機械工程英語(上) 主編 劉鎮昌 1-15課后答案(共12頁)

1、第一課1）機械工業用于制造(zhzo)產品的材料，可以分為金屬材料、聚合物、陶瓷和復合材料。 The materials used for manufacturing products can be divided into four categories: metallics, polymerics, ceramics and composites. 2）金屬可以(ky)分為有色金屬和黑色金屬。 Metallics can be classified into non-ferrous and ferrous metallics. 3）塑料(slio)可以分為熱固性塑料和熱塑性塑料。 Plas

2、tics cab be grouped into thermosets (thermosetting plastics) and thermoplastics. 4）復合材料可以由兩種或兩種以上性質不同的材料組合，保留各自的特點，得到單一材料無法比擬的、優越的綜合性能。 A composite consists of two more kinds of different materials, with each material keeping its own property, to get the superior synthetical (combined) performance w

3、hich is unparalleled (unmatched) by that of the individual material. 5）當其所處的工作環境變化時，智能材料能改變其性能、顏色和形狀等。An intelligent material can change its property, color, shape and so on when its working environment changes.第二課1) 材料的特性可分為物理特性和化學特性兩大類。 The properties of a material can be divided into two main gro

4、ups: physical and chemical property. 2) 塑性材料在拉伸載荷的作用下應力達到屈服(qf)強度時，產生塑性變形。When the stress of a material under the action of tensile load reaches yield strength, it will produce plastic deformation. 3) 除軟鋼等材料有明顯(mngxin)的屈服點外，合金鋼和有色合金等塑性材料無明顯的屈服點。 Except that materials such as mild steel have obvious

5、yielding point, plastic materials such as alloy steel and non-ferrous alloys have no obvious yielding point. 4) 脆性材料拉伸時，以抗拉強度為極限應力，壓縮(y su)時以抗壓強度為極限應力。 When a brittle material is stretched, the tensile strength is used as its ultimate stress, and when the material is compressed, compressive strength

6、 is used as its ultimate stress. 5) 蠕變是指材料在恒定溫度和恒定應力的長期作用下，隨著時間的延長會緩慢的發生塑性變形的現象。 Creep is referred to the phenomena that under the long-time action of constant temperature and load, the material will slowly produce plastic deformation with the extension of time.第三課 1）為特定產品選擇一種理想的材料是一個非常復雜的過程。 It is

7、a complicated process to select an ideal material for a specific product. 2）要達到正確選材，合理用材，加強新材料(cilio)應用技術的研究，對于發展和擴大其應用都是十分有用的。 To make a correct selection and use of materials, strengthening the study of technology on new materials and their applications is very useful to develop and expand their a

8、pplication fields. 3）選擇(xunz)材料時要注意材料的物理化學性能、工藝性能、經濟性和可獲得性。 When selecting a material, what should be noted include the physical and chemical properties, processability , cost and its availability . 4）在材料(cilio)的各種性能指標中，如只取強度極限或疲勞極限一個指標作為選擇材料的依據，常常不夠合理。 It is often unappropriated to select a materia

9、l only in accordance with ultimate strength or fatigue strength chosen from various performance criteria of material. 5）對于大批量生產，材料的選用與供應的可能性有關。 For large scale production, selection for a type of material is associated with the possibility of its supply.第四課1）對材料循環每一階段的研究有助于認識材料的重要性及其對人類社會的影響。 Studyi

10、ng each of the stages of material cycle aids us with insight into the importance of materials and their effects on our society. An explanation of each of the stages will provide us with insight into the importance of materials, how they affect our lives, and their total impact on society. (課文(kwn)中相

11、似句)2）從鋁礦石中提煉(tlin)鋁消耗大量電力。 It takes large amounts of electricity to extract Al from bauxite ore. 3）設計人員(rnyun)確定產品對材料性能要求，材料工程師可制備滿足其需要的材料。 Designers specify desired properties of the materials required by products and material engineers create the materials to suit the needs. 4）制造工程是將材料轉變成最終產品和系統的一

