木材浮壓干燥過程的傳熱傳質

1、木材浮壓干燥過程的傳熱傳質(作者：伊松林 導師：張璧光教授、常建民教授)摘要 木材干燥是木材加工與利用的基礎環節，其能耗約占木制品生產總能耗的40%70%。對木材進行正確合理的干燥處理，既是保證木制品質量的關鍵，又是木材合理利用和節約木材的重要手段，其重要性和經濟效果也越來越被人們所認識、所實踐。傳統的干燥方法通常是以濕空氣作為干燥介質，將空氣溫度、相對濕度和氣流速率作為控制木材干燥過程的“三要素”。然而，在影響木材內部水分移動和表面蒸發強度的外部因素中，周圍空氣的壓力也同樣是一個決定性的因素。木材的浮壓干燥就是在充分考慮了外界壓力影響的基礎之上，出現的一種新型的干燥技術。它與傳統的常規蒸汽干

2、燥以及通常意義上的真空干燥相比，最主要的區別在于是以過熱蒸汽作為干燥介質，且將壓力因素從基本保持壓力不變擴展到改變壓力并使其浮動。這種環境壓力的波動可大大加快木材內部水分的移動速率，而且在整個浮壓干燥過程中，木材表面始終處于濕潤狀態，從而可以有效地防止因表面水分蒸發過程快而導致木材干燥應力的增加，進而防止開裂和變形的產生。木材的浮壓干燥以其干燥速率快、質量好等一系列突出的優點，日益受到木材干燥界的廣泛重視，被國際上認為是最具發展前景的木材干燥新工藝。在目前我國木材供需矛盾日益突出的今天，研究開發這種干燥工藝和技術，對提高干燥質量和干燥效率，節約木材具有重要意義。浮壓干燥技術盡管在德國、丹麥、法

3、國、加拿大等國有小規模的工業應用，但諸多工藝問題并未從機理上得到根本的解決。目前，國內外對木材浮壓干燥的理論研究還比較少見，關于浮壓干燥的干燥特性和干燥規律等方面缺乏系統深入地研究，特別是對浮壓干燥過程中木材內部熱質傳遞規律的研究尚屬空白。因此，開展浮壓干燥的基礎研究與實用性試驗，將具有重要的理論意義和實用價值。本篇論文來源于國家自然基金課題（59876005），其研究?jī)?nèi)容與實際生產需要密切相關，著眼于當前急需解決的進口硬闊葉材等難干材以及速生材和幼齡材的干燥問題。本論文以木材的浮壓干燥為背景，在其實用價值最大的壓力區段即負壓區段進行試驗研究。文中首先從浮壓干燥的干燥介質特性入手，通過對木材浮

4、壓干燥的基本規律以及干燥過程中木材內部熱質傳遞規律等方面的研究，建立了木材浮壓干燥熱質傳遞的數學模型，進而為浮壓干燥工藝的優化設計和過程控制提供理論依據。這一探索性的研究，以全新的理念為木材干燥技術的創新和發展開辟了一條嶄新的道路。本研究主要成果與創新點如下：1.從干燥介質的熱力學特性出發，對真空狀態下過熱蒸汽和空氣干燥“逆轉溫度”的存在進行了深入的理論分析，求解了真空狀態下過熱蒸汽干燥 “逆轉溫度”的理論模型，并首次通過空氣與過熱蒸汽干燥的對比試驗發現了真空狀態下過熱蒸汽干燥“逆轉溫度”的存在。在僅有對流換熱的條件下，當環境絕對壓力為0.02MPa時，“逆轉溫度”的理論值為90左右，試驗值在

5、8085之間。出現偏差的主要原因是由于理論分析時未考慮真空過熱蒸汽的輻射特性。已有的研究表明，在（常壓）過熱蒸汽干燥時存在一個溫度點，稱為“逆轉溫度”，當過熱蒸汽的溫度高于“逆轉溫度”的溫度時，過熱蒸汽干燥速率比空氣要快，低于逆轉溫度時則正好相反。由于木材浮壓干燥的工業化應用是在負壓區實現的，因此對真空狀態下過熱蒸汽干燥是否也存在“逆轉溫度”問題的研究非常重要。如果真空狀態下的“逆轉溫度”確實存在，那么在制定木材浮壓干燥工藝時，就可使干燥介質溫度始終高于“逆轉溫度”，這樣即可實現在保持較快干燥速率的基礎之上，充分發揮過熱蒸汽干燥時木材表面對流換熱系數大、傳質阻力和干燥品質好等一系列的優勢，這對

