粗研磨機等設備中英文對照課件

1、3.1.1.3.20 粗研磨機 主要目的 完成如下工作: 研磨各種機床 (銑刀，鉆頭); 研磨鉗工工具 (剪刀，鑿子); 制鎖 (去毛刺，倒角.); 拋光.基本技術參數 砂輪 - 40050203 mm 精度等級N 刀具推薦高度, mm 6.100 鉆頭直徑, mm 6.60 鉆頭頂角, 700.1400 間隙, 可達 200 旋轉角, +200.-10 接觸輥直徑, mm 400 研磨帶寬度, mm 80 研磨帶長度, mm 3000 研磨帶拉力 N 1000 砂輪最大直徑, mm 400 砂輪最大高度, mm 55 砂輪孔直徑, mm 50 新砂輪研磨速度, m/s 30 砂輪主軸端 (直

2、徑/長度), mm 40/40 主軸中心線到機器操作臺距離, mm 900 主軸旋轉速度, rpm 1440 電壓, V/F頻率, Hz 380/50 規格, kW 4,0 外廓尺寸, mm 10006801230 重量, kg 358General Technical Characteristics Abrasive wheels - 40050203 mm Accuracy class N Recommended height of cutters, mm 6.100 Diameter of drillbits, mm 6.60 Drillbit point angle, 700.1400

3、 Clearance, up to 200 Angle of rotation, +200.-10 Diameter of contact roller, mm 400 Width of grinding belt, mm 80 Length of grinding belt, mm 3000 Tension of grinding belt, N 1000 Maximum diameter of abrasive wheel, mm 400 Maximum height of abrasive wheel, mm 55 Diameter of hole of abrasive wheel,

4、mm 50 Grinding speed with new grinding wheel, m/s 30 End of grinding spindle (diameter/length), mm 40/40 Distance from machine stand to spindle center line, mm 900 Rotational speed of spindle, rpm 1440 Voltage, V/Frequency, Hz 380/50 Capacity, kW 4,0 Overall dimensions, mm 10006801230 Weight, kg 358

5、3.1.2.3.1 調整和移交自動機車信號方案到質監部門的設備概述設備設計用于及時監測機車部件的故障信號（()），解碼機車司機的警覺性控制裝置的設備及模塊()?？刂婆_(tái)用于檢測放大器（25/30）和解碼器（-1）和“機車司機警覺控制裝置”模塊（）（PDU）-67型。結構上，控制臺應設計成一個帶接觸板的垂直面板的臺面，并應通過連接插頭與控制臺連接，并可在臺面上自用移動。技術參數說明供電電源 U=220 V 整流電壓U=50 V 可調 40-60 V 軌道測試段25,50,75 Hz電信號的發送，并帶編碼組合的生成及自動或手動組合的可能性。3.1.2.3.1 Device for adjusting

6、 and handing over of Automatic Locomotive Signaling scheme to quality control department General Information: Device is designed for timely detection of failures in components of Automatic Locomotive Signaling (), decoding device and block of locomotive driver alertness control device (). Console fo

7、r testing of amplifier (25/30) and decoding device (-1) and block of locomotive driver alertness control device () of (PDU)-67 type. Structurally, console shall be designed as a desk with vertical panel with contact cardboards and shall be connected with the console by means of connecting plugs and

8、shall freely move on the desk. Technical Characteristics: Power supply U=220 V Rectification of voltage U=50 V Shall be adjusted 40-60 V Sending of electrical signals to rails of tested section 25,50,75 Hz with the producing of coding combinations with the possibility of automatic or manual change o

9、f combinations.3.1.2.3.12 輪對輥鍛壓力機 概述該壓力機的目的是對電力和柴油機車輪面進行輥鍛加工技術參數說明最大壓力80噸3.1.2.3.12 Wheel set Tread Roll-forging Press. General Information: The purpose of the press is to roll-forge wheel treads of electric and diesel locomotives. Technical Characteristics: Maximum force 80 ton-force3.1.2.3.13 頸部滾壓

