阿朗omc操作及維護_圖文

1、Omc操作及維護目錄1. 維護界面介紹2. 每日維護介紹3. 維護經驗介紹4. 基站常用參數的維護5. 取SMARTER1.3數據附錄一、維護界面介紹對基站的日常操作，管理和維護主要通過以下幾個人機界面實現：1. ECP Control & Display 這個圖形界面主要用于顯示基站的狀態。通過鍵入一些由數字組成的命令，可以顯示基站各個主要部分的狀態和告警。2. TICLI ACCESS 是一個基于UNIX的命令行界面。通過輸入一些有特定語法規則的命令，可以顯示基站、RCS、AP等各個部分的狀態和告警，并對其進行各種操作（包括remove，restore，diagnose，initializ

2、e等）并且得到詳細的輸出報告。RCS是運行于AP上，用于控制基站運行的程序。3. ECP Recent ChangeVerify 這是和儲存基站、ECP參數配置的數據庫的接口，用于查找和更改基站、ECP的參數配置。4. OMP Shell 這是OMP的UNIX Shell，每天記錄的ROP文件就存放在其目錄/omp-data/logs/OMPROP1中。同時在/home/omptech/spa/data目錄下有昨天以前告警總結，其中*ecp文件為ECP、基站告警總結。二、每日維護介紹1. 查看基站告警。在ECP Control & Display界面輸入以下命令：（其中c為RCS，n為CDM，

3、x為CCU，d為DCS，t為T(mén)RKGRP）2121 顯示所有基站的狀態,如下圖所示：2131，c 顯示基站c的狀態，Signaling Link以及APRCS等2136，c 顯示基站c的TFU，GPS，AMP狀態2138，c，n 顯示基站c，模塊n的狀態，包括CRC，CBR，Packet Pipe等2139，c，n，x 顯示基站c，模塊n，第x 塊CCU（CMU）的狀態2152，d，t 顯示基站t的Packet Pipe Trunk Group狀態，現在RCS號和Trunk Group號設為相同。各界面狀態解釋?zhuān)?121界面2131界面2136界面2138界面2139界面2152界面2在TIC

4、LI ACCESS界面輸入以下命令：OP:CELL a 輸出基站的狀態OP:ALARM 輸出詳細的告警3. 當基站的某塊電路板發生告警時?？梢栽赥ICLI ACCESS界面輸入以下命令對電路板進行恢復： 對MODCELL（MD1.0MD2.0MD3.0CP3.0CP4.0AIO）：對TFU進行操作(對應ECP Control & Display 2121界面，輸入2136rst:cell a, TFU b;ucl rmv:cell a, TFU b;ucldgn:cell a, TFU brst:cell a,tfu:gps b;ucl 更換TFU時使用此命令對功放進行操作rst:cell a

5、, asmb b,txamp c;uclrmv:cell a, asmb b,txamp c;ucldgn:cell a, asmb b,txamp c對cbr進行操作rst:cell a, cdm b,cbr c;uclrmv:cell a, cdm b,cbr c;ucldgn:cell a, cdm b,cbr c對CCU進行操作rst:cell a, cdm b,ccu c;uclrmv:cell a, cdm b,ccu c;ucldgn:cell a, cdm b,ccu c對crc進行操作rst:cell a, cdm b, crc;uclrmv:cell a, cdm b, c

6、rc;ucldgn:cell a, cdm b, crc更換CRC時的操作命令(CDBSMM基站與此相同op:cell a,generic 顯示基站的軟件版本信息send:cell a,generic “基站版本號“ 往CRC送基站版本init:cell a:sc 基站硬件重啟（初始化基站）restart:rcs a 基站軟件重啟（初始化基站）對CDBS(MM基站：對TFU進行操作rst:cell a, bbu b, tfu ;uclrmv:cell a, bbu b, tfu ;ucldgn:cell a, bbu b, tfurst:cell a,bbu b,tfu c:gps ;ucl

7、更換TFU時使用此命令對功放進行操作rst:cell a, bbu b, pcbr c,mma ;uclrmv:cell a, bbu b, pcbr c,mma ;ucldgn:cell a, bbu b, pcbr c,mma對pcbr進行操作rst:cell a, bbu b, pcbr c ;uclrmv:cell a, bbu b, pcbr c ;ucldgn:cell a, bbu b, pcbr c 對CCU進行操作rst:cell a, bbu b, ccu c ;uclrmv:cell a, bbu b, ccu c ;ucldgn:cell a, bbu b, ccu c

