u-11u33系列單串口升級平臺sn tool introduce

1、SN Tool Introduce2013/07/17Presenter (Wenping Liu)Department (ACS7/ST)AgendaSN write option introduceBarcode、IMEI、BT Address、Wi-Fi Mac AddressHdcp & Drm keySN Tool special settingNew SN Tool UISN Tool new main panelNew UI Modify ItemAdd Login Identify : Engineer & OperatorSystem configMove some sele

2、ct option to menuNew scan data dialogSN Tool write procedure exampleBarcode & IMEI(Meta Mode)Barcode / IMEI / BT / Wi-Fi (Meta Mode)Hdcp & Drm key(Meta Mode)How to debug when write fail2022/7/14Copyright MediaTek Inc. All rights reserved.1SN write option introduceBarcode、IMEI、BT Address 、Wi-Fi Mac A

3、ddressBarcodeProduction Serial Number for a PCBA, is usually use to identify PCBA. Each PCBA should have a barcode number to keep the its test item in production line.Barcode should be write to PCBA after download and before ATE calibration, because in the calibration station, ATE Tool will write Ca

4、libration flag and NSFTflag to barcode. If you rewrite use SN Tool, these flags will be cover.Support max 64 characters, composed of letters and numbers.IMEIInternational Mobile Equipment Identity, is a number unique to every GSM and WCDMA phone.Must be 15 decimal digits, 14 decimal digits + 1 check

5、sum digit.BT AddressMust be 12 characters, composed of letters(a - f or A - F) and numbers.Wi-Fi Mac AddressMust be 12 characters, composed of letters(a - f or A - F) and numbers.2022/7/14Copyright MediaTek Inc. All rights reserved.3Hdcp & Drm keyHdcp keyHigh-bandwidth Digital Content Protection, wh

6、en users of illegal copying, the technology will be interference, reduce duplicated image quality, so as to protect the content. the hdcp key bin need purchased by customer.Write hdcp key need Ap database.Drm keySome Digitized audio programs have Protection of digital programs authorized centers, so

7、 must have drm key when Broadcast programWrite drm key dont need any database2022/7/14Copyright MediaTek Inc. All rights reserved.4Special settingSN Tool Menu - Option Mode selectMETA modeTarget will enter META mode to write Barcode、IMEI、BT、Wi-FiNeed select correct database fileSupport all Feature P

8、hone、Smart Phone and Datacard productAT modeTarget will normal bootup and use AT cmd to write Barcode、IMEI、BT、 Wi-FiDont need select database fileCurrent only support feature phone to write barcode、IMEIFeaturePhone Option / AT_SDSUse AT mode and want to trigger backup data to SDS, need select this o

9、ption DatacardFor Datacard product, enable USBSwitchToolExternal ModemFor DualTalk project, enable preloader comPort switch to single comPortSP Security USBFor Smart Phone security chip2022/7/14Copyright MediaTek Inc. All rights reserved.5Special settingSN Tool Menu - BT&IMEI Check SumEnable IMEI ch

10、ecksum mechanism, the last IMEI bit will be calculate and replace last bit get from UI. Ex, UI input 1111 1111 1111 111 will be replace by 1111 1111 1111 119 , the 9 is the checksum bit. Lock IMEIif check the Lock IMEI, this mean the IMEI can only write one time when current operator is successfully

11、. If you want to rewrite IMEI again, you must Format FAT!If is MT6582 smart phone, modify SN_SETUP.txt in installation directoryIs MT6582 World Phone True: for MT6582 smart phoneFalse: for another without world phone feature platform, include feature phoneWorld Phone MD Index1: Enable Modem1 when bo

12、ot up2: Enable Modem2 when boot upWorld Phone SW Version 3 : WCDMA phone 5 : TDD phone2022/7/14Copyright MediaTek Inc. All rights reserved.6New SN Tool UISN Tool new main panel2022/7/14Copyright MediaTek Inc. All rights reserved.8Old SN ToolNew SN ToolNew UI Modify Item Add menu “Identify”Engineer :

