【BS英國標準】BS EN 13261-2003 鐵路設備 輪組和轉向架 軸 產品要求.doc

british standard bs en13261:2003railway applications wheelsets and bogies axles product requirementsthe european standard en 13261:2003 has the status of abritish standardics 45.040 reproduced by ihs under license with bsilicense provided by i.h.s. germanyfor internal use onlybs en 13261:2003national forewordthis british standard is the official english language version ofen 13261:2003. it supersedes bs 5892-1:1992 which is withdrawn.the uk participation in its preparation was entrusted by technical committee rae/3, railway rolling stock material, to subcommittee rae/3/-/1, wheels and wheelsets, which has the responsibility to:aid enquirers to understand the text;present to the responsible international/european committee any enquiries on the interpretation, or proposals for change, and keep the uk interests informed;monitor related international and european developments and promulgate them in the uk.a list of organizations represented on this subcommittee can be obtained on request to its secretary.cross-referencesthe british standards which implement international or european publications referred to in this document may be found in the bsi catalogue under the section entitled “international standards correspondence index”, or by using the “search” facility of the bsi electronic catalogue or ofbritish standards online.this publication does not purport to include all the necessary provisions of a contract. users are responsible for its correct application.compliance with a british standard does not of itself confer immunity from legal obligations.this british standard, was published under the authority of the standards policy and strategy committee on24 october 2003 bsi 24 october 2003isbn 0 580 42837 0summary of pagesthis document comprises a front cover, an inside front cover, the en title page, pages 2 to 51 and a back cover.the bsi copyright notice displayed in this document indicates when the document was last issued.amd. no.datecommentsamendments issued since publicationeuropean standard norme europenneeuropische normen 13261september 2003ics 45.040english versionrailway applications - wheelsets and bogies - axles - product requirementsapplications ferroviaires - essieux monts et bogies - essieux-axes - prescriptions pour le produitbahnanwendungen - radstze und drehgestelle - radstze - produktanforderungenthis european standard was approved by cen on 14 february 2003.cen members are bound to comply with the cen/cenelec internal regulations which stipulate the conditions for giving this european standard the status of a national standard without any alteration. up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the management centre or to any cen member.this european standard exists in three official versions (english, french, german). a version in any other language made by translation under the responsibility of a cen member into its own language and notified to the management centre has the same status as the official versions.cen members are the national standards bodies of austria, belgium, czech republic, denmark, finland, france, germany, greece, hungary, iceland, ireland, italy, luxembourg, malta, netherlands, norway, portugal, slovakia, spain, sweden, switzerland and united kingdom.european committee for standardization c o m i t eur o p en de nor m a l i s a ti on eur o p i s c h es kom i tee f r nor m ung management centre: rue de stassart, 36 b-1050 brussels 2003 cenall rights of exploitation in any form and by any means reserved worldwide for cen national members.ref. no. en 13261:2003 een 13261:2003 (e)contentspageforeword .4introduction.51scope .52normative references .63product definition.63.1chemical composition .63.2mechanical characteristics .73.3microstructure characteristics.123.4material cleanliness.133.5permeability to ultrasound.143.6residual stresses .153.7surface characteristics .173.8geometrical and dimensional tolerances.203.9protection against corrosion and against mechanical aggression.253.10marking .29annex a (normative) particular characteristics for axles of steel grade ea1t and ea4t .30a.1chemical composition .30a.2mechanical characteristics .30a.3microstructure characteristics.31annex b (normative) standard wedge for measurement of permeability to ultrasound .32b.1test piece .32b.2tolerances of the wedge .32b.3steel grade.32annex c (normative) method to assess resistance to impact of the coating.33c.1principle.33c.2test piece .33c.3apparatus .33c.4procedure .33c.5expression of results .33annex d (normative) method to assess resistance to gritting of the coating .34d.1principle.34d.2test piece .34d.3apparatus .34d.4procedure .34d.5expression of results .34annex e (normative) method to assess the resistance of the coating to specific corrosive products.35e.1 principle.35e.2 test piece .35e.3 apparatus .35e.4 corrosive products .35e.5 procedure .35e.6 expression of results .36annex f (normative) method to assess the resistance of the coating to cyclic mechanicalstresses .37f.1purpose.372en 13261:2003 (e)f.2principle . 