10、機技術參數中心高度, mm . 320 中心間距 mm . 2700 頸部加工直徑, mm . 90 和 240 變速箱齒輪數, pcs . 6 每分鐘轉數 . 58; 78; 120; 160; 216; 335 切割塊數量（雙), 個 . 2 線進給范圍, mm/min . 56; 78; 115; 162 切割塊移動速度, m/min . 2,6 主驅動電機規格, kW . 11 機器尺寸, mm; 長 . 5085 寬 . 2900 高 . 13653.1.2.3.13 Neck rolling machine Technical Characteristics Height of c

11、enters, mm . 320 Distance between centers, mm . 2700 Diameters of processed neck, mm . 90 and 240 Number of gears of change gearbox, pcs . 6 Rounds per minute . 58; 78; 120; 160; 216; 335 Number of cutter blocks (double), pc . 2 Range of line feed, mm/min . 56; 78; 115; 162 Value of quick motion of

12、cutter block, m/min . 2,6 Main drive electric engine capacity, kW . 11 Machine dimensions, mm; Length . 5085 Width . 2900 Height . 13653.1.2.3.14 高頻單元概述這一單元的目的是硬化VL60k, VL80s和Ozbekiston 電力機車彈性鈍齒輪的齒牙行數。技術參數說明這是具有一個帶有供水、動力電纜和硬化鈍齒輪的高頻電感的旋轉平臺，高頻發生器的頻率是2.510KGz，規格是 100KW。3.1.2.3.14 High Frequency Unit Ge

13、neral Information: The purpose of the unit to harden teeth rows of elastic cogwheel of VL60k, VL80s and Ozbekiston electric locomotive.Technical Characteristics: It represents a rotary stand with water feed and power cable, HF inductor for hardening of cogwheel and HF generator having frequency of 2

14、.5-10KGz and capacity of 100KW3.1.2.3.24牽引發動機風扇檢測平臺 技術參數說明幾個電機的協調控制，通過他機械（通過軸連接）和電氣（發電機）彼此連接，并具有從一個到數個的控制回路。復雜操作過程中的程序控制?？煽刂迫缦聨醉?xiàng)：直流驅動電機（穩壓整流器），或交流驅動電機（單個轉換器）電子調節器（包括電流、電壓、頻率、每分鐘轉數、溫度、壓力、照明等）的設計基于任何方案（穩壓整流器、逆變器、斷路器、助力器、回掃等），和任何元件基礎（晶體管、晶閘管、MOSFET, IGBT 等。同步電機、壓縮機組、充電設備、電鍍?cè)O(shè)備、UPS等的旋轉和控制系統接觸開關單元（繼電器、啟動開

15、關等）和接觸元件（電子開關等）穩壓功能執行系統（電驅動閥、電控電阻單元、電磁線圈、電磁閥和接頭等）工作操作控制，結合在同一循環中（包括輸送帶、冷卻設備、石油和化學工業設備、氣體工業鍋爐等）技術廠房的控制（總）包括大量輸入因素、程序處理的信息在下列情況下，設備是專為室內操作：設備安裝，海拔高度不超過1000m氣候的版本和類別位置，根據GOST15150-69標準環境溫度為0度到35度相對空氣濕度不超過80% 在+25度條件下環境不會引起爆炸，粉塵等級不超過1 mg/m 大氣類型（工業區域大氣）決定的腐蝕性元素依據GOST 15150-69 關于外部環境M1的機械性因素的操作環境，依據GOST 1

16、7516-90. 技術參數說明供電網380 (220, 230, 240, 400,415, 660) V 50Hz, 220 (380, 440) V 60Hz 相位數：3執行功能：控制信號反饋的接收和生成任務分配生成數字和數字 - 模擬調節電源模塊控制過程的傳送模擬和邏輯控制信號的接收和處理繼電器和電控原件控制過程的傳送信息處理類型軟件處理。根據雇主的要求，軟件在特定項目的設計準備期間開發?；驹?，可編程微控制器為美國AMTEL的AVR系列RISC負載架構FLASH ROM程序的電子可變只讀存儲器，可重新編程達10000次，數據存儲器EEPROM重新編程次數可達達10萬次。32內部寄存器

