網絡設備配置與管理項目總結

1、一：實訓目的和要求通過課程所學內容對網絡設備配置，以完成實訓內容，達到要求的效果二：實訓任務pc2、pc3、pc4能相互訪問；pc4能訪問pci；pc2、pc3不能訪問pci；pci可以訪問pc2的web服務；配置NAT使之處于私網內的pc2、pc3、pc4可以訪問外網路由器之間ppp協議用CHAP驗證三：拓?fù)鋱D四：設備六：最終目標1.PC1可以訪問PC2web服務2.PC2，PC3, PC4 相通3.PC4能訪問PC1，PC2、PC3不能訪問PC七：實訓步驟（1）交換機SWA的配置reset saved-configurationsystem-viewsysname SWAvlan 100Q

2、uitInterface eth 1/0/1 port link-type access port access vlan 100 interface eth 1/0/2 port link-type access port access vlan 100 Quit vlan 10interface eth 1/0/22 port link-type trunk port trunk permit vlan 10 100 interface eth 1/0/24 port link-type trunkport trunk permit vlan 10 100 quit（2）交換機SWB的配置

3、reset saved-configurationsystem-viewsysname SWBvlan 10port eth 0/1quitvlan 100quitinterface eth 0/22port link-type trunkport trunk permit vlan 10 100quit（二）路由器的配置1.路由器R1的配置reset saved-configuration system-viewinterface s 0/0ip address quitRipNetwork Quit(1)單臂路由的相關配置interface eth 0/0.10vlan-type dot1

4、q vid 10ip address interface eth 0/0.20vlan-type dot1q vid 100ip address quit(2) Easy IP配置方法acl number 2000rule 0 deny permit source 55Quitinterface s 0/0nat outbound 2000quit(3)配置 NAT serverinterface s 0/0nat server protocol tcp global 0 www inside www quit(4) PPP的chap驗證配置過程(路由器R1設為主驗證方)Local-user

5、R1Password simple helloService-type pppQuitInterface s 0/0Link-protocol pppPpp chap user R1Undo shutdownQuitReset saved-configurationSystem-viewInterface s 0/0Ip address Interface e 0/0Ip address Quitrip路由的配置RipNetwork Network QuitPPP協議的chap驗證配置 Local-user R1Password simple hello Service-type ppp QuitInterface s 0/0Link-protoco