二層交換機的兩個vlan互相訪問_第1頁
二層交換機的兩個vlan互相訪問_第2頁
二層交換機的兩個vlan互相訪問_第3頁
免費預覽已結束,剩余1頁可下載查看

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、LaprtW-PTLsptap-P'lLI pCCf FTLipt0)2LaplODPTLJpt0t>3假如A交換機vian100,vlan200,B 交換機vian300,vlan400,怎樣配置可以讓vlan300 不能訪問 vian100?vlan200 可以訪問 vian400?有多種方法可以實現:比如PVLAN , ACL等。按照你的拓?fù)?,我用PT模擬了一種做法:單臂路由+ACL,可以參考一下,有圖,有配置: JT,r281t<舟 'Si鼻衆:直訕 羽130fD/Ll-lt V1ZD0 i« i«e i iriziOA2-3 kluJO

2、O1 囂 IM 3. 11-12fo/n-12 vitftioo160 E. 11-12交換機A:in terface FastEthernetO/2 switchport access vlan 100 switchport mode access !in terface FastEthernet0/3switchport access vlan 100 switchport mode access !in terface FastEthernetO/11 switchport access vlan 200 switchport mode access !in terface FastEt

3、hernet0/12 switchport access vlan 200 switchport mode accessin terface FastEthernetO/1switchport trunk allowed vlan 100,200 switchport mode trunk交換機B:in terface FastEthernet0/2switchport access vlan 300switchport mode access!in terface FastEthernet0/3switchport access vlan 300switchport mode access!

4、in terface FastEthernet0/11switchport access vlan 400switchport mode access!in terface FastEthernet0/12switchport access vlan 400switchport mode access!in terface FastEthernet0/1switchport trunk allowed vlan 300,400switchport mode trunkRouter:in terface FastEthernet0/0.1en capsulation dot1Q 100ip ad

5、dress !in terface FastEthernet0/0.2en capsulation dot1Q 200ip address 192.16821 !in terface FastEthernet0/1.1en capsulation dot1Q 400ip address 192.16841 in terface FastEthernetO/1.2encapsulation dot1Q 300ip access-group 1 out!access-list 1 permi

6、t any60 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4) Cisco WS-C2960-24TT (RC32300) processor (revisio n C0) with 21039K bytes of memory. 2960-24TT starti ng.Xmodem is available.Initializing Flash.flashfs0: 1 files, 0 directoriesflashfs0: 0 orphaned files, 0 orphaned direct

7、oriesflashfs0: Total bytes: 64016384flashfs0: Bytes used: 4414921flashfs0: Bytes available: 59601463flashfs0: flashfs fsck took 1 sec on ds.do ne In itializ ing Flash.Boot Sector (bs:) in stalled, fsid: 3Parameter Block (pb:) in stalled, fsid: 4Loadi ng "flash:/c2960-la nbase-m z. 122-25.FX.bi

8、n".# OKRestricted Rights Lege ndUse, duplicati on, or disclosure by the Government issubject to restrict ions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Tech ni cal Data and Co

9、mputerSoftware clause at DFARS sec. 252.227-7013.cisco Systems, Inc.170 West Tasman DriveSan Jose, California 95134-1706Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2005 by Cisco Systems, Inc.Compiled Wed 12-Oct-05 22:05 by pt_tea

10、mImage text-base: 0x80008098, data-base: 0x814129C4Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.24 FastEthernet/IEEE 802.3 interface(s)2 Gigabit Ethernet/IEEE 802.3 interface(s)63488K bytes of flash-simulated non-volatile configuration memoryBase ethernet MAC Add

11、ress Motherboard assembly number Power supply part number Motherboard serial number Power supply serial number Model revision number Motherboard revision number Model number System serial number Top Assembly Part Number Top Assembly Revision Number Version ID CLEI Code Number: : 73-9832-06: 341-0097

12、-02: FOC103248MJ: DCA102133JA: B0: C0: WS-C2960-24TT: FOC1033Z1EY: 800-26671-02: B0: V02: COM3K00BRA: 0x01Switch Ports ModelSW VersionSW Image1 26 WS-C2960-24TT 12.2C2960-LANBASE-MHardware Board Revision NumberCisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE

13、 (fc1)Copyright (c) 1986-2005 by Cisco Systems, Inc.Compiled Wed 12-Oct-05 22:05 by pt_teamPress RETURN to get started!%LINK-5-CHANGED: Interface Vlan1, changed state to up%LINK-5-CHANGED: Interface Vlan1, changed state to administratively down%SYS-5-CONFIG_I: Configured from console by console%LINK

14、-5-CHANGED: Interface FastEthernet0/1, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up%LINK-5-CHANGED: Interface FastEthernet0/2, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up%LINK-5-CHA

15、NGED: Interface FastEthernet0/12, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up%LINK-5-CHANGED: Interface FastEthernet0/13, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to upSwitch>enableSwitch#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#interface FastE

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論