8、 對crc進行操作rst:cell a, bbu b, crc ;uclrmv:cell a, bbu b, crc ;ucldgn:cell a, bbu b, crc對基站PP管的操作：rst:dcs #,trkgrp #,member # 拉起PP管（trkgrp等于RCS號）注意：如果換新板件拉起時一定要用ucl.其中加;ucl的選項表示unconditional，不加表示conditional。它們的區別是：conditional restore會先對電路板進行diagnose，然后進行restore；而unconditional restore則直接進行restore。輸入命令后會

9、輸出報告。如果是ATP（All Tests Passed），則表示restore成功；如果是STF（Some Tests Failed），則表示有硬件故障，需要下站更換電路板。注意：rst正在服務的電路板會導致電路板短暫退出服務，rst/rmv電路板時，基站或扇區不允許接入新的呼叫或切入用戶，只保留正在通話的用戶，通話結束后才能把電路板重新拉起來或拉下來。但是若用戶通話時間太長，則命令失效。注意：對電路板做DGN操作時，電路板應處于OOS狀態。4從AP對基站的操作進入AP狀態下login :root Pwd:newsyscd /ap/platform/default/support/bin .

10、/CCMdump 顯示當前AP有那些RCS所使用的DS1和DS0./sm telnet 1 mc 登錄到基站控制單元 login :lucent Pw:passwordgparamsChange （查看或修改基站參數，具體參數見附錄）WDdcr 10 （顯示crc中最后10條記錄）ShowNodeAll看板件狀態：logout 退出./sm telnet 1 liu 登錄到基站接口單元login :lucent Pw:passwordshowPP （顯示誤碼積累,要登錄liu）logout 退出./sm ping mc 丟包率不大于8%即可ctrlc 退出5. 當Signaling Link發

11、生告警時。首先在維護文件中查到這個基站的DFI（一般表示為X-Y-DFI-face）位置，然后到5ESS-2000 Switch DCS STLWS界面，進入后先按“Ctrl+G”，再按“F3”到“CMD $HOME/cell50_020112.rop 把結果存為一個文件cgrep +-w# “FAN FAILURE” 020114.APX | pg 按頁顯示在屏幕上cgrep +-w# “ACOC 030923.APX在/home/omptech/spa/data目錄下有全天告警總結。三、維護經驗介紹1. 當TFU發生告警，并且restore失敗需要下站更換時，應考慮到此故障也有可能是OM（

12、Oscillator Module 晶振模塊）和Smart Switch發生故障。下站時應同時帶好這三種備板。2. 當在ECP Control & Display界面下2136頁發現RX AMP （LNA）告警時，無法進行restore，需更換相應的FILTER電路（要注意A1和A2）。下站時需帶好大型扳手，更換電路板時需擰下天饋線和緊固FILTER的大螺母。3. 風扇告警需到ROP文件中查找，發現告警需及時更換。Transmit Amplifier Fan是上部的大風扇，Digital Fan是下部的小風扇。4. 到基站更換機盤時需帶好基本的維修工具和萬用表以及朗訊專用的開門工具，更換機盤時

13、必須佩戴靜電手環。5. 基站GPS衛星無法鎖定.確認Smart Switch到CDBP的連線順序正確無誤。( Smart Switch J3/J4/J9 到 CDBP J751/J754/J750 , 保證TFU/PC Jumper設置正確, 用萬用表測量GPS天線通路中的直流5V電壓, 如在不能得到規定電壓值，可逐級檢查。如果5V正常，可以嘗試更換TFU。如果 TFU 正常，可嘗試更換Smart Switch或者OM. 必要時更換GPS天線或饋線系統6. 基站CCU不能工作 ( CCU OOS ?？赡茉蛴校篊CU Damaged；CCU20 不支持 Range Extension ( pr

14、ior to 44WW12B for Modular Cell 這時需要關閉這個功能特性，使cell2 form screen 11 field 208 row 7 為 “n”，執行restart:rcs xx 或者init:cell xx:sc使之生效；Ceqface 中導頻碼配置遺失或未生效，重新配置；CRC 需要更換。7. CDBS基站RFU故障。通過查找ROP，若是PCBRMMARFU PCUMM告警則需更換RFU,若是PCBR與CRC通信丟失，則需檢查RFUFOM與RFU連接光纖FOM板RFU電源等。四、基站常用參數的維護在ECP Recent ChangeVerify界面：對于基站

