《比例閥基本原理》PPT課件.ppt

1、,PROPORTIONAL VALVES - BASIC PRINCIPLES,Copyright Eaton Hydraulics 2000,Steve Skinner, Eaton Hydraulics, Havant, UK,比例閥基本原理,BASIC SYSTEM,1) 一般認為一個簡單的液壓系統由油箱（A）、電動機（B）、泵（C）、溢流閥（D）、過濾器（E）、流量控制閥（F）、方向控制閥（G）、和油缸（H）組成。,2) 油缸的運動是由流量控制閥（確定運動的速度）和方向控制閥（油缸運動的方向）控制。,A,B,C,D,E,F,H,G,BASIC SYSTEM,當電磁閥得電時，油缸活塞將伸

2、出和回縮,其速度由流量控制閥確定，而電磁閥不具有控制速度的能力。,BASIC SYSTEM,A three position solenoid valve can: - extend the cylinder,BASIC SYSTEM,A three position solenoid valve can: - extend the cylinder - retract the cylinder,BASIC SYSTEM,A three position solenoid valve can: - extend the cylinder - retract the cylinder - sto

3、p the cylinder,因此電磁閥的動作非常象一個電路中的開關 在此位置燈是關閉狀態.,. 在另外一個位置是開啟狀態，而沒有中間狀態。 and in the other position it is switched on but there are no intermediate states.,然而眾所周知，另一種形式的開關能夠用來控制燈泡，調光開關 However, another type of switch can be used for controlling a light bulb known as a dimmer switch.,在這個例子中，這個開關能夠被轉到全開和

4、全關的任一位置，來調整燈泡的亮度 In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.,In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.,In this case, the switch can be turned

5、to any position between fully off and fully on to vary the brightness of the bulb.,In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.,In this case, the switch can be turned to any position between fully off and fully on to vary t

6、he brightness of the bulb.,In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.,在這個例子中，這個開關能夠被轉到全開和全關的任一位置，來調整燈泡的亮度。 In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of th

7、e bulb.,In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.,BASIC SYSTEM,2) 閥芯能夠移動到在任一位置，而不僅僅是三個不連續的位置。 閥芯在離開中位的方向仍然確定油缸運動的方向，但閥芯離開中位的距離控制活塞的速度。,1) 比例方向閥能夠被看作與調光開關具有同樣功能。 A proportional directional valve can be thought of as the d

8、immer switch equivalent of an electrical switch.,BASIC SYSTEM,于是在實際上比例閥可以同時作為方向閥和流量閥來使用。 So in effect the proportional directional valve is acting as both a directional valve and a flow control valve.,SWITCHING SOLENOID VALVE,一個傳統的電磁閥能夠被認為是一個簡單的開關閥。 A conventional solenoid valve can be thought of as

9、 a simple switching valve. 它可以被一些只有簡單電流通斷的開關的電設備來控制 It is controlled by some form of electrical device which simply switches the electrical current on or off.,SWITCHING SOLENOID VALVE,A conventional solenoid valve can be thought of as a simple switching valve. It is controlled by some form of electr

10、ical device which simply switches the electrical current on or off.,SWITCHING SOLENOID VALVE,A conventional solenoid valve can be thought of as a simple switching valve. It is controlled by some form of electrical device which simply switches the electrical current on or off.,PROPORTIONAL VALVE,一個比例

11、方向閥是由與一個與調光開關非常象的電設備控制的。 A proportional directional valve however will be controlled by an electrical device more like a dimmer switch.,PROPORTIONAL VALVE,通過改變兩個之一電磁鐵的電流，閥芯移動的位移能夠被改變，因此控制了通過閥的流量。 By varying the current to either solenoid, the amount of spool movement can be varied and hence the amou

12、nt of flow through the valve can be controlled.,PROPORTIONAL VALVE,By varying the current to either solenoid, the amount of spool movement can be varied and hence the amount of flow through the valve can be controlled.,PROPORTIONAL VALVE,By varying the current to either solenoid, the amount of spool

13、 movement can be varied and hence the amount of flow through the valve can be controlled.,PROPORTIONAL VALVE,By varying the current to either solenoid, the amount of spool movement can be varied and hence the amount of flow through the valve can be controlled.,PROPORTIONAL VALVE,By varying the curre

14、nt to either solenoid, the amount of spool movement can be varied and hence the amount of flow through the valve can be controlled.,PROPORTIONAL VALVE,By varying the current to either solenoid, the amount of spool movement can be varied and hence the amount of flow through the valve can be controlle