17、內置硬件外圍設備三插頭可兼容子系列微型AVR，用于小型設備（complicity ）常規AVR，用中型設備大型AVR，用于較高設備3.1.2.3.24 Engine-fan of the stand for testing traction engines. Technical Characteristics. Coordinated control of several electrical machines, connected to each other both b mechanically (through shaft) and electrically (system engine

18、-generator) and having from one to several control loops. Program controlling of the sophisticated operation process, where controlled members include the following: Electric drive for engines of direct current (regulated rectifier) or engines of alternating current (individual convertor). Electroni

19、c regulators (of current, voltage, frequency, rounds per minute, temperature, pressure, lighting, etc) designed based on any scheme (regulated rectifier, inverter, chopper, booster, fly-back, etc) and on any element base (transistors, thyristors, MOSFET, IGBT , etc. Spinning and control systems for

20、synchronous electric engines, compressor units, charging devices, galvanic equipment, UPS, etc.) Contact switching units (relays, starter switches, etc.) and contact-free (electronic switches) Systems performing regulation functions (electrically driven valves, electrically controlled resistance uni

21、ts, magnet coils, electromagnetic valves and taps, etc.) Control of working operations, combined in one cycle (conveyor, cooling plants, equipment for oil and chemistry industry and gas industry boilers, etc) Control of one technological plant (aggregate) including large number of input factors, inf

22、ormation from which has to be processed by the program. Devices are designed for indoor operation under the following conditions: Altitude of plant installation, not more 1000 m Climatic version and category of location according to standard GOST 15150-69. Ambient temperature from 10 to 350 Relative

23、 air humidity not more 80% under +250 Environment not explosive, dust level not more 1 mg/m, corrosion active elements by type of atmosphere (atmosphere of industrial areas) according to GOST 15150-69 Group of operation conditions with regard to mechanical factor of external environment 1 according

24、to GOST 17516-90. Technical Characteristics: Power supply network 380 (220, 230, 240, 400,415, 660) V 50Hz, 220 (380, 440) V 60Hz Number of phases: 3 Performed functions: Receipt and generation of feedback control signals. Generation of assignment. Digital or digit-analog regulation. Delivery of con

25、trol action to power blocks. Receipt and processing of analog and logic control signals. Delivery of control action to relay and power control elements. Type of processing of information software processing. Software is developed during preparation of the design for specific project according to ter

26、ms of reference received from the employer. Base element programmable microcontroller of series AVR of the firm AMTEL Corporation (USA) RISC load architecture. Electrically alterable read-only memory of the programs FLASH ROM with the possibility of re-programming for up to 10,000 times and data mem

27、ory: EEPROM the possibility of re-programming for up to 100,000 times. 32 internal registers Built-in hardware peripherals Three plug-compatible subfamilies: tiny AVR for equipment of minor complicity. Classic AVR for equipment of medium complicity mega AVR for equipment of high complicity 3.1.2.3.3

28、0 噴丸室概述噴丸室用于對VL60k, VL80s 和 Ozbekiston電力機車變壓器的活動部分、牽引電機和輔助電器進行噴丸，用于去除牽引電機和電樞以及發電機及輔助及其在機務段維修時，表面的粉塵。技術參數說明額定電壓, kW, 5,5 外廓尺寸, mm, : 長 5220 寬 2900 高 2300 重量, kg, 1500 主電源電壓, V 380 主電源頻率, Hz 50 車輛規格, kgf, 90003.1.2.3.30 Blasting Chamber General Information: Blasting chamber for blasting of active part

29、 of transformers of electric locomotives series VL60k, VL80s and Ozbekiston, traction motors and auxiliary electrical machines designed to remove dust from the surface of traction motor frame and armature or the surface of generator and auxiliary machines, at the time of repair in depots. Technical

30、Characteristics: Rated voltage, kW, 5,5 Overall dimensions, mm, : length 5220 width 2900 height 2300 Weight, kg, 1500 Voltage of supply mains, V 380 Frequency of the supply mains, Hz 50 Truck capacity, kgf, 90003.1.2.3.39 同步發電機 技術特性：指示器: GS,250-20/4 功率：kW (kWA): 20 (25) 電壓： V: 230 or 400 定子電流： : 63

