角鋼鋼材檢測報告(共23頁)

1、精選優質文檔-傾情為你奉上鋼材檢測報告Steel Test Report樣品名稱 角鋼 建設單位 無錫明闐通用設備制造有限公司 報告編號 B831a Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Report number: B831a 委托單位 無錫明闐通用設備制造有限公司 施工單位 - 檢測類別 委托檢測 Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Const

2、ruction unit: Test category: Entrusted Test工程名稱 JMR2x60t/h燃煤鍋爐工程 監理單位 - 樣品狀態 可檢 Project name : JMR2x60t/h coal-fired boiler project Supervision unit: Sample status: Detectable 檢測依據 GB/T706-2008熱軋型鋼 檢測環境 20OC 檢測日期 2012-11-28 Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20

3、OC Inspection date: November 28, 2012表1 化學成分Table1. Chemical composition牌號Marks化 學 成 分 %Chemical compositions %CMnSiPS檢測結論 Test conclusionQ235B0.160.480.290.0400.025該樣品經檢驗，按GB/T706-2008標準評定：化學成分分析合格After the sample inspection, the analysis of chemical composition is acceptable in accordance with GB/

4、T706-2008 Standard.牌號Marks規格Specification（mm）計算重量（t）拉伸彎曲試驗Bending Test（180O）代表數量 （t）生產廠家M質保書編號Warranty number結構部位 檢測結論Test conclusion屈服點s s（MPa）抗拉強度bTensile Strengthb（MPa）伸長率5Elongation5（%）Q235BL50×502.52704203227.52.5馬鞍山鋼鐵股份有限公司Maanshan Iron & Steel Co., LtdZ煙風道Flue and air duct該樣品經檢驗，按GB/

5、T706-2008標準評定：機械性能合格After the sample inspection, mechanical properties are acceptable in accordance with GB/T706-2008 Standard.表2 機械性能 Table 2. Mechanical properties檢測報告說明：1.若對報告有異議，應于收到報告之日期起十五日內，以書面形式向檢測單位提出，逾期視為對報告無異議。 2.送樣檢測，檢測結果僅對來樣負責。 3.報告及其復印件未加蓋本單位檢測報告專用章，報告無效。Notes for test report: 1. In ca

6、se of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the objections shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived. 2. For entrusted tests, the test results presented in this report

7、 relate only to the samples delivered. 3. This report and the copies of it are not valid unless stamped by the inspection unit. 檢測單位：無錫市建筑工程質量檢測中心 Test unit: Wuxi Inspection Center for Construction Quality負責人： 審核人： 試驗人： 單位地址：江蘇省無錫市新區新輝環路8號 Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu

8、Director Reviewer: Tester: 報告日期： 2012-11-28 Report date: November 28, 2012上崗證號： B0035 B0322 B0377 電 話： 0510-，傳真：0510- Telephone: 0510- Fax No.：0510-Certificate No. B0035 B0322 B0377 郵 編： Zip Code: 鋼材檢測報告Steel Test Report樣品名稱 角鋼 建設單位 無錫明闐通用設備制造有限公司 報告編號 B832a Sample name: Angle steel Construction uni

9、t: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Report number: B832a 委托單位 無錫明闐通用設備制造有限公司 施工單位 - 檢測類別 委托檢測 Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test工程名稱 JMR2x60t/h燃煤鍋爐工程 監理單位 - 樣品狀態 可檢 Project name : JMR2x60t/h coal-fired

10、 boiler project Supervision unit: Sample status: Detectable 檢測依據 GB/T706-2008熱軋型鋼 檢測環境 20OC 檢測日期 2012-11-28 Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20OC Inspection date: November 28, 2012表1 化學成分Table1. Chemical composition牌號Marks化 學 成 分 %Chemical compositions %CMnSi

11、PS檢測結論Test conclusionQ235B0.130.550.230.0300.020該樣品經檢驗，按GB/T706-2008標準評定：化學成分分析合格After the sample inspection, the analysis of chemical composition is acceptable in accordance with GB/T706-2008 Standard.牌號Marks規格Specification（mm）計算重量（t）拉伸彎曲試驗Bending Test（180O）代表數量 （t）生產廠家M質保書編號Warranty number結構部位 檢測結

12、論Test conclusion屈服點s s（MPa）抗拉強度bTensile Strengthb（MPa）伸長率5Elongation5（%）Q235BL80×83.22854352927.52.5馬鞍山鋼鐵股份有限公司Maanshan Iron & Steel Co., Ltd煤斗Coal hopper該樣品經檢驗，按GB/T706-2008標準評定：機械性能合格After the sample inspection, mechanical properties are acceptable in accordance with GB/T706-2008 Standard