15、d.,PROPORTIONAL SOLENOID,因此不像傳統的電磁閥，通過比例閥線圈的電流需要被調整，而不僅僅是開關式的通斷。 比例閥電磁鐵的結構與開關式電磁鐵是相似的。 電磁鐵包括: - 線圈 (A) - 框架 (B) - 電樞 (C) - 電極片 (D) - 頂針 (E) 電樞被 包在一個芯軸管（F）中。 (同時全部的總成經常被壓進一個樹脂塑料的外罩（G）中）,A,B,C,D,F,G,E,PROPORTIONAL SOLENOID,When a voltage is applied to the coil connections, an electrical current will f

16、low through the coil.,PROPORTIONAL SOLENOID,1) 接下來，電流生成一個磁場，磁場主要集中在金屬框架、電機片和電樞中 In turn, the electrical current creates a magnetic field which is concentrated in the metal frame, pole piece and armature.,2) 然而在磁回路的電機片和電樞之間有一個間隙，于是產生一個力，其作用是關閉這個間隙以完成這個磁回路。 There is however a gap in the magnetic circu

17、it between the pole piece and armature so a force is created which acts to close this gap and complete the magnetic circuit.,PROPORTIONAL SOLENOID,1)頂針連接著電磁鐵和閥芯，通常移動閥芯壓縮彈簧。 The push-pin connects the solenoid to the valve spool and normally moves the spool against a spring.,2) 電磁鐵產生的力The 大小由磁場強度決定，磁場

18、強度與通過線圈的電流成比例 force created by the solenoid is determined by the strength of the magnetic field which itself is proportional to the current flowing through the coil.,PROPORTIONAL SOLENOID,增大線圈電流將加大電磁的力，因此推動閥芯壓縮彈簧產生一個更大的位移。 Increasing the coil current will increase the solenoid force and hence move t

19、he spool a greater amount against the spring.,PROPORTIONAL SOLENOID,Increasing the coil current will increase the solenoid force and hence move the spool a greater amount against the spring.,PROPORTIONAL SOLENOID,Increasing the coil current will increase the solenoid force and hence move the spool a

20、 greater amount against the spring.,PROPORTIONAL SOLENOID,電磁鐵被設計成電磁力(F)與線圈電流(I)成線性比例關系。這意味著電磁力僅與線圈電流有關。,開關電磁閥閥芯,比例閥與開關電磁閥之間的另一個區別是閥芯的設計。 A further difference between a switching solenoid valve and a proportional valve is in the design of the spool.,SWITCHING SOLENOID SPOOL,1) 對于開關閥，閥芯被設計為當閥得電時，將壓降最小

21、化。,2)這意味著，控制小流量 閥開口要求非常小并且很困難。 Which would mean that to control low flow rates, the amount of spool opening required would be very small and difficult to control.,S,S,Q,PROPORTIONAL SPOOL,1) 比例閥閥芯具有比較寬的邊緣帶有槽口的臺肩。 A proportional valve spool therefore has wider lands with notches cut into the edges.,S

22、,S,Q,PROPORTIONAL SPOOL,2) 因此盡管通過閥的最大流量被減少了（與開關閥對照）但小流量特別容易控制，閥的開口更有規則。 So although the maximum flow through the valve may be reduced (compared to a switching valve) low flows in particular are more easily controlled and the opening of the valve is more gradual.,1) 比例閥閥芯具有比較寬的邊緣帶有槽口的臺肩。,S,S,Q,PROPOR

23、TIONAL SPOOL,依據控制的最大流量，不同的閥芯能被適用于不同形狀、大小或閥芯槽口的大小特定的閥 Depending upon the maximum flow to be controlled, different spools can be fitted to a particular valve which have different shape, size or number of spool notches.,直動式比例溢流閥,1)比例閥也可以被用來控制壓力。在此比例電磁鐵被用來推動一個錐閥芯通過一個彈簧壓縮閥座。電磁力越大，推開錐閥芯離開閥座打開閥的壓力要求越大。 Pro

24、portional valves can also be used to control pressure. In this case a proportional solenoid is used to push a poppet against a seat via a spring. The greater the solenoid force the greater the pressure required to push the poppet off its seat and open the valve.,DIRECT ACTING PROPORTIONAL RELIEF VAL

25、VE,2) 這里提供一個直動式溢流閥功能，但象多數此類閥一樣，只能允許一個小流量通過該閥。 This provides a direct acting relief valve function but like most such valves, it is only possible to pass small flow rates through the valve.,1)比例閥也可以被用來控制壓力。在此比例電磁鐵被用來推動一個錐閥芯通過一個彈簧壓縮閥座。電磁力越大，推開錐閥芯離開閥座打開閥的壓力要求越大。 Proportional valves can also be used to

26、control pressure. In this case a proportional solenoid is used to push a poppet against a seat via a spring. The greater the solenoid force the greater the pressure required to push the poppet off its seat and open the valve.,兩-級比例溢流閥,為控制大流量，直動式比例溢流閥能被用來作為一個兩級溢流閥（或減壓閥）的先導級 To control higher flow rat