31、or 36 電流頻率： Hz : 50 轉速： 轉/分鐘: 1500 功率比: 0,8 帶中性點的星相連接3.1.2.3.39 Synchronous generator. Technical Characteristics: Indicators: GS,250-20/4 Power, kW (kWA): 20 (25) Voltage, V: 230 or 400 Stator current, : 63 or 36 Current frequency, Hz : 50 Rotation speed, rounds per minute: 1500 Power ratio: 0,8 Con

32、nection of phases star-connection with accessible neutral point3.1.2.3.43 張緊器總體說明：張緊器用于VL60k 和Ozbekiston系列電氣機車變壓器主變部份繞線的張緊。3.1.2.3.43 Tensioning device for the machine General Information: Tensioning device is designed for tensioning of the wire (bonding conductor) during winding of active part of t

33、ransformers of electric locomotives series VL60k, VL80s and Ozbekiston.3.1.2.3.44 用于密封和開封接線頭的大電流強度的裝置 N 3 kW U -220V.3.1.2.3.44 High-amperage device for sealing and sealing-off lead wires N 3 kW U -220V. 3.1.2.3.45配有平臺的電剪刀 最大電壓 24 V.3.1.2.3.45 Electric clippers with the stand up to 24 V. 3.1.2.3.46

34、線圈質量測定平臺，匝間短路測試，U回路電流100,150,500 V3.1.2.3.46 Stand for determination of quality of coils and testing for turn-to-turn short circuits U current 100,150,500 V. 3.1.2.3.51 電感分流器測量裝置N 0,6 kVA U -220 V 3.1.2.3.51 Device for measuring inductance of shunts N 0,6 kVA U -220 V 3.1.2.3.53 配備設備的噴砂柜總體說明：噴砂柜按照NA

35、AYKENS進行生成的清潔柜體，由噴砂柜子和噴霧柜子組成。需要提供兩個工作平臺，2個清潔器的過濾器，柜子的配件等。Technical Characteristics: 噴砂柜： : 長 28,000 mm 寬 7,000 mm 高 6,000 mm 噴拋清理和干燥柜: 長 28,000 mm 深 6,500 mm 高 7,100 mm 噴霧 0 - +21 當外部環境 -10 干燥 (+20+80)03.1.2.3.53 Shotblast cabinet with equipment General Information: Shotblast cabinet for cleaning of

36、 bodies produced by NAAYKENS. Consists of shotplast and spray pain cabinets. Supply 2 working platforms, 2 filters and filters for cleaner, parts for cabinet and spare parts. Technical Characteristics: Shotblast cabinet: length 28,000 mm width 7,000 mm height 6,000 mm Blast cleaning and drying cabin

37、et: length 28,000 mm depth 6,500 mm height 7,100 mm of spray 0 - +21 when outside temperature is -10 of drying (+20+80)03.1.2.3.63 EL交換機的試驗臺 ShR/-1. 1000850800mm. ShR/-1交換機技術要求: 該交換機用于是接收和分配電源，單相和多相網絡過載和短路保護線路。額定電壓: 380/220 V; 50Gz. 額定電流: 63 . 保護率IP40.安裝類型：安裝入口自動開關的開關能力: 4.5 kA.輸入自動群集開關的開關能力4.5 kA結構

38、：熱量自適應塑料整體尺寸：mm 20030595重量： 2.2kg3.1.2.3.63 Testing Stand for EL Switchboard ShR/-1. 1000850800mm. Technical Specifications of ShR/-1 Switchboard: The purpose of the switchboard is to receive and distribute power, protect lines from overloads and short circuits in single-phase and multi-phase networ

39、ks. Rated voltage: 380/220 V; 50Gz. Rated switchboard current: 63 . Protection rating: IP40. Type of installation: mounted. Switching capacity of inlet automatic switch: 4.5 kA. Switching capacity of input automatic cluster switch: 4.5 kA. Construction: self-extinguishing thermal plastic. Overall di

