QCT 2591998標準(英文版)_第1頁
QCT 2591998標準(英文版)_第2頁
QCT 2591998標準(英文版)_第3頁
全文預覽已結束

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、qc/t 259-1998 prefacethis standard adopts the japan standard of jaso c614 87 as a major reference.the standard is presented by mechanical industry bureau of china.the standard is under the jurisdiction of auto standardization technical committee of china.the standard is drafted by shiyan wheel and r

2、im research institute.the major draftsman: yu chuanming auto industry standard of the p.r.c qc/t 259-1998requirements and test methods on the welding intensity of the wheel rims/wheel spokes1 scopethis standard stipulated the requirement and test methods on the welding intensity of the wheel rims/wh

3、eel spokesthis standard applies to the steel wheels using 5 dc wheel rims.2 test samplestest samples should finish all processing procedures, except coating.3 intensity requirementsunder the test load, no tear or visible cracks should occur on the welding position of the rims or spokes.4 test equipm

4、entthe test equipment is showed as the following diagram: lower tooling spoke upper tooling rimloadtest equipment should meet with the following:1) the clearance between the interior side of the spoke and the upper tooling is 23mm;2) the clearance between the outside of the spoke and the lower tooli

5、ng is 23mm;3) the upper tooling and the spokes, the lower tooling and the rims should closely matched with each other 4) load machine is hydraulic.mechanical industry bureau approved 1998-12-16 implemented july, 1st, 1999qc/t 259 -19985 test methodsas exhibited in the diagram above, the side surface

6、 of the rims should closely contact the lower tooling, and the load is on the interior side of the spokes, and the welding positions of the rims/spokes should be loaded evenly.the load should be slowly increment to the specified value as showed in the following table.6 test loadtest load as per the following table:

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論