6、于優化木材浮壓干燥工藝具有重要的理論意義和實用價值。2.首次通過大量的試驗和理論分析較為系統深入地研究了木材浮壓干燥的基本規律。通過對浮壓和常規干燥過程中預熱階段的對比試驗研究表明：木材浮壓干燥預熱階段進行的非常迅速。在絕對壓力為0.02MPa，介質溫度分別為60、80時，以蒸汽為干燥介質時的平均升溫速率分別是以空氣為干燥介質時的1.55、1.64倍。這說明隨著干燥介質溫度的提高，從預熱階段的升溫速率來講，以蒸汽為干燥介質要優于以空氣為干燥介質；同時試驗中還發現以蒸汽為干燥介質時，在預熱階段結束后的木材的含水率比預熱之前的初含水率要大。這主要是因水分凝結所致，由于凝結的水分僅位于木材表面且預熱

7、時間很短，因此對整個干燥過程影響很小。通過試驗及理論分析，探討了試件尺寸（厚度和長度）對浮壓干燥速率的影響規律。試驗表明，在一定尺寸范圍內，浮壓干燥的干燥速率不受試件厚度的影響，但受試件長度的影響。然而，有一點應當特別關注，即縱向水分移動的速率隨試件長度的增加衰減迅速，隨著試件長度的增加木材內水分從側面的移動對干燥速率的貢獻率將逐漸占據主導地位。因此，在浮壓干燥過程中，預見有一個“臨界尺寸”的存在。通過浮壓干燥介質條件對水分移動速率的影響規律的研究表明，木材的浮壓干燥速率隨著干燥介質溫度的增加、絕對壓力的減小和浮動頻率的加大而增加。但在上述三因素中對干燥速率的影響程度各不相同，從大到小的排列順

8、序?yàn)椋航橘|(zhì)溫度（T）壓力浮動頻率（Hz）絕對壓力（P）。3. 首次對浮壓干燥過程中木材的濕遷移特性進行了深入研究，揭示了浮壓下自由水和吸著水遷移的驅動力及其遷移特性，并推導出計算方程。通過對浮壓干燥的干燥速率和干燥過程中木材內部溫、濕度場變化的研究表明，在溫度為80、壓力浮動范圍為0.02在浮壓干燥過程中自由水的移動由兩部分組成，其一是在毛細管壓力下液體的團塊遷移；其二是在壓力梯度下，由于壓力波動而引起自由水的蒸發或沸騰后所產生的水蒸汽的遷移，且后者在自由水的遷移過程中占主導地位。自由水在毛細管中的蒸發或沸騰實質上是復雜的微尺度傳熱傳質過程。由于尺度的微小化，使管道中流動和換熱受管道尺寸、形狀

9、、表面結構等因素的影響很大。在木材為溫度為80，環境絕對壓力為0.02MPa的條件下，理論計算表明此時的汽泡平衡態半徑為4.68m，而針葉樹材管胞的內徑為2030m。由此可見，此狀態下管胞內腔有足夠的空間用于液體內部汽泡的生成。因此當木材中大毛細管水達到沸點以后，在細胞腔中液體內部的強烈汽化是可能發生的。在微尺度傳熱傳質中的“汽化空間”與“擬沸騰”的概念同樣適用于木材，可以設想當液態水處于紋孔口處時，可能就會出現“擬沸騰”狀態。在浮壓干燥過程中，水蒸汽壓力梯度和壓力的浮動是吸著水移動的主要驅動力。FSP以下時水分的擴散移動分成兩個部分。其一是在水蒸汽壓力梯度下的擴散遷移；其二是由于干燥介質壓力

10、的波動而引起的浮動壓力下的遷移。采用擴散杯法對水分?jǐn)U散系數和浮壓系數進行了測定。確定出不同壓力下與常壓(0.1MPa)下水分?jǐn)U散系數的數學表達式，以及不同壓力變化速率下與壓力固定不變時浮壓系數的數學表達式。運用上述方程，再對常壓下含水率和溫度與水分?jǐn)U散系數之間的關系式進行修正后，即可確定出浮壓干燥過程中吸著水遷移量的計算方程。對試驗數據回歸分析表明：木材水分?jǐn)U散系數隨絕對壓力的增加呈線性減?。浑S壓力變化速率的增加呈對數曲線增大。4. 在借鑒常壓下鋸材干燥數學模型的基礎之上，以水蒸汽壓力梯度為水分移動的主要驅動力，首次建立了木材浮壓干燥中熱質傳遞的數學模型。通過對理論模擬與試驗結果的比較分析可知

