泵體設計說明書樣本

1、本科生畢業設計學 院、系：專 業 學生姓名：I 二一1最終評定成績 TOC o 1-5 h z 院（系）:_專業：學號：學生姓名：摘 要泵體類零件是一種泵體。泵體類零件是機器及其部件的基礎件，它將機器及其部 件中的軸、軸承、套和齒輪等零件按一定的相互位置關系裝配成一個整體，并按預 定傳動關系協調其運動。因此，泵體的加工質量不但影響其裝配精度及運動精度，而 且影響到機器的工作精度、使用性能和壽命。其主要特點：形狀復雜、壁薄且不均 勻，呈腔形，加工部位多，加工難度大，既有精度要求較高的孔系和平面，也有許多 精度要求較低的緊固孔。因此，一般中型機床制造廠用于泵體類零件的機械加工勞動 量約占整個產品加

2、工量的15%內部20%。對工件進行機械加工時，為了保證加工要求，首先要使工件相對于機床有正確的 位置，并使這個位置在加工過程中不因外力的影響而變動。為此，在進行機械加工前, 先要將工件裝夾好。用夾具裝夾工件時，工件相對于道具及機床的位置精度由夾具保 證，不受工人技術水平的影響，使一批工件的加工極度趨于一致，穩定的保證工件的 加工精度。同時使用夾具裝夾工件方便、快捷，工件不需要?jiǎng)澗€找正，可顯著的減少 輔助工時，提高勞動生產率；工件在夾具中裝夾后提高了工件的剛性，因此可加大切 屑用量，提高勞動生產率；可使用多件、多工位裝夾工件的夾具，并可采用高效夾緊 機構，進一步提高勞動生產率。在批量生產中使用夾

3、具后，由于勞動生產率的提高、 使用技術等級較低的工人以及廢品率下降等原因，明顯得降低了生產成本。夾具制造 成本分?jǐn)傇谝慌ぜ?。每個工件增加的成本時極少的，遠遠小于由于提高勞動生產 率而降低的成本。工件批量愈大，使用夾具所取得的經濟效益就愈顯著。關鍵詞：泵體類零件，夾具,ABSTRACTA part of the container kind is the basic matter of a machine and a part. That will choose an axis in the machine and the part, a bearing and a part of a co

4、ver and a gear as related assembly in the fixed mutual location, and is 1 of whole. Its transmitted by a schedule, and its related to the movement of harmonization. Therefore the quality of the processing of a container doesnt just influence its precision of the assembly and precision of the movemen

5、t and moreover influences the precision of the mechanical work, and the performance and the lifetime are used. Its main feature: The shape is complicated, a wall, its thin and, I dont balance and present the interior with the shape of the accent, and there are a lot of parts of processing, and thoug

6、h the difficulty levelof the processing finds a plane with a department in the hole where its big and highly precise in the percentage, and is low in the percentage likewise, there is precision of much I ask to tighten a hole up. Therefore a manufacturing factory in a medium turnery is usually used

7、for Labor of mechanical processing of a part of the container kind, and it accounts for 15%20% of the processing amount of the whole product approximately.Parts of mechanical processing, in order to ensure processing requirements, the first part of the machine to make a correct position, and this po

8、sition in the course of processing is not due to the impact of external changes. To this end, during machining, must be the workpiece clamping good.Clamping fixture with the workpiece, the workpiece relative to the location of props and precision machine tools from the fixture that the technical lev

9、el of workers from the impact of a number of parts of the extreme processing line, a stable guarantee the accuracy of processing the workpiece. At the same time the use of the workpiece clamping fixture convenient, fast, crossed the workpiece does not need to find is, can significantly reduce the su

10、pplementary working hours, improving labor productivity; Workpiece fixture in the fixture after the increase in the rigidity of the workpiece, it can increase the amount of chip, raising labor productivity; can use pieces, multi-fixture parts of the fixture, and efficient use of clamping institution

11、s, to further improve labor productivity .In the use of mass production after the fixture, due to the improvement of labor productivity, the use of technology workers in lower grades and reject rate dropped and other reasons, obviously in the lower production costs. Fixture manufacturing costs asses

12、sed in a number of parts on. Each part of the increase in the cost of a small, far less than due to increased labor productivity and reduce costs. Workpiece larger quantities, the use of fixture on the economic benefits achieved by the markedly effective.Keywords: The feature of the part of the cont

13、ainer kind, Fixture Features資料內容僅供您學習參考，如有不當或者侵權，請聯系改正或者刪除。目錄摘 要 錯誤!未定義書簽。ABSTRACT 錯誤!未定義書簽。目 錄 錯誤!未定義書簽。第1章 緒論 錯誤!未定義書簽。1.1泵體淺析錯誤!未定義書簽。1.2泵體零件簡介錯誤!未定義書簽。1.2.1泵體類零件的功用及結構特點錯誤!未定義書簽。1.2.2泵體零件加工工藝特點錯誤!未定義書簽。第2章零件的分析 錯誤!未定義書簽。2.1零件的作用錯誤!未定義書簽。2.2零件的工藝分析錯誤!未定義書簽。第3章 零件的工藝規程設計 錯誤!未定義書簽。3. 1選擇零件的材料錯誤!未定義

14、書簽。3. 2確定毛坯的制造形式錯誤!未定義書簽。3. 3基準的選擇錯誤!未定義書簽。3. 4制定工藝路線錯誤!未定義書簽。3. 5加工工藝過程的分析錯誤!未定義書簽。第4章夾具設計 錯誤!未定義書簽。4.1定位方案的選定錯誤!未定乂書簽。4.2夾具夾緊裝置的確定錯誤!未定義書簽。4.2.1夾緊力的方向和作用點的確定錯誤!未定義書簽。資料內容僅供您學習參考，如有不當或者侵權，請聯系改正或者刪除。4.2.2夾緊力大小的估算錯誤!未定義書簽。4.2.3夾緊機構及元件的選擇錯誤!未定義書簽。4.3夾具傳動裝置的確定錯誤!未定義書簽。4.4夾具體的設計錯誤!未定義書簽。4.4.1夾具體毛坯類型的選擇錯

15、誤!未定義書簽。4.4.2夾具體上排屑措施的確定錯誤!未定義書簽。第5章夾具定位方案的分析錯誤！未定義書簽。5.1工件定位自由度分析錯誤!未定義書簽。5.2工件定位精度分析錯誤!未定義書簽。結 論 錯誤!未定義書簽。參考文獻 錯誤!未定義書簽。第1章緒論1.1泵體淺析中國摩托車工業經過二十多年的飛躍發展，取得了長足的進步，已成為國民經濟 中的重要一環，特別在1993年就以367.49萬輛的產量首次超過摩托車王國一一日本, 成為世界頭號摩托車生產大國，1997年則突破1000萬輛大關，達1003.7萬輛。截止， 中國摩托車產量連續 位居世界第一。然而，中國雖是世界摩托車生產第一大國，但不 是世界摩托車的強國。中國摩托車的產品質量與歐、美、日等摩托車強國相比，特 別是可靠性方面，仍有相當大的差距。摩托車行業面臨著開發能力低、產品同質化嚴 重、中小排量技術欠缺、知識產權意識尚待提高等諸多問題。當前中國摩托車主要集中在 50mL、70mL、80mL、90mL、100mL、110mL、125mL、 150mL等幾款中小排量車型上，而250mL、350mL、400mL、750mL以上中高排量車 型很少，有的甚至是空缺。這說明中國摩托車生產技術水平只限于中、小排量低速車 上，而且過于集中。例