13、.表2 機械性能 Table 2. Mechanical properties檢測報告說明：1.若對報告有異議，應于收到報告之日期起十五日內，以書面形式向檢測單位提出，逾期視為對報告無異議。 2.送樣檢測，檢測結果僅對來樣負責。 3.報告及其復印件未加蓋本單位檢測報告專用章，報告無效。Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the objecti

14、ons shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived. 2. For entrusted tests, the test results presented in this report relate only to the samples delivered. 3. This report and the copies of it are not valid unless stamped by the inspection unit

15、. 檢測單位：無錫市建筑工程質量檢測中心 Test unit: Wuxi Inspection Center for Construction Quality負責人： 審核人： 試驗人： 單位地址：江蘇省無錫市新區新輝環路8號 Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 報告日期： 2012-11-28 Report date: November 28, 2012上崗證號： B0035 B0322 B0377 電 話： 0510-，傳真：0510- Telephon

16、e: 0510- Fax No.：0510-Certificate No. B0035 B0322 B0377 郵 編： Zip Code: 鋼材檢測報告Steel Test Report樣品名稱 角鋼 建設單位 無錫明闐通用設備制造有限公司 報告編號 B833a Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Report number: B833a 委托單位 無錫明闐通用設備制造有限公司 施工單位 - 檢測類別 委托檢測 Client: Wu

17、xi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test工程名稱 JMR2x60t/h燃煤鍋爐工程 監理單位 - 樣品狀態 可檢 Project name : JMR2x60t/h coal-fired boiler project Supervision unit: Sample status: Detectable 檢測依據 GB/T706-2008熱軋型鋼 檢測環境 20OC 檢測日期 2012-11-28 Test Standard: GB/

18、T706-2008 hot-rolled steel section Testing environment: 20OC Inspection date: November 28, 2012表1 化學成分Table1. Chemical composition牌號Marks化 學 成 分 %Chemical compositions %CMnSiPS檢測結論Test conclusionQ235B0.190.500.290.0400.028該樣品經檢驗，按GB/T706-2008標準評定：化學成分分析合格After the sample inspection, the analysis of

19、chemical composition is acceptable in accordance with GB/T706-2008 Standard.牌號Marks規格Specification（mm）計算重量（t）拉伸彎曲試驗Bending Test（180O）代表數量 （t）生產廠家M質保書編號Warranty number結構部位 檢測結論Test conclusion屈服點s s（MPa）抗拉強度bTensile Strengthb（MPa）伸長率5Elongation5（%）Q235BL63×61.82553702727.51.8馬鞍山鋼鐵股份有限公司Maanshan I

20、ron & Steel Co., LtdZ灰?guī)煸鼛霢sh and slag silo該樣品經檢驗，按GB/T706-2008標準評定：機械性能合格After the sample inspection, mechanical properties are acceptable in accordance with GB/T706-2008 Standard.表2 機械性能 Table 2. Mechanical properties檢測報告說明：1.若對報告有異議，應于收到報告之日期起十五日內，以書面形式向檢測單位提出，逾期視為對報告無異議。 2.送樣檢測，檢測結果僅對來樣負責。 3.

21、報告及其復印件未加蓋本單位檢測報告專用章，報告無效。Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the objections shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived. 2. For e

22、ntrusted tests, the test results presented in this report relate only to the samples delivered. 3. This report and the copies of it are not valid unless stamped by the inspection unit. 檢測單位：無錫市建筑工程質量檢測中心 Test unit: Wuxi Inspection Center for Construction Quality負責人： 審核人： 試驗人： 單位地址：江蘇省無錫市新區新輝環路8號 Add

23、ress: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 報告日期： 2012-11-28 Report date: November 28, 2012上崗證號： B0035 B0322 B0377 電 話： 0510-，傳真：0510- Telephone: 0510- Fax No.：0510-Certificate No. B0035 B0322 B0377 郵 編： Zip Code: 鋼材檢測報告Steel Test Report樣品名稱 角鋼 建設單位 無錫明闐通用設備制造

24、有限公司 報告編號 B834a Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Report number: B834a 委托單位 無錫明闐通用設備制造有限公司 施工單位 - 檢測類別 委托檢測 Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test工程名稱 JMR2x60t/h燃

25、煤鍋爐工程 監理單位 - 樣品狀態 可檢 Project name : JMR2x60t/h coal-fired boiler project Supervision unit: Sample status: Detectable 檢測依據 GB/T706-2008熱軋型鋼 檢測環境 20OC 檢測日期 2012-11-28 Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20OC Inspection date: November 28, 2012表1 化學成分Table1. Chemica

