2004標致307電路圖培訓手冊標志removal-refitting heat exchanger flow control solenoid

1、B2CG80K3 - 31/12/2003 - 307- AL4 AUTOMATIC GEARBOXREMOVAL - REFITTING HEAT EXCHANGER FLOW CONTROL SOLENOID 熱交換器流量控制電磁閥1 - REMOVAL :拆除：NOTE : Do not drahe gearbox.注意：無需放掉自動變速箱油Disconnect the battery .斷開蓄電池SPEL FEATURE : AL4 AUTOMATIC GEARBOXRemove :拆除：the ECU cover ECU 罩蓋the connector of the engine e

2、cu ECU 插接器the battery 蓄電池the battery container 蓄電池支架the air cleaner housing 空氣濾清器殼體the air hose 空氣濾清器進氣管Remove the 2 bolts (1) (mounting of the modular connector on the gearbox) .擰掉 2 個螺栓 1Disconnect the modular connector (2) .拔掉接線模塊 2 的插接器SPEL FEATURE : AL4 AUTOMATIC GEARBOXExtract the blue 3-way c

3、onnector (3) from the modular connector (2) .拔掉接線模塊 2 上的藍色 3 通道插接器 3Remove :拆除：the front lefnd wheel 左前車輪the front left mud shield 左前擋泥板the solenoid valve harnessthe 2 bolts (5) 2 個螺栓 5t controls the exchanger (4) output 熱交換器流量控制電磁閥線束heat exchanger flow control solenoid (4) 熱交換器流量控制電磁閥 42 - REFITTIN

4、G :安裝：Replace the two o rings on the solenoid valve流量控制電磁閥 4 上的兩個“O”型密封圈t controls the exchanger (4) output .更換熱交換器Fit :安裝：heat exchanger flow control solenoid (4) 熱交換器流量控制電磁閥 4the 2 bolts (5) : tightening torque 1.0 da.Nm 2 個螺栓 5，擰緊力矩：10Nmthe solenoid valve harnesst controls the exchanger (4) outpu

5、t 熱交換器流量控制電磁閥線束the blue 3-way connector (3)he modular connector (2) 接線模塊 2 上的藍色 3 通道插接器 3the 2 bolts (1) : tightening torque 1.0 da.Nm 2 個螺栓 1，擰緊力矩：10NmReconnect the modular connector (2) .連接接線模塊 2SPEL FEATURE : AL4 AUTOMATIC GEARBOXFit :安裝：the front left mud shield 左前擋泥板the front lefnd wheel 左前車輪the battery container 蓄電池支架the battery 蓄電池the air cleaner housing 空氣濾清器殼體the air hose 空氣濾清器進氣管th