37f.3test piece. 37f.4apparatus. 37f.5procedure. 37f.6expression of results . 38annex g (normative) measurement of the hydrogen content in the steel for axles at the melting stage. 39g.1sampling . 39g.2analysis methods . 39g.3precautions. 39annex h (informative) drawings of test pieces . 40annex i (informative) product qualification . 42i.1general. 42i.2requirements. 42i.3qualification procedure. 43i.4qualification certificate . 44i.5qualification file. 45annex j (informative) product delivery. 46j.1general. 46j.2delivery condition. 47j.3controls on each axle. 47j.4batch control . 48j.5quality plan . 49j.6allowable rectification . 50bibliography . 513en 13261:2003 (e)forewordthis document en 13261:2003 has been prepared by technical committee cen/tc 256 “railway applications”, the secretariat of which is held by din.this european standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by march 2004, and conflicting national standards shall be withdrawn at the latest by march 2004.according to the cen/cenelec internal regulations, the national standards organizations of the following countries are bound to implement this european standard: austria, belgium, czech republic, denmark, finland, france, germany, greece, hungary, iceland, ireland, italy, luxembourg, malta, netherlands, norway, portugal, slovakia, spain, sweden, switzerland and the united kingdom.this document has been prepared under a mandate given the cen by the european commission and theeuropean free trade association, and supports essential requirements of eu directive(s). annexes a, b, c, d, e, f and g are normative. annexes h, i and j are informative.this document contains a bibliography.according to the cen/cenelec internal regulations, the national standards organizations of the following countries are bound to implement this european standard: austria, belgium, czech republic, denmark, finland, france, germany, greece, hungary, iceland, ireland, italy, luxembourg, malta, netherlands, norway, portugal, slovakia, spain, sweden, switzerland and the united kingdom.4en 13261:2003 (e)introductionnormative documents which have been used until now in europe for axle delivery (uic leaflets, national standards) had, for the main purpose, a complete definition of delivery procedures and axle characteristics that were to be measured.product qualification was sometimes mentioned but the procedures and the characteristics that had to be verified for the qualification were not given.this standard addresses these issues by:a) definition of all axle characteristics. these are verified either during qualification or delivery of the product(see clause 3);b)definition of qualification procedures (see informative annex i);c)definition of delivery conditions (see informative annex j). here, a choice is given to the supplier of either:atraditional deliveryprocedurewith acontrolbybatchsamplingasinexisting documents (see j.4), ora delivery procedure using quality assurance concepts (see j.5).1scopethis european standard specifies the characteristics of axles for use on european networks.it defines characteristics of forged or rolled solid and hollow axles, made from vacuum-degassed steel grade ea1n1) that is the most commonly used grade on european networks. for hollow axles, this standard applies only to those that are manufactured by machining of a hole in a forged or rolled solid axlein addition, the particular characteristics for axles in grade ea1t1) and ea4t1) are given in annex a (normative).two categories of axle are defined, category 1 and category 2. generally, category 1 is chosen when the operational speed is higher than 200 km/h.this standard is applicable to axles that are designed in accordance with the requirements of en 13103 anden 13104note different values for some characteristics may be agreed if a particular process of fabrication (e.g cold rolling, shot peening) has an influence on them.1) n for the normalized metallurgical conditiont for the quenched and tempered metallurgical condition5en 13261:2003 (e)2normative referencesthis european standard incorporates by dated or undated reference, provisions from other publications. these normative references are cited at the appropriate places in the text and the publications are listed hereafter. for dated references, subsequent amendments to or revisions of any of these publications apply to this european