11、：計算機模擬的曲線和試驗曲線除在高含水率區域有一定偏差外（含水率最大偏差值為8.12%），其余區域均可很好地吻合。特別是從初含水率90%到終含水率12%的平均干燥速率來看，計算機模擬值為2.95%/h，試驗值為3.04%/h，兩者的誤差不超過5%。數學模型組成了一個木材干燥的動態機制，通過實驗證明，模型在較寬的條件范圍內能較為準確預測浮壓干燥下馬尾松的平均含水率。關鍵詞 木材、真空干燥、浮壓、水分移動Characteristics of Heat and Mass Transfer in WoodDrying Process under Floating Pressure（Yi Songlin

12、 Directed by Prof. Zhang Biguang & Prof. Chang Jianming）Abstract Wood drying is generally regarded as the key item in wood processing and utilization, the drying process accounts for approximately 40% to 70% percent of total wood-products manufacturing energy consumption. Therefore proper drying is

13、of importance to improve the quality of forest products and is playing an essential role in using and saving wood reasonably, and its contributions to the improved performance to products and cost reduction have been drawing an even increasing attention. Usually the conventional drying methods take

14、advantage of the temperature of air, relative humidity and air velocity to control drying process with the medium of wet-air, however, the fact that the role of ambient pressure in determining the moisture transfer in wood and its evaporation intensity has been neglected. Wood drying under floating

15、pressure is an innovative technology, which considerably takes the effects of ambient pressure into account. Compared with the traditional drying and vacuum drying methods, its ambient pressure varies to form floating pressure with the drying medium of superheated steam. As a result, the fluctuation

16、 of ambient pressure accelerates the rate of moisture transfer while keeps wood surface wet, which effectively protect the occurrences of drying defects. With the performance of short drying-cycle and good quality, wood drying under floating pressure has been universally recognized as a novel wood d

17、rying method lighted with color future. R&D of the innovative drying processing and technology to improve the quality of products and efficiency, especially in response to solving the conflicts between supplies of wood failure to satisfy the demands of wood, has an important strategic meaning.Althou

18、gh drying under floating pressure has a limited application to industries in Germany, Danish, and France as well as Canada recently, a number of fundamentals with respect to processing are far from satisfying. At present, researches on the theory of wood drying under floating pressure both in domest

19、ic and oversea are few, dont mention the heat and mass transfer of drying under floating pressure. Therefore, carrying out the theoretical and experimental research on drying under floating pressure has an important implication both in theory and practice.This paper is supported by the Natural Scien

20、ce Foundation of China (Grant No. 59876005), its content is closely related to the requirements of practice, aiming at the problem that imported hardwood is difficult to dry and how to dry faster grow-tree wood. Based on the background of drying under floating pressure, experimental program is carri

21、ed out when the ambient is under an atmospheric pressure which is the most useful. This paper began with the characteristics of drying medium, and explored the fundamentals of heat and mass transfer, then a mathematical model based on the heat and mass transfer was established to optimize design and

22、 control the drying process. The research developed an innovative way for wood drying technology with new conception.The conclusions and originalities are:1. based on the characteristics of drying medium, theoretical analysis concerning the existence of inversion temperature between the condition of

23、 superheated steam under vacuum-drying and air drying has been carried out, developed the theoretical model of inversion temperature of superheated steam under vacuum, and for the first time it has been proven to be true that the inversion temperature really exist under the condition of vacuum throu

24、gh comparable experience of air and superheat steam. If we consider that there is only convection, when the absolute pressure of ambient is 0.02Mpa, the theoretical value of inversion temperature is approximate to 90, and the experimental value, however, is 8085. The reason for this difference is th

25、at we neglected the effect of radiation.The previous literatures indicate the inversion temperature exists under superheated steam drying with an atmospheric pressure, when the temperature of superheated steam is higher than the point of inversion temperature, the drying rate of superheated steam is

