5210 Hardware Design2 Product conceptDesigned for global market, SIM5210 is a quad-band GSM/GPRS/EDGE and UMgine thatwork on frequencies of GSM 850MHz, EGSM 900 MHz, DCS 1800 M

36、Hz, PCS1900 MHz, and UMTS2100MHz. SIM5210 provides GPRS multi-slot class 12/class10/class 8 (optional) capability and EDGE, supports the GPRS coding schemes CS-1, CS-2, CS-3 and CS-4. EDGE: 8 PSK, DTM (class A) multi-slot class 12, DL coding schemes: CS14, CS1-9, UL coding schemes:CS14, MCS1-9.SIM52

37、10 also support UMTS HSDPA up to 7.2MbpsWith a tiny configuration of 35mm x 35mm x 4.5 mm, SIM5210 can fit almost all the spacerequirements in your applications, such as Smart phone, PDA phone and other mobile devices.The physical interface to the mobile application isthrough a 70 pins board-to-boar

38、dconnector, which provides all hardware interfaces between the module and customers boardsexcept the RF antenna interface.zzzzzSerial port and USB 2.0(full speed) port can be alternatively used as data port. USIM interface: support SIM cards: 3V & 1.8VPower on/ff and reset signal Backup RTC inte

39、rface.Six GPIOs: 1 for interrupt, 1 for flight mode, 1 for status LED, 2 for output control, 1 for input.Three audio channels include two microphones inputs and three audio outputs. This canzbe easily configured by ATA camera interface is provided.* An I2C interface is provided.d.zzzA 4 bit SD card

40、interface is provided.*Note：Camera interface and SD card interface functions will be supported by customization software.The SIM5210 provides RF antenna interface with two alternatives: antenna connector and antenna pad. The antenna connector is MURATA MM9329-2700. And customers antenna can be solde

41、redto the antenna pad.The SIM5210 is integrated with the TCP/IP protocol，Extended TCP/IP AT developed for customers to use the TCP/IP protocol easily, which is very useful fortransfer applications.ds arethose dataNote: The SIM5210 have two kinds of interface (UART and USB) to connect to host CPU. US

42、B interface is mapped to 3 virtual UART: “SIMTECH USB Modem”, “SIMTECH NMEA Device”and “SIMTECH Diagnostics interface”. UART, “SIMTECH USB Modem” and “SIMTECHNMEA Device” could response ATSIM5210_HD_V1.95d, normally we recommend UART or “SIMTECH1013.02.2009SIM5210 Hardware DesignUSB Modem” to contro

43、l SIM5210 module.SIM5210 key features at a glance:Table 3: SIM5210 key featuresSIM5210_HD_V1.951113.02.2009FeatureImplementationPower supplySingle supply voltage 3.4V 4.2VPower saving Frequency bandsTransmit powerTypical power consumption in SLEEP mode to 4.0mA ( DRX=2 )l GSM: 850M/ 900M/ DCS 1800M/

44、 PCS 1900M.l UMTS: 2100Ml The SIM5210 can worked in GSM and WCDMA model The frequency bands also can be set by ATD. Class 4 (+33dBm ±2dB) for EGSM850 Class 4 (+33dBm ±2dB) for EGSM900 Class 1 (+30dBm ±2dB) for GSM1800 Class 1 (+30dBm ±2dB) for GSM1900 Class E2 (+27dBm ± 3dB)

45、 for GSM 850 8-PSK Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK Class 3 (+24dBm +1.7/-3.7dB) for UMTS 2100, WCDMA FDD BDIGPRS/EDGEconnectivityl GPRS/EDGE multi-slot is up to class 12l GPRS mobile station cl

46、ass BTemperature rangel Normal operation: -15°C to +55 °Cl Extended operation: -20°C to -15°C and +55 °C to +70 °C GSM,GPRS/EDGE Class 12(2 up): under RF MAXPOWER，operati>12 hoursWCDMA FDD BDIunder <10dBm ,operation duration >12 hWCDMA FDD BDIunder RFMAXPOWER ,

47、operation duration <30minsl Storage temperature -40°C to +85°CDATA GPRS:CSD:l GPRS data downlink transfer: max. 85.6 kbpsl GPRS data uplink transfer: max. 42.8 kbpsl Coding scheme: CS-1, CS-2, CS-3 and CS-4l SIM5210 supports the protocols PAP (Password Authentication Protocol) usually u

48、sed for PPP connections.l The SIM5210 integrates the TCP/IP protocol.l Support Packet Switched Broadcast Control Channel (PBCCH)l CSD transmission rates: 2.4, 4.8, 9.6, 14.4 kbps, non-transparentl Unstructured Supplementary Services Data (USSD) supportSIM5210 Hardware DesignSIM5210_HD_V1.951213.02.2

49、009DATA EDGEDATA UMTS/HSDPASMSl EDGE E2 power class for 8 PSKl DTM (simple class A), multi-slot class 12l Downlink coding schemes CS 1-4, MCS 1-9l Uplink coding schemes CS 1-4, MCS 1-9l BEP reporting and test mode Bl 8-bit, 11-bit RACHl PBCCH supportl phase/2 phase access proceduresl Supports HS-DSC

50、H (HS-SCCH, HS-PDSCH and HS-DPCCH)l Supports aum of four simultaneous HS-SCCH channelsl Supports aum of 10 HS-PDSCH channelsl Supports both QPSK and 16 QAM modulation.l Supports CQI, and ACK/NACK on HS-DPCCH channell Supports all incremental redundancy versions for HARQl Can switch between HS-PDSCH

51、and DPCH channel resources as directed by the network.l Can be configured to support any of the two power classes 3 or 4l Supports network activation of compressed mode by SF/2 or HLS on the DPCH for conducting inter-frequency or inter-RAT measurements when the HS-DSCH iive.l STTD on both associated

52、 DPCH and HS-DSCH is supported simultaneously.l Cmode 1 is supported on the DPCH when the HS-PDSCH iive.l STTD on HS-SCCH is supported when either STTD or C Mode 1 are configured on the associated DPCH.l Supports TFC selection limitation on the UL factoring in the transmissions on the HS-DPCCH as re

53、quired in TS 25.133.l MT, MO, CB, Text and PDU model SMS storage: SIM cardl Support transmission of SMS alternatively over CSD or GPRS. User can choose preferred mode.SIM interfaceSupport SIM card: 1.8V ,3VExternal antennaConnected via 50 Ohm antenna connector or antenna padAudio featuresSerial inte

54、rfacePhonebook managementSpeech codec modes:l Half Rate (ETS 06.20)l Full Rate (ETS 06.10)l Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)l AMRl A5/1, A5/2, and A5/3 cipheringl Serial Port Seven lines on Serial Port Interfacel Serial Port can be used to control module by sending AT d.Support phonebook types: SM, FD, LD, RC, ON, MC.SIM5210 Hardware DesignTable 4：Coding schemes andum net data rates over air interfaceSIM5210_HD_V1.951313.02.2009Coding scheme1 Timeslot2 Timeslot4 TimeslotCS-1:9.05kbps18.1kbps36.2kbpsCS-2:13.4kbps26.8kbps53.6kbpsCS-3:15.6kbps31.2kbps6