40、mensions (LxWxH), mm: 20030595. Weight: 2.2kg.3.1.2.3.85 換向片匯編工具NB418和NB514牽引電機的換向片的裝配工具被設計來形成換向片與云母段上的徑向表面螺栓連接的固定安裝。3.1.2.3.85 Commutator Bar Assembler Tool Tool for assembling commutator bars of NB418 and NB514 traction motors is designed to perform firm installation of commutator bars with mica s

41、egments on radial surface with subsequent bolting.3.1.2.3.86 爐，用于加熱和取出線圈外層絕緣該爐的設計應以保證可變的加熱溫度高達500C。整體內部尺寸應至少100010001000 mm。3.1.2.3.86 Furnace for Heating and Removal of Coil Housing Insulation The furnace shall be designed to ensure variable heating temperature up to 500 . Overall internal dimensio

42、ns shall be at least 100010001000 mm.3.1.2.3.88 牽引電機電樞線圈生產線14個工位和三線。概述：生產線被設計用于制造電力機車的完整的電樞線圈，并涵蓋所有進程的開始線切割，塑形和電樞線圈絕緣。3.1.2.3.88 Traction Motor Armature Coil Fabrication Line 14 working positions and three lines. General Information: Fabrication line is designed to fabricate complete armature coils

43、for Ozbekiston, VL80s and VL60k electric locomotives, and covers all processes beginning with wire cutting, through shaping and to armature coil insulation.3.1.2.3.89 磁極線圈組生產線，用于牽引電機外殼10個工位和三線。概述：生產線被設計用于制造完整的電力機車牽引電機的極線圈，并涵蓋所有進程的開始線切割，塑形和磁極線圈絕緣。3.1.2.3.89 Pole Coil Section Fabrication Line for Hous

44、ing of Traction Motors of Ozbekiston, VL80s and VL60k ELs. 10 working positions and three lines. General Information: Fabrication line is designed to fabricate complete pole coils for traction motors of Ozbekiston, VL80s and VL60k electric locomotives, and covers all processes beginning with wire cu

45、tting, through shaping and to pole coil insulation.3.1.2.3.92 輪面輥鍛壓機噸位80噸。 N =3千瓦。 372023102400mm。3.1.2.3.92 Tread Roll-forging Press Tonnage 80 ton. N=3kW. 372023102400mm3.1.2.3.93 電力機車輪對的平衡設備概述：該機器的目的是用于電力機車的輪平衡測量，不平衡量和角度測量值從30到3000公斤。死端絕緣體NSPKp120-25/1.2（120-25 /1,2）。技術規格：平衡轉子重量范圍，kg 100-10000最大轉

46、子直徑，mm 2500轉子軸頸直徑，mm 50-300轉子中心之間的距離，mm min/max 500-46最小可達剩余不平衡，.mm/kg 0.4轉子旋轉速度，rpm 200-1000驅動器類型 變頻異步驅動電機容量，kw 30.0站立長度，mm 50003.1.2.3.93 Balancing Machine for Wheelpairs of Ozbekiston ELs General Information: The purpose of the machine to perform balancing of electric locomotive wheelpairs to mea

47、sure values of disbalance and angles from 30 to 3000kg. Dead-end insulator NSPKp120-25/1.2 (120-25/1,2). Technical Specifications: Weight range of balanced rotors, kg 100-10000 Maximum rotor diameter, mm 2500 Diameter of rotor journal, mm 50-300 Distance between centers of rotor journals, mm min/max

48、 500-46 Minimum achievable residual unbalance, .mm./kg 0.4 Rotor rotational speed, rpm 200-1000 Type of drive Variable frequency asynchronous drive Motor capacity, kW 30.0 Length of stand, mm 50003.1.2.3.94 輪對輪面的應力削減該機器的目的是用于輪對的應力削減。輸出容量 10010KW工作頻率 100.5 KGZ工作電壓 40020 V工作電流 2403.1.2.3.94 SHF for Stress Relieving of Wheel-Pair Tread The purpose of the machine is to stress relieve wheel-pairs. Output capacity 10010 kW Operating frequency 100.5 kGz Operating voltage 40020 V Operating curr