27、es, the proportional direct acting relief valve can be used as the pilot stage of a two-stage relief (or reducing valve).,TWO-STAGE PROPORTIONAL RELIEF VALVE,To control higher flow rates, the proportional direct acting relief valve can be used as the pilot stage of a two-stage relief (or reducing va

28、lve).,BENEFITS OF PROPORTIONAL SYSTEMS,比例系統的優點,遠程控制 傳統系統,在常規系統中為了調整執行器的速度，流量控制閥必須安裝在一個方便的或便于接近的位置，這意味著與操縱臺連接的液壓管路經常運行在高壓下。,遠程控制 比例系統,對于比例系統，控制閥為電子調節，僅需要低功率的電纜連接操縱臺和比例閥即可。 With a proportional system however, where control valve adjustment is electronic, only low-power electrical cables need to be con

29、nected between the operators desk and the valve.,PLC 遠程控制 比例系統,今天更多的是，機械控制被數字電子控制所取代，這里情況也是一樣，比例閥的電子控制能力為液壓系統和電子控制器之間提供一個簡單的接口。,比例壓力控制,使用比例方向和壓力控制閥意味著機器的所有液壓功能（運動和力）能被電子地控制。,電磁閥的反應時間 SOLENOID VALVE RESPONSE TIME,A further benefit of proportional valves is the ability to electronically control the sp

30、eed of operation of the valve. 比例閥地進一步功能是電子控制閥操作速度的能力。,0.015,S,SOLENOID VALVE RESPONSE TIME,Depending upon its size and voltage supply, a conventional switching solenoid valve will have an energisation response time of approximately 15 milli-seconds. 依據閥的大小和提供的電壓，一個傳統的開關電磁閥對于一個得電動作的反應時間是15毫秒。,0.040,

31、S,SOLENOID VALVE RESPONSE TIME,The de-energisation response time will be only slightly slower (typically around 25 ms) since the return spring produces less force than the solenoid . 由于回程彈簧的力小于電磁鐵，斷電的反應時間稍慢（通常25ms左右），,S,比例閥的反應時間 PROPORTIONAL VALVE RESPONSE TIME,比例閥閥芯的運動速度能被閥電磁鐵的供給電子信號確定。通過逐漸地增加或降低信號

32、（叫做斜坡）可以完成幾秒的得電和斷電時間。 The speed ofmovement of a proportional valve spool however can be determined by the electronic signal fed to the valve solenoid. By gradually increasing or decreasing the the signal (known as ramping), it is possible to achieve energisation and de-energisation response times of

33、 several seconds.,1.000,S,PROPORTIONAL VALVE RESPONSE TIME,比例閥閥芯的運動速度能被閥電磁鐵的供給電子信號確定。通過逐漸地增加或降低信號（叫做斜坡）可以完成幾秒的得電和斷電時間。,2.000,S,PROPORTIONAL VALVE RESPONSE TIME,比例閥閥芯的運動速度能被閥電磁鐵的供給電子信號確定。通過逐漸地增加或降低信號（叫做斜坡）可以完成幾秒的得電和斷電時間。,3.000,S,PROPORTIONAL VALVE RESPONSE TIME,比例閥閥芯的運動速度能被閥電磁鐵的供給電子信號確定。通過逐漸地增加或降低信號（

34、叫做斜坡）可以完成幾秒的得電和斷電時間。,頂升舉例-傳統系統 LIFT EXAMPLE - CONVENTIONAL SYSTEM,為什么控制閥的閥芯運動速度是用用處的原因是減少系統中的震動，這可以通過控制執行器的加速和減速來完成。假設舉例，一個簡單的液壓系統被用于賓館中的乘客電梯操作，比較容易說明。,頂升舉例-傳統系統 LIFT EXAMPLE - CONVENTIONAL SYSTEM,.當這磁閥得電降低電梯時，閥芯將快速運動，這意味著油缸將極快地加速到其最大速度（最大速度由控制閥F的設置確定），這個突然的啟動會給電梯乘客一個極不舒服的感受。,F,頂升舉例-傳統系統 LIFT EXAMPL

35、E - CONVENTIONAL SYSTEM,同樣地,當電梯達到終點時，電磁閥將非?？斓仃P(guān)閉產生一個突然地 停止，當然又是一個極不舒服地動作。在一個真正地液壓系統中，由于執行器突然起停而產生地震動會產生一個高的尖峰壓力，從原理上來說這將導致液壓泄漏。,頂升舉例- 比例系統PROPORTIONAL SYSTEM,如果電磁閥和流量控制閥被一個比例閥取代，不僅電梯的速度可以被電子地調整，而且電梯的起停也可以被控制。,頂升舉例- 比例系統LIFT EXAMPLE - PROPORTIONAL SYSTEM,比例閥能夠足夠慢地打開以提供一個平滑加速度使電梯達到最大速度。 The proportiona