26、l composition牌號Marks化 學 成 分 %Chemical compositions %CMnSiPS檢測結論Test conclusionQ235B0.170.430.210.0400.038該樣品經檢驗，按GB/T706-2008標準評定：化學成分分析合格After the sample inspection, the analysis of chemical composition is acceptable in accordance with GB/T706-2008 Standard.牌號Marks規格Specification（mm）計算重量（t）拉伸彎曲試驗Be

27、nding Test（180O）代表數量 （t）生產廠家M質保書編號Warranty number結構部位 檢測結論Test conclusion屈服點s s（MPa）抗拉強度bTensile Strengthb（MPa）伸長率5Elongation5（%）Q235B10a36a3.531044531303.5馬鞍山鋼鐵股份有限公司Maanshan Iron & Steel Co., LtdZ灰?guī)煸鼛霢sh and slag silo該樣品經檢驗，按GB/T706-2008標準評定：機械性能合格After the sample inspection, mechanical proper

28、ties are acceptable in accordance with GB/T706-2008 Standard.表2 機械性能 Table 2. Mechanical properties檢測報告說明：1.若對報告有異議，應于收到報告之日期起十五日內，以書面形式向檢測單位提出，逾期視為對報告無異議。 2.送樣檢測，檢測結果僅對來樣負責。 3.報告及其復印件未加蓋本單位檢測報告專用章，報告無效。Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days

29、after the receipt of the test report, meanwhile, the objections shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived. 2. For entrusted tests, the test results presented in this report relate only to the samples delivered. 3. This report and the copi

30、es of it are not valid unless stamped by the inspection unit. 檢測單位：無錫市建筑工程質量檢測中心 Test unit: Wuxi Inspection Center for Construction Quality負責人： 審核人： 試驗人： 單位地址：江蘇省無錫市新區新輝環路8號 Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 報告日期： 2012-11-28 Report date: November

31、28, 2012上崗證號： B0035 B0322 B0377 電 話： 0510-，傳真：0510- Telephone: 0510- Fax No.：0510-Certificate No. B0035 B0322 B0377 郵 編： Zip Code: 鋼材檢測報告Steel Test Report樣品名稱 角鋼 建設單位 無錫明闐通用設備制造有限公司 報告編號 B835a Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Report n

32、umber: B835a 委托單位 無錫明闐通用設備制造有限公司 施工單位 - 檢測類別 委托檢測 Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test工程名稱 JMR2x60t/h燃煤鍋爐工程 監理單位 - 樣品狀態 可檢 Project name : JMR2x60t/h coal-fired boiler project Supervision unit: Sample status: Detectable 檢測依據 G

33、B/T706-2008熱軋型鋼 檢測環境 20OC 檢測日期 2012-11-28 Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20OC Inspection date: November 28, 2012表1 化學成分Table1. Chemical composition牌號Marks化 學 成 分 %Chemical compositions %CMnSiPS檢測結論Test conclusionQ235B0.190.400.180.0250.020該樣品經檢驗，按GB/T706-20

34、08標準評定：化學成分分析合格After the sample inspection, the analysis of chemical composition is acceptable in accordance with GB/T706-2008 Standard.牌號Marks規格Specification（mm）計算重量（t）拉伸彎曲試驗Bending Test（180O）代表數量 （t）生產廠家M質保書編號Warranty number結構部位 檢測結論Test conclusion屈服點s s（MPa）抗拉強度bTensile Strengthb（MPa）伸長率5Elongati

35、on5（%）Q235B3.75×15104.75×15107.75×15109.75×15101.230541034271.2日照鋼鐵股份有限公司Rizhao Iron & Steel Co., Ltd煙風道Flue and air duct灰?guī)煸鼛霢sh and slag silo該樣品經檢驗，按GB/T706-2008標準評定：機械性能合格After the sample inspection, mechanical properties are acceptable in accordance with GB/T706-2008 Stand

36、ard.表2 機械性能 Table 2. Mechanical properties檢測報告說明：1.若對報告有異議，應于收到報告之日期起十五日內，以書面形式向檢測單位提出，逾期視為對報告無異議。 2.送樣檢測，檢測結果僅對來樣負責。 3.報告及其復印件未加蓋本單位檢測報告專用章，報告無效。Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the obje

37、ctions shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived. 2. For entrusted tests, the test results presented in this report relate only to the samples delivered. 3. This report and the copies of it are not valid unless stamped by the inspection unit. 檢測單位：無錫市建筑工程質量檢測中心 Test unit: Wuxi Inspection Center for Construction Quality負責人： 審核人： 試驗人： 單位地址：江蘇省無錫市新區新輝環路8號 Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 報告日期： 2012-11-28 Report date: November