15、涉及到的form有：cell2cmodeqpcmmceqpcdmeqpbtseqpbbueqpceqfacepptgcmodpptmfciecpcgsa等其中對于MD1.0MD2.0MD3.0CP3.0基站涉及到的form有：cell2cmodeqp cdmeqp ceqfacepptgcmodpptmfciecpcgsaCP4.0AIO基站涉及到的form有：cell2cmodeqp btseqp ceqfacepptgcmodpptmfciecpcgsaCDBS基站涉及到的form有：cell2 cmmceqpcdmeqp bbueqpceqfacepptgcmodpptmfciecpcg

16、sa ECP RC/V Basic CommandsR ( Review C ( Change U ( Update I ( Insert D ( Delete V ( Validate rootPassword newsysAt ap prompt ./sm telnet RCS# CDM# mc (returnLogin lucentPassword passwordAt the ccc prompt gparamsChange (returnTo change a parameter, enter the new number to the right of the existing n

17、umber (return(see listing below for settings, China settings are in boldLogout by entering ctrl (returnAt the telnet prompt quit (returnChina-Unicom Standard Modular cell 3.0 compact Boot Memory Parameters:Microcell Number : 1Signaling Rate: 8 (64KLine Type: 1 (E1Link Port Config: 3 GPS Cable Length

18、: site specific (must be reset if GPS cable length exceeds 100GPS Current Feed: 0 (OFFVIM CODEC Law: 161 (A-Law for E1CSU A frame setting: 122 (E1 no CRCCSU A signaling: 127 (E1 CCSCSU A line coding: 132 (E1 HDB3CSU A line buildout: 150 (E1 Long Haul 120 OhmCSU A internal: 165 (internalCSU B frame s

19、etting: 161CSU B signaling: 122CSU B line coding: 127CSU B line buildout: 132CSU B internal: 165CSU options: null (255Extra field 1: null (255Extra field 2: null (255Frame_type (MOD 3.0:mLAM = 1;kLAM = 2;HD = 3: 1 Cell_type (HDR = 165, CDMA = 255: 255TX test port Cal: 65535CSU A timeslot Mask: 0xfff

20、fffffCSU B timeslot Mask: 0xffffffffConnected to ap37.Escape character is .SunOS 5.9login: rootPassword:Last login: Fri Nov 25 14:48:01 from apompSun Microsystems Inc. SunOS 5.9 Generic May 2002You have new mail.TERM is set to vt100.WARNING: YOU ARE SUPERUSER !ap37:root cd /ap/platform/default/suppo

21、rt/binap37:root lsapac_intf DBchgOwner RUpegdump UXiptraceAPcellmon DBdump_acc SATdiag UXlogsapchkcable DBdump_mem sm UXmemAPchkwd_proxyhb DBprxtrc ss7apstat UXmemrepAPeas DBtrace ss7aptail UXmt_testsaphubconfig DPSclient ss7clr.all UXperftailAPperf DPSquery SS7mmtest UXpingaprccsu_fix dumpmeas SS7m

22、mtool UXportprapSWlanall edelf SS7mmtrace UXportsetAPtool einstatmon tcmon UXsbtcmdCCMdump FLXping tcsim UXsnoopCCMipdump LMtool tlstat UXstatprCCMipTool LMtrace tune_parms UXtraceCCMread loadid UXbuglvl UXt_testsCDNmsgtrace LRutil UXbugtail UXvcdumpCMrcs LUgetlogs UXbugtoggle VCmsgtraceCMsgtrace ND

23、Mdiskrestore UXdeptest wd_disableCMtrace OCapmon UXerrtail whereDBcheck RUdump UXipap37:root ./CCMdumptotal sig. link update count = 894Link State rcs:cell:subunit 193:1:0 on ds1:ds0:slWidth :1:12:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 194:1:0

24、on ds1:ds0:slWidth :1: 7:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 195:1:0 on ds1:ds0:slWidth :1: 8:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 197:1:0 on ds1:ds0:slWidth :1: 9:1 state:reason =SL_

25、ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 198:1:0 on ds1:ds0:slWidth :1:13:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 199:1:0 on ds1:ds0:slWidth :1:10:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count =

26、 894Link State rcs:cell:subunit 203:1:0 on ds1:ds0:slWidth :1:14:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 204:1:0 on ds1:ds0:slWidth :1:11:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 205:1:0 on d

27、s1:ds0:slWidth :1:15:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 206:1:0 on ds1:ds0:slWidth :1:16:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 207:1:0 on ds1:ds0:slWidth :1:17:1 state:reason =SL_ACTI

28、VE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 208:1:0 on ds1:ds0:slWidth :1:18:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 210:1:0 on ds1:ds0:slWidth :1: 1:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894