36、l valve can be opened sufficiently slowly to provide a smooth acceleration of the lift up to its maximum speed.,頂升舉例- 比例系統LIFT EXAMPLE - PROPORTIONAL SYSTEM,同樣地，減加速度也能夠被控制，使閥芯運動回中位的速度變慢。 And likewise the deceleration can be controlled by slowing down the speed of spool movement back to the centre co

37、ndition.,time,Distance,運動控制 MOTION CONTROL,因此總的來說，比例閥能夠提供全部的運動控制包括： In general therefore, proportional valves are capable of providing full motion control in terms of:,time,Acceleration,Distance,MOTION CONTROL,1. A smooth and controlled acceleration of an actuator up to its maximum speed. 一個平滑和受控的加速

38、度，使執行器達到最大速度。,time,Acceleration,Velocity,Distance,MOTION CONTROL,2. Control of the actuator velocity and if necessary maintaining it constant with varying loads. 執行器速度的控制，如果必要維持其在變化負載下的穩定。,time,Acceleration,Deceleration,Velocity,Distance,MOTION CONTROL,3. A smooth deceleration with minimal pressure

39、peaks. 一個平滑的帶有最小化壓力峰值的減加速度,time,Position,Acceleration,Deceleration,Velocity,Distance,MOTION CONTROL,4. By using suitable sensing devices, the proportional valve can also be used to control the actuator stopping position to high levels of accuracy. 通過使用合適的傳感裝置，比例閥也可以被用來高精度地控制執行器的位置,time,Force,力控制 FOR

40、CE CONTROL,比例閥也能夠被用來控制執行器力地輸出，通過控制應用于執行器上地壓強。（例如在壓機中或注塑機應用）Proportional valves can also be used to control the force output from an actuator (for example in press or plastic injection moulding applications) by controlling the pressure applied to the actuator.,time,Force,FORCE CONTROL,在這樣的實例中，不僅要求控制最

41、大的執行器壓力。而且要求控制應用中或運動中的壓力等級。 In such cases it is often necessary to control not only the maximum actuator pressure but also the rate at which the pressure is applied or removed.,time,Force,FORCE CONTROL,In fact the machine cycle may consist of a series of ramps and holding periods all of which can be

42、 achieved with just the one proportional valve. 實際上機器工作周期可能由一系列的斜坡和停止階段組成，所有這些可以由一個比例閥來完成。,time,Force,FORCE CONTROL,At the end of the machine cycle the rate at which the pressure is reduced is also critical in many processes. 在機器運行周期后段，在很多工序中壓力等級的降低也是要求很嚴格的。,FORCE CONTROL,Motion and force control ca

43、n thus be achieved using proportional valves, and in some cases the same valve can be used for both motion and force control. This is usually referred to as PQ control ie. the control of both pressure (P) and flow (Q). Furthermore, all of these control functions can be achieved using electronic inpu

44、ts to the valve thus providing a simple interface to the machine controller. 運動和力的控制因此能夠通過使用比例閥來完成，同時在某些場合同一個閥能夠同時用于運動控制和力控制。這通常被稱為PQ”控制，也就是說同時控制壓力和流量。 此外，所有這些控制功能可以使用輸入到閥的電子輸入信號被完成，只需通過提供的到機械控制器的簡單接口。,ELECTRONIC CONTROL,電子控制,閥輸入信號 VALVE INPUT SIGNAL,As described earlier, the electrical current to t

45、he solenoid of a proportional valve needs to be regulated and not just simply switched on or off as is the case with a conventional valve. 作為簡單描述，提供給比例閥電磁鐵的電流需要被調節，不象應用常規閥的時僅有開關通或斷那樣簡單。,閥輸入信號 VALVE INPUT SIGNAL,In theory, this could be achieved by using a dimmer switch type component (ie. a variable

46、 resistor). Practical problems such as heat generation and drift however mean that such a device would not normally be used except for the very simplest applications. 在理論上這可以通過使用一個調光開關式的元件來完成（例如，一個可變電阻）。實際上由于發熱和漂移這樣的設備一般不被使用，除非一些最簡單的應用中。,比例閥放大器 PROPORTIONAL VALVE AMPLIFIER,Normally, the current flowing through the proportional solenoid will be controlled by some form of electronic amplifier. The amplifier itself will require a power supply (usually 12 or 24 VDC) and a command input signal. 一般地，通過比例閥電磁鐵地電流由一些形式地電子放大器控制。放大器要求一個電源和一個命令輸入信號。,比例閥放大器 PROPORTIONAL VALVE AMPLIF