x620flashone救機包刷機工具.9readme

1、安裝說明1.1將壓縮包解壓到不含中文，不含空格的目錄，雙擊main.exe運行刷機工具1.2. adb, fastboot命令已經預置，不需要安裝，但需要安裝360手機助手等以保證可以自動安裝手機驅動1.3.如果用到qfil刷機，請先安裝qfil驅動，驅動放在driver目錄下，安裝時請先斷開網絡，安裝完畢后請重啟電腦1.4. 刷機過程中不要斷開連接線1.5. 多次刷機的時候會提示“解壓縮文件夾已經存在，是否需要重新解壓縮？”， 選否不用再次解壓縮，直接升級1.6. 刷userdata選項，用戶選“是”會丟數據，選“否”不丟數據，但是可能升級不徹底，建議刷機前備份數據1.7. 升級包會解壓到刷

2、機工具包中，因?yàn)樗C(jī)包比較大，請保證磁盤空間足夠1.8請將最新的軟件/硬件兼容性表格放到刷機工具所在文件夾下主要功能介紹2.1系統更新當電腦連網情況下，刷機工具啟動時會檢測服務器上是否有最新版本，如果有新版本會彈出更新提示框2.2下載兼容性表格在菜單中有GetHSCT菜單項，點擊此菜單，會直接下載最新的兼容性表格，同時會將本地的hsct表格備份到HSCTBackup文件夾下，備份文件的后綴為當時的時間點。如果因?yàn)榫W(wǎng)絡問題或者其他原因下載失敗，會彈出下載失敗的提示框，同時會把原來的文件拷貝回來。如果下載的文件格式不正確，也會彈出提示框，同時把原來可用的文件拷貝回來。2.3 fastboot刷機刷

3、機方式默認為fastboot，同時按住電源鍵和音量減使手機進入fastboot模式，然后連上數據線，等手機驅動安裝完畢后，點擊刷新設備，將顯示設備序列號和設備類型，如果設備沒有刷過deviceInfo分區，將不現實設備類型，此時想要正常刷機可以選擇強制刷機按鈕，這樣工具將不會校驗硬件和軟件版本是否匹配，需要自己判斷選擇對應的刷機包（zip包），zip包不要放在中文路徑下選擇是否刷userdata點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓文件，等文件解壓完畢后將自動刷機，進度條將顯示刷機進度，同時會顯示刷機的log刷機完成或者出現錯誤時都會有提示框彈

4、出2.4 qfil刷機刷機方式選擇qfil后，同時按電源鍵，音量增減鍵使手機進入qfil模式，然后連上數據線，等手機驅動安裝完畢，點擊刷新設備將顯示所有的qfil可用串口號，選擇相應的串口號，注意不要連接其他高通設備，否則會影響刷機選擇對應的刷機包（zip包），zip包不要放在中文路徑下(請自己確認刷機包，qfile模式下工具無法判斷刷機包與手機是否匹配)點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓文件，等文件解壓完畢后將自動刷機，進度條將顯示刷機進度，同時會顯示刷機的log刷機完成或者出現錯誤時都會有提示框彈出2.5 mtk刷機刷機方式選擇mtk后

5、，選擇對應的刷機包（zip包），zip包不要放在中文路徑下(請自己確認刷機包，mtk模式下無法判斷刷機包與手機是否匹配)點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓文件，等文件解壓完畢后將自動開始刷機，此時會彈出“請?jiān)谝环昼妰?nèi)插入設備”的提示框，此時需要在一分鐘內按音量加同時插USB線，然后將自動開始刷機，同時進度條顯示刷機進度，log也將顯示在界面上。刷機完成或者刷機出現錯誤時都會彈出提示框1. Install1.1 Unzip the zip file to the directory not include Chinese and not in

6、clude blank space, and double click main.exe to run flash tool.1.2. adb, fastboot commands are preset, dont need to install, but need install phone assistant, so make sure phone driver can be installed automatically.1.3. When flash with qfil type, you need to install qfil driver first, the driver is

7、 under driver folder, please disconnect network when install the driver, and restart the pc after install completed.1.4. Please dont disconnect the USB cable during flashing.1.5. When flash with same flash file, tips Decompression folder already existed, re-decompress or not?, select no, will not de

8、compress and flash directly.1.6. If choose flash userdata, all user data will be lost, else not, but flash maybe incompletely, so suggest to backup data before flashing.1.7. Flash zip file will decompressed into flash tool folder, so please make sure there is enough space.1.8Please put the latest HW

9、/SW compatibility file into the folder of flash tool.2. Main Function2.1 System UpdateIf the network is connected, when flash tool start, it will check if there is new version on server, if yes, pop up update dialog.2.2 Download HSCT FileThere is GetHSCT menu on menu bar, press this menu, will downl

10、oad HSCT file directly, and backup the local hsct file to HSCTBackup folder, the suffix of the backup file is the time when you back up the file.If the file download failed with network or other issue, there will be a download failed dialog pop up, and copy the file back from HSCTBackup folder.If th

11、e format of the downloaded file is not correct, there will be also a dialog pop up, and copy the file back from HSCTBackup folder also.2.3 Fastboot FlashThe default flash type is fastboot, when select fastboot flash type, press power key and volume down key at the same time, then phone will enter in

12、to fastboot mode. Connect with USB cable, wait for install driver automatically, then press Refresh button, serial No. and device type will show on UI, maybe some phones cant display device type, thats because these phones didnt flash devinfo part, these phones need to upgrade to new version. But be

13、fore upgrade, you can select Force Flash to flash the phone, in this situation, you should check if the software and hardware is matching yourself.Select corresponding flash zip file, the path of zip file should not contain Chinese and special character.Select Flash Userdata or notPress Flash button

14、, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, Decompression folder already existed, re-decompress or not? dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatical

15、ly, and the progress bar display flashing progress, and at the same time, the flashing log will also be shown on UI.After flash complete or error happened, a notification dialog will pop up.2.4 qfil FlashWhen select qfil flash type, press power key, volume up and volume down key at the same time, th

16、en the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press Refresh button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.Select corresponding flash zip file,

17、 the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool cant get hardware information, you should check if the software and hardware is matching yourself.)Press Flash button, then start to unzip flash zip file to current folder, but if there is already a co

18、rresponding unzip file existing, Decompression folder is exist, re-decompress or not? dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress, and at the same time, the flashing log

19、will also be shown on UI.After flash complete or error happened, a notification dialog will pop up.2.5 mtk FlashWhen select mtk flash type, select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under mtk mode, the tool cant get hardware information, you should check if the software and hardware is matching yourself.)Press Flash button, then sta