w3手表項(xiàng)目規(guī)格書原相8001新cover pah8001ei mechanical design guide for wrist v1t

1、PAH8001EI-QGCover Design Guide for Wrist2015 MarVersion HistoryVersion No.NoteDate0.1First Version2013/12/100.2Adding Options2014/02/100.3Changing Slide Format; Adding Rubber Cover Materials & Process2014/03/180.4Revise Mechanical Structure2014/05/080.5Adding Step Design suggestions and update Doubl

2、e Injection drawings2014/05/200.6Modify Double Injection Surface Cover Drawing2014/05/290.7Revise Options2014/06/300.8Modify wording and add Standard Part2014/09/160.9Modify step design concept and surface cover cross-section2014/09/261.0Add Standard Part Surface Cover2014/12/021.1Modify Contents201

3、5/03/03IntroductionThis document is to let customer understand Mechanical Design for Consumer Products, such as Wearable Device.Basic Requirement: Using Surface Cover with Double InjectionAlso, PXI strongly suggests customer should use “step design” in order to improve contact between skin and senso

4、r. PXI suggests that the protrusion part should be 0.5mm (or higher).Based on the study, average SNR for step design is far better than flat design.Step Design ConceptProtrusion from Surface (0.5mm or Higher)Note: tolerance +/-0.1mmA. Protrusion thickness Min: 0.5mm Max: 2.5mmB. Protrusion Area Min:

5、 4 x 6mm Max:6 x 8mmC. Parallel direction of LED/Sensor line and wrist performance is better than vertical directionParallel direction of sensor and wristSurface Cover Cross-SectionItemsDescriptionSurface CoverMaterials: PC or PMMA (Double Injection)Thickness: 0.8mm (5 bar water resist)Black area wi

6、dth: 0.7mm0.1mm, absorbency 99.99% 400700 nm Ex. PC bayer 2805Transparent Area Optical Requirement: PC/PMMA with 90% Transparency Ex. PMMA MF001UV painting : 3HUV Assembly ToleranceThickness: under 0.1mm (Best Case: 0mm)Surface CoverPAH8001 SubstrateAssembly ToleranceBlack areaPAH8001 SensorLEDTransparent AreaTransparent AreaSurface Cover Reference Customized Cover Pattern1 (Preferred)PAH8001 Surface Cover Drawing ReferenceCustomer could design the cover based on ID / waterproof requirement. Black area isolate LED and sensorSurface Cover Refere