DS18B20溫度傳感器實驗Word版

1、DS18B20溫度傳感器實驗Proteus仿真原理圖：DS18B20內(nèi)部結(jié)構(gòu)：- 2 - / 10/* 源程序 */#include <reg51.h>#include <intrins.h>#define uint unsigned int#define uchar unsigned char#define delayNOP() _nop_();_nop_();_nop_();_nop_();sbit DQ = P33;sbit LCD_RS = P20;sbit LCD_RW = P21;sbit LCD_EN = P22;uchar code Temp_Disp_

2、Title="Current Temp : "uchar Current_Temp_Display_Buffer=" TEMP: "uchar code Temperature_Char8 = 0x0c,0x12,0x12,0x0c,0x00,0x00,0x00,0x00;uchar code df_Table= 0,1,1,2,3,3,4,4,5,6,6,7,8,8,9,9;uchar CurrentT = 0;uchar Temp_Value=0x00,0x00;uchar Display_Digit=0,0,0,0;bit DS18B20_IS_O

3、K = 1;void DelayXus(uint x) uchar i;while(x-) for(i=0;i<200;i+);bit LCD_Busy_Check() bit result;LCD_RS = 0;LCD_RW = 1;LCD_EN = 1;delayNOP();result = (bit)(P0&0x80);LCD_EN=0;return result;void Write_LCD_Command(uchar cmd)while(LCD_Busy_Check();LCD_RS = 0;LCD_RW = 0;LCD_EN = 0;_nop_();_nop_();P

4、0 = cmd;delayNOP();LCD_EN = 1;delayNOP();LCD_EN = 0;void Write_LCD_Data(uchar dat)while(LCD_Busy_Check();LCD_RS = 1;LCD_RW = 0;LCD_EN = 0;P0 = dat;delayNOP();LCD_EN = 1;delayNOP();LCD_EN = 0;void LCD_Initialise() Write_LCD_Command(0x01);DelayXus(5);Write_LCD_Command(0x38);DelayXus(5);Write_LCD_Comma

5、nd(0x0c);DelayXus(5);Write_LCD_Command(0x06);DelayXus(5);void Set_LCD_POS(uchar pos) Write_LCD_Command(pos|0x80);void Delay(uint x) while(-x);uchar Init_DS18B20() uchar status;DQ = 1;Delay(8);DQ = 0;Delay(90);DQ = 1;Delay(8);DQ = 1;return status;uchar ReadOneByte() uchar i,dat=0;DQ = 1;_nop_();for(i

6、=0;i<8;i+) DQ = 0;dat >>= 1;DQ = 1;_nop_();_nop_();if(DQ)dat |= 0X80;Delay(30);DQ = 1;return dat;void WriteOneByte(uchar dat) uchar i;for(i=0;i<8;i+) DQ = 0;DQ = dat& 0x01;Delay(5);DQ = 1;dat >>= 1;void Read_Temperature() if(Init_DS18B20()=1)DS18B20_IS_OK=0;elseWriteOneByte(0xc

7、c);WriteOneByte(0x44);Init_DS18B20();WriteOneByte(0xcc);WriteOneByte(0xbe);Temp_Value0 = ReadOneByte(); Temp_Value1 = ReadOneByte();DS18B20_IS_OK=1;void Display_Temperature() uchar i;uchar t = 150, ng = 0;if(Temp_Value1&0xf8)=0xf8) Temp_Value1 = Temp_Value1;Temp_Value0 = Temp_Value0+1;if(Temp_Va

8、lue0=0x00)Temp_Value1+;ng = 1;Display_Digit0 = df_TableTemp_Value0&0x0f;CurrentT = (Temp_Value0&0xf0)>>4) | (Temp_Value1&0x07)<<4);Display_Digit3 = CurrentT/100;Display_Digit2 = CurrentT%100/10;Display_Digit1 = CurrentT%10;Current_Temp_Display_Buffer11 = Display_Digit0 + '

9、;0'Current_Temp_Display_Buffer10 = '.'Current_Temp_Display_Buffer9 = Display_Digit1 + '0'Current_Temp_Display_Buffer8 = Display_Digit2 + '0'Current_Temp_Display_Buffer7 = Display_Digit3 + '0'if(Display_Digit3 = 0)Current_Temp_Display_Buffer7 = ' 'if(Displa

10、y_Digit2 = 0&&Display_Digit3=0)Current_Temp_Display_Buffer8 = ' 'if(ng) if(Current_Temp_Display_Buffer8 = ' ')Current_Temp_Display_Buffer8 = '-'else if(Current_Temp_Display_Buffer7 = ' ')Current_Temp_Display_Buffer7 = '-'else Current_Temp_Display_Buffer6 = '-'Set_LCD_POS(0x00);for(i=0;i<16;i+)Write_LCD_Data(Temp_Disp_Titlei); Set_LCD_POS(0x40);for(i=0;i<16;i+)Write_LCD_Data(Current_Temp_Display_Bufferi); Set_LCD_POS(0x4d);Write_LCD_Data(0x00);Set_LCD_POS(0x4e);Write_LCD_Data('C');void main() LCD_Initialise();Read_Tem