12、門技術學科。 Manufacturing engineering is the study of techniques to turn bulk materials into final products and systems. 5）為了保護環境和自然之源，必須進一步重視材料的回收和再利用。 More attention must be paid to material recycling for protecting environment and natural resources.第五課1） 將金屬從礦石中分離出來的過程叫冶煉。 The process in which metal i

13、s separated from ore is called smelting. 2）幾乎所有的黑色金屬中都含有碳。 Almost all the ferrous metallics contain carbon. 3） 影響鑄件質量的因素很多。 The factors that affect the quality of a casting are numerous. 4） 通常認為金屬鑄造(zhzo)是藝術與科學的結合。 It is usually believed that metal casting is a combination of art and science. 5）熔模鑄造

14、具有很多獨特(dt)的優點。 Investment casting has many peculiar advantages.第六課1）今天，在鍛造(dunzo)工藝中，金屬的成形并非總是采用加熱和鍛打的方法。Today，in forging process, metal forming does not always use the method of heating and hammering. 2）液壓機鍛錘被廣泛地用于鍛造工藝中。 Hydraulic presses and the hammer are widely used in forging process. 3）隨著鍛造技術的

15、進步，許多以前認為不可能鍛的材料現在也可通過常規鍛造工藝進行加工。 With the development of forging technology, many materials which was believed that it was impossible to be forged can now be forged with the regular forging process. 4）鍛造就是要使金屬材料變形為所需要的形狀，而不同的材料對外界所施加的變形力的反應極不相同。 The purpose of forging is to make the shape of metal

16、to be changed into what is needed, and the responses of different materials to the deforming force exerted by outsides are extremely different. 5）鍛造設備的行為是鍛造技術發展(fzhn)的一個重要課題，因?yàn)樗苯佑绊懼懺旃に嚨男Ч?xiogu)。 The behavior of forging equipments is an important topic in the development of forging technology, bec

17、ause it directly influences the effects of forging process.第七課1）焊弧溫度(wnd)的測量值通常在5000-30000K之間。 The measured value of welding arc temperature is usually between 5000 and 30000K. 2) 焊接已成為加工和維修金屬產品的主要手段之一。 Welding has become one of the main methods to fabricate and repair metal- products. 3) 當工件被加熱到所需溫

18、度時，就將它們移至砧座上鍛打到一起。 When the work-pieces are heated to the required temperature, they will be moved onto an anvil and united by forging. 4) 除此之外，還可以用激光進行焊接。In addition to that，laser can also be used in welding. 5) 鍛焊是最早的焊接方法，并且，這種方法作為唯一的焊接方法持續了幾個世紀。 Forging welding is the first form of welding and la

19、sted for several centuries as the only welding method.第八課1）加熱(ji r)時,工件的斷面越厚保溫(bown)時間應該越長,以使其內部(nib)溫度趨于均勻。 When heated, the thicker the section of a work-piece, the longer the temperature should be kept，so that the temperature tends to be even throughout the work-piece。2）金屬的溫度還可以通過觀察其顏色來判斷。 Metal

20、temperature could also be judged by watching its color. 3）退火的主要目的是使鋼件的硬度變軟，以便于進行機械加工，即冷加工。 Annealing is designed to reduce the hardness of a steel part, so that it can be machined or cold-processed easily. 4）對鋼件進行加熱和冷卻可以增加其硬度和抗拉強度。 Heating and cooling a steel part can increase its hardness and tensi

21、le strength. 5）在許多熱處理工藝中，加熱速度都是應該注意的重要因素。 In many heat-treatment processes, the rate of heating is an important factor to which we should pay attention.第九課1）螺桿用來傳遞運動和力。 Screw threads are used to transmit motion and force. 2）鉚接既可以是搭接也可以是對接。 Rivet joints can be either a lap or a butt joint. 3.）焊接殘余應力是

22、由于熱膨脹和收縮(shu su)不均勻產生的。 Welding residual stress is produced by the uneven thermal expansion or contraction 4）在焊接設計時，要考慮(kol)安全因素。 Safety factors should be taken into consideration in welding design. 5）膠接連接的強度取決于樹脂對金屬表面的粘附力和樹脂本身(bnshn)分子之間的結合力。 The strength of adhesive joint is determined by the adhe