29、Link State rcs:cell:subunit 211:1:0 on ds1:ds0:slWidth :1: 2:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 212:1:0 on ds1:ds0:slWidth :1: 3:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 213:1:0 on ds1:d

30、s0:slWidth :1: 4:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 218:1:0 on ds1:ds0:slWidth :1: 6:1 state:reason =SL_ACTIVE:RA_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 220:1:0 on ds1:ds0:slWidth :1: 5:1 state:reason =SL_ACTIVE:R

31、A_NULLtotal sig. link update count = 894Link State rcs:cell:subunit 223:1:0 on ds1:ds0:slWidth :1:19:2 state:reason =SL_ACTIVE:RA_NULLDS1# 1: state = DS1_ACTIVE, Alarm = ALM_NULL, Loopback state = LB_NOLOOPBACKEnd of reportap37:root ./sm telnet 194 1 mcEscape character is .VxWorks login: lucentPassw

32、ord:ccc- gparamsChange. = clear field; - = go to previous field; D = quitmicrocell number (1-6: 1Signaling Rate (8=64k,7=56k: 8Line Type : 1Link Port Config : 3GPS Cable Length : 50GPS Current Feed : 0VIM CODEC Law : 161CSU_A_frame_setting : 122CSU_A_signaling : 127CSU_A_line_coding : 132 10:42:50.5

33、30 (I2C :ERROR: I2CDriver:detectAck, NO ACK DETECTEDCSU_A_line_buildout : 150CSU_A_internal : 165CSU_B_frame_setting : 255CSU_B_signaling : 255CSU_B_line_coding : 255CSU_B_line_buildout : 255CSU_B_internal : 255CSU options : 255Extra field 1 : 255Extra field 2 : 255frame_type (MOD 3.0:kLAM = 2;HD =

34、3: 2 10:42:54.530 (I2C : ERROR:sendReadDataNonBurst:221 detect ack failed in sendReadDataNonBurstcell_type (HDR = 165, CDMA = 255: 255Tx Test Port Cal : 65535CSU A timeslot mask : 0xffffffffCSU B timeslot mask : 0xffffffffvalue = 0 = 0x0ccc-ccc- WDdcr 10= WD_CRASH_RECORD = Rev 4Boot #219 at: TUE AUG

35、 23 02:32:25 2005At 000 days 00:00:50 : RSM2bornot2b(, RSM_ACTIVE, oldstate= 0x0, cnt=001At 000 days 00:01:08 : MR_INIT: MR_L2UP_IND received from ap 0x1, cnt=001At 000 days 00:01:08 : MR_INIT: MR_L2UP_IND received from ap 0x2, cnt=001At 000 days 00:01:12 : PbmMain_PrimaryLoop(, START. 0xfd, cnt=001

36、At 000 days 00:01:21 : MCC ALARM : 0x10100ff, cnt=001At 000 days 00:01:21 : MCC ALARM : 0x10400ff, cnt=001At 000 days 00:01:22 : MCC ALARM : 0x10700ff, cnt=001At 000 days 00:01:24 : MCC ALARM : 0x10100ff, cnt=001At 000 days 00:01:24 : MCC ALARM : 0x10400ff, cnt=001At 000 days 00:01:24 : MCC ALARM :

37、0x10700ff, cnt=001At 000 days 00:03:16 : MCC DS1A_ALM HW err: 0x10010104, cnt=001At 000 days 00:03:16 : MCC DS1A_ALM HW err: 0x50010104, cnt=001At 000 days 00:03:16 : MCC DS1A_ALM HW err: 0x40010104, cnt=001At 000 days 00:03:19 : MCC DS1A_ALM HW err: 0x60010104, cnt=001At 000 days 00:03:25 : Missed

38、RCS HRTBT 0x1, cnt=001* 6 error msgs were lost *At 000 days 00:03:44 : MCC ALARM : 0x10700ff, cnt=001At 000 days 00:03:48 : MCC ALARM : 0x10100ff, cnt=001At 000 days 00:03:48 : MCC ALARM : 0x10400ff, cnt=001At 000 days 00:03:52 : Missed RCS HRTBT 0x4, cnt=001At 000 days 00:04:01 : Missed RCS HRTBT 0

39、x5, cnt=001Reboot: LOST HRTBT, reason_id=35, state=4000load_type: OFC, GDF=F2205DDGA.00Kernel: WIND version 2.5, Made on Jan 20 2005, 23:40:37.250 u=lucent f=0x8Up Time: 000 days 00:04:02Boot #220 at: TUE AUG 23 02:36:50 2005At 000 days 00:00:50 : RSM2bornot2b(, RSM_ACTIVE, oldstate= 0x0, cnt=001At