26、 faster than that of air drying, but if the temperature of superheated steam is lower than the point of inversion temperature, the drying rate of superheated steam is slower than that of air drying. Owing to the fact that the floating pressure drying in industries is operated under vacuum, so it is

27、of importance to reveal whether the inversion temperature of superheated steam drying exists or not under vacuum is important, if it does, we can make the temperature of drying medium is always higher than the inversion temperature, thus we can make full use of these credits of superheated steam dry

28、ing such as the bigger convection heat coefficient, lower resistance to mass transfer and good quality, finally to optimize wood drying processing under floating pressure.2. For the first time a number of experiences and theoretical analysis have been carried out to explore the fundamentals of wood

29、drying under floating pressure.l The comparable experiments from the preheating process of floating pressure drying and conventional drying indicated that heat transfer increases sharply. When the absolute pressure is 0.02Mpa, the temperatures of drying mediums are 60 and 80 respectively, the averag

30、e rates of rising temperature with the drying medium of superheated steam is 1.55 and 1.64 times than that of using air for drying medium. The ration of the rate of wood average temperature increment with the drying medium of superheated steam to that of air illustrates that coupled with the drying

31、medium temperature rising, the rising rate of temperature of superheated is superior to that of air during the stage of preheating; meanwhile the moisture content of wood treated with superheated steam is higher that of its initial moisture content, which caused by the condensation of water. Thus th

32、is phenomenon is favorable in the whole drying process.l The effects of sample size including thickness and length on the drying rate under floating pressure have been analyzed through experiments and theoretical analysis. The results showed sample thickness within a certain range makes no differenc

33、e on the drying rate, but the length do. The fact illustrates that moisture transfer mainly along longitudinal direction. However, one thing need to mention is the rate of moisture movement along longitudinal direction reduces sharply with the increasing of length; simultaneously moisture movement a

34、long lateral direction will be dominant in contribution to the drying rate. Therefore, we can draw a conclusion that a critical sample size exists.l Results from analyzing the effects of drying medium under floating pressure on moisture movements rate show: the drying rate of floating pressure dryin

35、g increases with the increasing of drying medium temperature; the reducing of absolute pressure and the increasing of fluctuating frequency. Their contributions to the drying rate list as followings sequence: the first is temperature, followed by fluctuating pressure frequency, and the last is absol

36、ute pressure.3. The driving force and the characteristics of free water and absorbed water movements under floating pressure have been revealed for the first time, and their mathematic equations have also been established.l Through the research of both the drying rate and the changes of temperature

37、plateau and moisture plateau under floating pressure, results demonstrate that when the temperature of drying medium is 80, the fluctuating frequency are 0.75 times per hour and 0.375 time per hour respectively, the drying rates of wood drying under floating pressure are 3.24 times and 2.69 time tha

38、n that of air drying, the fact show that the range of pressure fluctuation and its frequency play important roles in determining the drying rate. When the temperature is fixed, the expanding range of fluctuating pressure and faster fluctuation frequency increases the change of temperature and moistu

39、re plateau, as a result, the time required is shortened. However the surface moisture content is approximate to the core moisture content, that is to say moisture content is not the dominant force under floating pressure.l The movement of free water comprises two parts during the process of drying u

40、nder floating pressure, one is the mass transfer driven by capillary pressure, and the other is steam transfer due to the evaporation and boiling of free water caused by the pressure fluctuation under pressure gradient. Furthermore, the later dominates the removing of free water.Essentially the evap

41、oration or boiling of free water in capillary can be regarded as the heat and mass transfer with micro-dimension. the minimization of dimension make the heat and mass transfer affected by the flow, size of pipeline, and its shape as well as surface structure more easily. When the temperature of wood

42、 is 80, the absolute pressure of ambient is 0.02Mpa, the equilibrium radius of bubble calculated theoretically is 4.68m, however, the tracheid of softwood internal diameter is 2030m，obviously there is sufficient space to form bubble in liquid. When the water in bigger capillary reaches its boiling p

43、oint, it is possible that the intensive evaporation in cell cavity occurs. The conception of vapor space and boiling can be also used in wood drying. We can image that boiling will begin when the liquid water lies in the entrance to pits. l The moisture diffusion below fiber saturation point can be divided into two parts: the transfers caused by steam gradient and the pressure fluctuation respectively.l Measuring respectively the moisture diffusion coefficient and floating pressure coefficient by the means of diffusible cup under various press