23、sion of the resin to the metal surfaces, and the cohesion between the molecules of the resin itself.第十課1）帶傳動和鏈傳動聯接兩個或多個軸來傳遞旋轉運動和運動。 Belt drive and chain drive are used to connect two or more shafts for transmission of rotation and power. 2）鏈傳動的傳動比計算跟齒輪的傳動一樣，即與齒數成反比。 The speed ratio of a chain drive

24、is the same as that of a gear drive, namely, the inverse ratio of the tooth number. 3）鏈長必須是節距即一個連節的長度的倍數，節距的數目最好是偶數。 The chain length must be a multiple of the length of one shackle and it is preferable that the number of pitches is even. 4）行星輪系在較小的空間內能得到較大的傳動比。 Planetary gear trains can get larger

25、speed ratio in a small package. 5）凸輪機構(jgu)能把旋轉運動轉換成直線運動或擺動。 Cam mechanism can convert rotary motion into linear or oscillating (angular) motion. 第十一課1） 軸承(zhuchng)的潤滑有油潤滑、水潤滑、脂潤滑、或氣潤滑（如空氣）。 The lubricants used in bearings include oil, water, grease or gas (such as air). 2）軸承材料要有好的耐壓強度和疲勞強度、高的熱傳導率、好

26、的延展性、對軸和箱體材料有化學惰性等性能(xngnng)要求。 The bearing materials should have good compressive and fatigue strength, high heat conductivity, good ductility, and have some requirements on the chemical inertness of shaft and housing materials. 3）軸承或多或少有氣孔，這取決于制造時受到的壓力。 Depending upon the pressure subjected in man

27、ufacturing, a bearing is more or less porous. 4）電磁軸承最初是為地球衛星上的應用而開發的，后來開始在工業裝備中應用。 Electromagnetic bearings were originally developed for earth-orbit satellites and then begin to be used in industrial equipment.5）滾動接觸軸承沒有粘滑效應，其動力矩小，運行摩擦力小。Bearings with rolling contact have no slip-stick effect，low s

28、tarting torque and running friction.第十二課1）為了生產出滿意的齒輪驅動系統，必須要有齒輪設計的知識，包括設計的限制(xinzh)條件。 To produce a satisfactory gear drive system, one must have a working knowledge of gear design, including design limitations. 2）如果要正確運轉的話，兩個嚙合齒輪(chln)的齒距必須相等。 The circular pitches of meshing gears must be equal if

29、they are to operate properly. 3）非金屬(jnsh)齒輪比金屬齒輪強度低，熱傳導率低。 Non-metallic gears are weaker than metallic gears and have low heat conductivity. 4）精密齒輪需要磨削，修整或其它精密成形加工。Precision gears need being ground，shaved or otherwise accurately shaped. 5）錐齒輪可以有任意傳動比，但通常不超過6。 The speed ratio of a pair of bevel gears

30、 could be arbitrarily chosen, but it is usually not over 6.第十三課1）液壓系統有動力源、執行原件、控制元件和輔助系統組成。 A hydraulic system consists of power source, actuators, control devices and auxiliary system. 2）根據動力源的不同，液壓系統(xtng)可分為恒流系統和恒壓系統。 Depending on the power resource, a hydraulic system can be divided into a const

31、ant flow system and a constant pressure system. 3)齒輪泵是容積泵種結構最簡單(jindn)但效率較高的一種泵。 A gear pump is the simplest type of positive displacement pump and its efficiency is higher than others. 4)液壓系統中另一種重要(zhngyo)元件是閥，主要有三種類型的閥：溢流閥、流量控制閥和方向控制閥。 Another important device in hydraulic system is valve. There a

32、re mainly three types of valve: relief valve, flow control valve and direction control valve.第十四課1) 在車床加工中，工件的旋轉為主運動，刀具的運動為進給運動。 In turning machining, the turning of the work-piece is primary motion and the motion of the tool is feed motion. 2)常用的銑床有以下幾種：1）立式銑床；2）臥式銑床；3）龍門銑床。 The commonly used milling machines are as the following kinds: 1) Horizontal milling machine; 2) Vertical milling machines; 3) Plano-millers.3）磨床加工形成的切屑非常小，以至難于與粉塵相區別。 Chips formed by a gr