40、000 days 00:01:06 : MR_INIT: MR_L2UP_IND received from ap 0x1, cnt=001At 000 days 00:01:41 : MR_ACT:MR_L2DN_IND recvd. from ap 0x1, cnt=001At 000 days 00:01:41 : Mrsend_msg_to_mc:MR_DISC_IND 0x1, cnt=001At 000 days 00:05:09 : MR_DOWN: MR_L2UP_IND received from ap 0x1, cnt=001At 000 days 00:05:10 : M

41、R_ACT:MR_L2DN_IND recvd. from ap 0x1, cnt=001At 000 days 00:05:10 : Mrsend_msg_to_mc:MR_DISC_IND 0x1, cnt=001Reboot: RM_RESET, reason_id=5, state=4000load_type: OFC, GDF=F2205DDGA.00Up Time: 000 days 00:05:11Boot #221 at: TUE AUG 23 02:42:18 2005At 000 days 00:00:50 : RSM2bornot2b(, RSM_ACTIVE, olds

42、tate= 0x0, cnt=001At 000 days 00:01:24 : MR_INIT: MR_L2UP_IND received from ap 0x1, cnt=001At 000 days 00:01:24 : MR_INIT: MR_L2UP_IND received from ap 0x2, cnt=001At 000 days 00:01:28 : PbmMain_PrimaryLoop(, START. 0xfd, cnt=001At 000 days 00:01:37 : MCC ALARM : 0x10100ff, cnt=001At 000 days 00:01:

43、37 : MCC ALARM : 0x10400ff, cnt=001At 000 days 00:01:37 : MCC ALARM : 0x10700ff, cnt=001At 000 days 00:01:40 : MCC ALARM : 0x10100ff, cnt=001At 000 days 00:01:40 : MCC ALARM : 0x10400ff, cnt=001At 000 days 00:01:40 : MCC ALARM : 0x10700ff, cnt=001At 000 days 00:04:00 : MCC ALARM : 0x10400ff, cnt=001

44、At 000 days 00:04:00 : MCC ALARM : 0x10700ff, cnt=001At 000 days 00:04:04 : MCC ALARM : 0x10100ff, cnt=001At 000 days 04:37:17 : SW3 MCC Assert: 0x5680, cnt=018At 067 days 08:18:06 : SWx Lost NDP HB 0xf7b2, cnt=003* 77 error msgs were lost *At 067 days 08:17:47 : Missed RCS HRTBT 0x3, cnt=001At 067

45、days 08:17:56 : Missed RCS HRTBT 0x4, cnt=001At 067 days 08:18:05 : Missed RCS HRTBT 0x5, cnt=001At 067 days 08:18:05 : MR_ACT:MR_L2DN_IND recvd. from ap 0x1, cnt=001At 067 days 08:18:05 : Mrsend_msg_to_mc:MR_DISC_IND 0x1, cnt=001peg_group 0: 2=1Reboot: LOST HRTBT, reason_id=35, state=4000load_type:

46、 OFC, GDF=F2205DDGA.00Kernel: WIND version 2.5, Made on Jan 20 2005, 23:40:37.250 u=lucent f=0x8Up Time: 067 days 08:18:06Boot #222 at: SAT OCT 29 11:01:12 2005At 000 days 00:00:50 : RSM2bornot2b(, RSM_ACTIVE, oldstate= 0x0, cnt=001At 000 days 00:01:07 : MR_INIT: MR_L2UP_IND received from ap 0x1, cn

47、t=001At 000 days 00:01:08 : MR_INIT:MR_L2DN_IND recvd. from ap 0x1, cnt=001At 000 days 00:01:08 : Mrsend_msg_to_mc:MR_DISC_IND 0x1, cnt=001At 000 days 00:10:43 : SWx Lost NDP HB 0xf7b2, cnt=005At 000 days 00:10:43 : SWx Lost NDP HB 0xf7a2, cnt=001Reboot: MCC APP REQUEST, reason_id=6, state=4000load_type: OFC, GDF=F2205DDGA.00Kernel: WIND version 2.5, Made on Jan 20 2005, 23:40:37.250 u=lucent f=0x8Up Time: 000 days 00:10:43Boot #223 at: SAT OCT 29 11:12:12 2005At 000 days 00:00:50 : RSM2bornot2b(, R