13、 Login in engineer modeCan Modify UI configurationSwitch To operator dont need passwordOperator : Login in operator modeNo authority modify UI configurationSwitch to engineer mode need passwordAdd button “System Config”Setup write barcode、IMEI、BT、Wi-Fi optionSetup the database filesMove some select

14、option to menuAT or Meta mode select OptionHdcp、DRMKey file select Hdcp&DrmkeyDatacard、External Modem、SP Security USB Option2022/7/14Copyright MediaTek Inc. All rights reserved.9Engineer ModeEngineer ModeEngineer mode use for setup all write option, such as select database file, setuphead check stri

15、ng. The mode is the default login mode, The default password is 0000.Use the Menu Identity-Engineer-SwitchToOperator to switch to operatormode, dont password. Use the Menu Identity- Engineer- ChangePasswd to modify the engineer password.Operator ModeOperator ModeOperator mode have no authority modif

16、y UI configuration. This mode only have select comPort num、click Quit and Start button authority.Identify-Operator-SwitchToEngineerSwitch to engineer mode, need input the correct engineer password.System configFunction SelectThe option is about which type datawill be write to target at one time. Ex,

17、 if select IMEI&BT, you can write IMEI and BT address to target at one time. Header OptionFor you want to check the scan data is valid or not, turn on the header check. Ex, if barcode previous 4bits must “1234”,turn on check barcode header, and configuration the barcode header string is “1234”.IMEI

18、OptionIMEI special optionData BaseSelect database filesNew scan data dialogScan DataEnable the edit control option base onwhat do you select in the configuration panel. If Header check is turn on, the corresponding header string will show on edit control tail.The current scan data will be highlight.

19、The edit control dont need scan again when scan data finish and header check pass.When finish scan all data and click OK,tool will check all data is valid or not. If the data is invalid, corresponding edit control will be highlight.When finish one write flow, this panel will be show again.SN Tool wr

20、ite procedure example1、select comPort UART or USB 2、select target type FP/SP/Rndis Dongle/3、select write mode MEAT mode /AT mode4、click System Config button5、Function select choose Barcode & IMEI6、Header option if check data, turn it on7、select correct database files8、Click Start to scan data9、Inser

21、t cable make phone enter META mode10、If Write Result Indicator turn - Green mean write success - Red mead write failBarcode & IMEI(Meta Mode)2022/7/14Copyright MediaTek Inc. All rights reserved.155683104219Enter Meta mode1、select comPort UART or USB 2、select target type FP/SP/Rndis Dongle/3、select w

22、rite mode MEAT mode /AT mode4、click System Config button5、Function select choose Barc/IMEI/BT/Wi-Fi6、Header option if check data, turn it on7、select correct database files8、Click Start to scan data9、Insert cable make phone enter META mode10、If Write Result Indicator turn - Green mean write success -

23、 Red mead write failBarcode / IMEI / BT / Wi-Fi(Meta Mode)2022/7/14Copyright MediaTek Inc. All rights reserved.165683104219PhoneEnter Meta mode1、選擇 端口類型 UART 或者 USB 2、選擇 手機類型 FP/SP/Rndis Dongle/3、選擇 寫號模式 MEAT mode /AT mode4、點擊系統配置 按鈕5、寫號類型選項 選擇寫 IMEI & BT6、頭部檢測功能選項 需要檢測數據正確性, 勾選On/Off按鈕7、選擇正確的Database文件8、點擊開始按鈕輸入或掃描正確的數據9、插入USB或UART數據線，讓手機進入META模式10、如果寫操作結果指示器變成 - 綠色表示寫操作成功 - 紅色表示寫操作失敗IMEI / BT(Meta Mode)2022/7/14Copyright MediaTek Inc. All rights reserved.175683104219手機開機進META 模式1、select comPort UART or USB 2、select target type FP/SP/Rndis Dongle/3、select write HDCP & DRM Key